WEBVTT - This file was automatically generated by VIMEO

0
00:00:10.300 --> 00:00:13.500
Hello everyone. Welcome to the section number six where

1
00:00:13.500 --> 00:00:16.300
 we are going to talk about the Laura and the Laura Web.

2
00:00:18.100 --> 00:00:21.400
This is video number 6.1 and we're going to talk about

3
00:00:21.400 --> 00:00:25.400
 what is the difference between Laura and the Lauren its

4
00:00:24.400 --> 00:00:27.400
 specification how it works. So guys,

5
00:00:27.400 --> 00:00:29.000
 let's get started with that.

6
00:00:31.300 --> 00:00:31.900
so firstly

7
00:00:33.600 --> 00:00:36.200
We need to understand. What is Laura and the Laura when many

8
00:00:36.200 --> 00:00:39.400
 people think that both are the same stuff. No, Laura is

9
00:00:39.400 --> 00:00:42.600
 actually modulation technique for wireless. And the Laura

10
00:00:42.600 --> 00:00:45.700
 van is an application layer protocol for iot devices,

11
00:00:45.700 --> 00:00:48.300
 which uses Laura modulation to

12
00:00:48.300 --> 00:00:52.200
 send messages from one node to Gateway and

13
00:00:51.200 --> 00:00:54.500
 lower van is a low power and long

14
00:00:54.500 --> 00:00:57.200
 range communication technique. That's why it is

15
00:00:57.200 --> 00:01:00.500
 very famous among iot devices and

16
00:01:00.500 --> 00:01:02.900
 specially it is used to monitor the remote.

17
00:01:03.700 --> 00:01:07.100
Nord as remote nodes

18
00:01:06.100 --> 00:01:10.100
 are battery powered as compared to the electric power

19
00:01:09.100 --> 00:01:12.100
 and the Laura van is a battery

20
00:01:12.100 --> 00:01:16.000
 optimized and it comes Zoom very small amount of

21
00:01:15.400 --> 00:01:18.100
 power to send and receive the

22
00:01:18.100 --> 00:01:21.500
 messages and the Laura went specification is developed by and

23
00:01:21.500 --> 00:01:23.100
 maintained by Laura Alliance.

24
00:01:24.400 --> 00:01:27.000
So now is the question. Is that how it works?

25
00:01:28.500 --> 00:01:30.300
So here is the scenario.

26
00:01:32.100 --> 00:01:35.300
This is our node. For example, you can assume that it's a smart

27
00:01:35.300 --> 00:01:38.400
 agriculture node, which is sensing the soil moisture soil temperature

28
00:01:38.400 --> 00:01:42.200
 and deployed in the field. Okay,

29
00:01:41.200 --> 00:01:44.700
 the node is fetching the

30
00:01:44.700 --> 00:01:47.300
 data and sending through the Lora when

31
00:01:47.300 --> 00:01:50.300
 to the Gateway here is the gateway

32
00:01:50.300 --> 00:01:52.500
 gateway is connected to the

33
00:01:53.400 --> 00:01:55.800
internet and on the backbone

34
00:01:56.700 --> 00:02:00.300
And we have our Laura van stack. We can

35
00:02:00.300 --> 00:02:04.400
 say that the things Network and the helium Network. It

36
00:02:03.400 --> 00:02:06.200
 depends upon your requirement which network you

37
00:02:06.200 --> 00:02:09.800
 are using behind your gateway. So Gateway sending

38
00:02:09.800 --> 00:02:12.600
 data to the Laura van backend where

39
00:02:12.600 --> 00:02:15.300
 Network server application server joint

40
00:02:15.300 --> 00:02:18.500
 server and there are different servers which are

41
00:02:18.500 --> 00:02:21.400
 synchronized which either we with each other to

42
00:02:21.400 --> 00:02:24.500
 provide the security authentication and access to

43
00:02:24.500 --> 00:02:28.200
 the backend. So this is the scenario that devices handing

44
00:02:27.200 --> 00:02:30.600
 data in a by using Laura modulation

45
00:02:30.600 --> 00:02:34.000
 to the Gateway and Gateway is connected to the internet why

46
00:02:33.600 --> 00:02:36.800
 WI-Fi 3G GSM our

47
00:02:37.600 --> 00:02:40.500
The white ethernet and then

48
00:02:40.500 --> 00:02:43.300
 everything is on Laurens stack.

