WEBVTT - This file was automatically generated by VIMEO

0
00:00:07.500 --> 00:00:10.400
Welcome back guys to video number 6.4 and this video.

1
00:00:10.400 --> 00:00:13.700
 We are going to set up a ttn gateway to

2
00:00:13.700 --> 00:00:16.400
 things stack Network. Okay, the things

3
00:00:16.400 --> 00:00:19.500
 Network actually the new name is the things stack. Okay. So

4
00:00:19.500 --> 00:00:22.200
 here's our indoor Gateway and we have a

5
00:00:22.200 --> 00:00:25.600
 two option to give up power one is a USB and the other

6
00:00:25.600 --> 00:00:26.800
 is a socket we can

7
00:00:27.700 --> 00:00:30.400
just use that if you are doing a configuration.

8
00:00:31.600 --> 00:00:34.700
then use that USB and if you

9
00:00:34.700 --> 00:00:37.300
 want to deploy at a standalone after a configuration

10
00:00:37.300 --> 00:00:38.500
 then just

11
00:00:39.900 --> 00:00:42.600
Complete a configuration and plug into the socket.

12
00:00:42.600 --> 00:00:45.400
 Okay. So before moving on we need

13
00:00:45.400 --> 00:00:45.700
 to

14
00:00:47.900 --> 00:00:50.200
Just read some data here. Okay.

15
00:00:51.300 --> 00:00:54.100
Here we will get the device UI detail.

16
00:00:57.200 --> 00:00:58.500
Okay, and

17
00:01:00.600 --> 00:01:04.300
the device Mac address Wi-Fi password and some

18
00:01:04.300 --> 00:01:07.200
 other details that we need to use. So before moving on

19
00:01:07.200 --> 00:01:10.800
 you need to copy that device password because it will be

20
00:01:10.800 --> 00:01:13.500
 used in the for the configuration. Okay. So right

21
00:01:13.500 --> 00:01:16.900
 now I'm going to just give it power using the USB.

22
00:01:17.700 --> 00:01:19.400
And you will see.

23
00:01:21.200 --> 00:01:24.900
That light is blinking, but it's not showing the hotspot 4

24
00:01:24.900 