49
00:02:43.300 --> 00:02:47.300
 And from there. You can send the data to the AWS iot

50
00:02:46.300 --> 00:02:48.900
 cloud or to

51
00:02:50.300 --> 00:02:53.300
Microsoft Azure Cloud any Cloud you

52
00:02:53.300 --> 00:02:57.100
 can use that. I hope you guys understand that basic scenario.

53
00:02:59.200 --> 00:03:02.700
So now there are three type of and devices you

54
00:03:02.700 --> 00:03:05.200
 can say that categories. There is a device is only one,

55
00:03:05.200 --> 00:03:08.800
 but we have a three different types of mod in

56
00:03:08.800 --> 00:03:10.000
 the class A.

57
00:03:11.600 --> 00:03:14.300
It consume lowest battery power because

58
00:03:14.300 --> 00:03:17.300
 it's a bi-directional and device but in a class B

59
00:03:17.300 --> 00:03:21.100
 by directional and device with deterministic downlink latency.

60
00:03:21.500 --> 00:03:24.500
And in the class C. It's a low latency

61
00:03:24.500 --> 00:03:27.100
 bi-directional and device if you

62
00:03:27.100 --> 00:03:30.000
 want a real-time monitoring, then you need

63
00:03:30.200 --> 00:03:32.500
 to use that class C, by the way.

64
00:03:34.500 --> 00:03:37.600
Our researchers and professional prefer to use more day

65
00:03:37.600 --> 00:03:40.300
 because it consume a very less power because it

66
00:03:40.300 --> 00:03:43.400
 only has the data you can see that practically sets the

67
00:03:43.400 --> 00:03:46.700
 data to the Gateway, but in a class C it always

68
00:03:46.700 --> 00:03:49.900
 listen to the Gateway and sense the

69
00:03:49.900 --> 00:03:52.700
 data after a few times which consume a

70
00:03:52.700 --> 00:03:55.200
 lot of battery. So in many cases

71
00:03:56.200 --> 00:03:59.600
Class A is good you can say that mod is better

72
00:03:59.600 --> 00:04:02.400
 and in many cases classic in

73
00:04:02.400 --> 00:04:05.600
 if we talk about the smart Agriculture and smart agriculture.

74
00:04:05.600 --> 00:04:08.600
 We need to take the readings after a six hours or 12

75
00:04:08.600 --> 00:04:11.200
 hours. Then I think Class A is a code that after

76
00:04:11.200 --> 00:04:14.400
 a specific period node will automatically send

77
00:04:14.400 --> 00:04:17.400
 the data the Gateway, but if we are doing a

78
00:04:17.400 --> 00:04:20.500
 remote Warehouse monitoring where is a critical product?

79
00:04:21.400 --> 00:04:24.200
I just like you can say that Madison's or some other

80
00:04:24.200 --> 00:04:27.200
 stuff is available in the warehouse. Then we can

81
00:04:27.200 --> 00:04:31.100
 use a Class C because instantly anytime a warehouse

82
00:04:30.100 --> 00:04:33.600
 manager can access the data

83
00:04:33.600 --> 00:04:37.000
 offer rate of temperature and humidity. So classy

84
00:04:36.100 --> 00:04:38.100
 is good in that case.

85
00:04:40.400 --> 00:04:44.200
Well now we need to talk about the network topologies right

86
00:04:43.200 --> 00:04:46.500
 now. Laura van

87
00:04:46.500 --> 00:04:49.800
 is using Gateway client, which is start apology and

88
00:04:49.800 --> 00:04:52.900
 Robin also work in P2P scenarios

89
00:04:52.900 --> 00:04:55.800
 and the new feature has been introduced which

90
00:04:55.800 --> 00:04:59.700
 is really by The Rock Wireless, but

91
00:04:58.700 --> 00:05:01.600
 there's a specific device which

92
00:05:01.600 --> 00:05:05.300
 is relaying the gateway to another Gateway

93
00:05:04.300 --> 00:05:07.800
 mean it's extending the range but

94
00:05:07.800 --> 00:05:10.500
 still there are research areas

95
00:05:10.500 --> 00:05:13.200
 where you guys can do a research to set

96
00:05:13.200 --> 00:05:16.100
 up a mass network and some other network topology which is

97
00:05:16.100 --> 00:05:20.400
 which are available in Bluetooth Wi-Fi, but

98
00:05:19.400 --> 00:05:22.500
 not available in Laura van.

99
00:05:23.900 --> 00:05:26.800
So if we talk about the specification as the

100
00:05:26.800 --> 00:05:27.500
 application layer.

101
00:05:29.100 --> 00:05:32.300
And this is the Laura Mac Class A Class B Class C.

102
00:05:32.300 --> 00:05:35.600
 Now. You see here. This is the Baseline. This

103
00:05:35.600 --> 00:05:38.200
 is the beacon and this is the continuous. That's why

104
00:05:38.200 --> 00:05:39.200
 it consume a lot of

105
00:05:39.900 --> 00:05:40.900
battery in the

106
00:05:42.300 --> 00:05:45.600
Mod C. And here is the Laura modulation

107
00:05:45.600 --> 00:05:48.300
 and these are the ism bands where

108
00:05:48.300 --> 00:05:51.000
 the frequency has been used. According to

109
00:05:51.200 --> 00:05:54.200
 the reader. For example in a job. We use 868 in

110
00:05:54.200 --> 00:05:58.100
 EU 433 is also available in US 915

111
00:05:57.100 --> 00:06:00.800
 and in Australia for 30 and

112
00:06:00.800 --> 00:06:04.500
 blah blah. There are different frequencies and one

113
00:06:03.500 --> 00:06:06.900
 drawback is that that frequencies are

114
00:06:06.900 --> 00:06:09.200
 not fixed in every region, every region have

115
00:06:09.200 --> 00:06:12.500
 different frequency series for the Laura and

116
00:06:12.500 --> 00:06:12.900
 devices.

117
00:06:14.200 --> 00:06:18.100
Now we need to talk about the baud rate. We have 0.3

118
00:06:17.100 --> 00:06:20.600
 kbps to 50 kbp as

119
00:06:21.200 --> 00:06:24.800
we cannot use lower when to send a

120
00:06:24.800 --> 00:06:27.500
 bigger data frequency depends upon

121
00:06:27.500 --> 00:06:28.100
 the region.

122
00:06:28.700 --> 00:06:31.600
I already talk in USA. We have a different frequency in

123
00:06:31.600 --> 00:06:35.000
 Australia. We have a different in China in Pakistan

124
00:06:34.500 --> 00:06:37.100
 in India. Even every country have

125
00:06:37.100 --> 00:06:41.500
 a different frequency according to their regulatory laws.

126
00:06:41.500 --> 00:06:44.800
 And for the network session key. It's a 128 bit

127
00:06:44.800 --> 00:06:47.600
 and the application session key 128 bit

128
00:06:47.600 --> 00:06:50.600
 later. We will discuss in detail when we're going

129
00:06:50.600 --> 00:06:53.500
 to set up our device node to connect

130
00:06:53.500 --> 00:06:56.200
 with the Gateway. So these Network session key

131
00:06:56.200 --> 00:06:59.800
 and application session Keys required for authentication and connection.

132
00:07:02.100 --> 00:07:05.500
Now it's time to talk about the applications. We have a

133
00:07:05.500 --> 00:07:09.000
 wide variety of application due to low power

134
00:07:08.300 --> 00:07:13.200
 and the long range communication many companies.

135
00:07:15.300 --> 00:07:18.600
Says in documentation that they are providing 10 kilometer 20

136
00:07:18.600 --> 00:07:21.700
 kilometer and 30 kilometer range for their nodes and gateways

137
00:07:21.700 --> 00:07:24.100
 but depending upon the area some areas

138
00:07:24.100 --> 00:07:24.400
 are.

139
00:07:26.500 --> 00:07:30.300
Heavy with the buildings and some areas are just

140
00:07:29.300 --> 00:07:32.400
 normal with the buildings. So

141
00:07:32.400 --> 00:07:35.800
 actually it depends on the area not on

142
00:07:35.800 --> 00:07:38.300
 the specification. So for example,

143
00:07:38.300 --> 00:07:40.000
 if you are running a

144
00:07:41.900 --> 00:07:44.500
Business our delivery business and you

145
00:07:44.500 --> 00:07:47.500
 want to track your writers within our

146
00:07:47.500 --> 00:07:50.200
 20 to 30 kilometer areas. Then doravan is a good

147
00:07:50.200 --> 00:07:54.000
 to use that and many organizations are using that air for

148
00:07:53.200 --> 00:07:56.100
 smart building and smart cities. Laura van

149
00:07:56.100 --> 00:08:00.000
 is the best our communication technology which

150
00:07:59.600 --> 00:08:03.400
 cuts down the expense as well as power

151
00:08:02.400 --> 00:08:05.000
 mechanisms. For example, if you

152
00:08:05.200 --> 00:08:08.300
 are deploying the smart weather stations to monitor the

153
00:08:08.300 --> 00:08:11.000
 city environment or you are

154
00:08:11.100 --> 00:08:14.100
 going to deploy the environmental monitoring solution. Then Laura van

155
00:08:14.100 --> 00:08:17.600
 is a good to go with the communication because it consume

156
00:08:17.600 --> 00:08:20.600
 a small battery. You can

157
00:08:20.600 --> 00:08:23.700
 also use to control the signals your beans are

158
00:08:23.700 --> 00:08:25.800
 one of a startup from

159
00:08:27.400 --> 00:08:30.400
I forget the country. I think

160
00:08:30.400 --> 00:08:33.900
 from the Belgium. Yeah, these guys are from Pakistan

161
00:08:33.900 --> 00:08:37.400
 and they developed solution where

162
00:08:36.400 --> 00:08:39.700
 they are monitoring the bins all across

163
00:08:39.700 --> 00:08:43.200
 the city in the Belgium by using

164
00:08:43.200 --> 00:08:46.500
 the Laura van technology. Many guys are creating a

165
00:08:46.500 --> 00:08:50.200
 very awesome solutions by using Laura

166
00:08:49.200 --> 00:08:52.300
 van and in the small Health Care, it is

167
00:08:52.300 --> 00:08:55.900
 good to go because in ambulance

168
00:08:55.900 --> 00:08:58.100
 Works within 10 to

169
00:08:58.100 --> 00:09:01.100
 20 kilometer region and the Lauren is

170
00:09:01.100 --> 00:09:04.400
 a good to go to send the data to the hospital space station

171
00:09:04.400 --> 00:09:07.700
 and in smart agriculture. Yes, it's awesome to

172
00:09:07.700 --> 00:09:11.100
 monitor all long Fields, even we can

173
00:09:10.100 --> 00:09:13.600
 monitor the cattle Farms by

174
00:09:13.600 --> 00:09:17.000
 this technology and in industrial iot. Yeah, because

175
00:09:16.800 --> 00:09:20.900
 many bigger units are

176
00:09:20.900 --> 00:09:23.300
 spreaded in many kilometers, then it

177
00:09:23.300 --> 00:09:26.500
 is a good to use the Lord of

178
00:09:26.500 --> 00:09:26.900
 and Technology.

179
00:09:27.400 --> 00:09:30.400
Because it uses a less power and the long

180
00:09:30.400 --> 00:09:33.300
 range communication. So all the scenarios are

181
00:09:33.300 --> 00:09:36.800
 awesome and I will say here early Runners

182
00:09:36.800 --> 00:09:39.400
 always win the race if you want to succeed in

183
00:09:39.400 --> 00:09:43.400
 the field of iot then start

184
00:09:42.400 --> 00:09:46.300
 using Laura van because if

185
00:09:45.300 --> 00:09:48.500
 you get experience, you will make spot

186
00:09:48.500 --> 00:09:49.100
 in the market.

187
00:09:51.100 --> 00:09:55.300
So guys next we are going to work on Smart agriculture

188
00:09:54.300 --> 00:09:58.400
 where we're going to use Laura van P2P

189
00:09:57.400 --> 00:10:00.500
 communication technique to demonstrate how

190
00:10:00.500 --> 00:10:03.400
 we can send directly data from one node to

191
00:10:03.400 --> 00:10:06.500
 another node without the usage of Gateway. So

192
00:10:06.500 --> 00:10:08.600
 guys see you in our next video. Have a good day. Bye.
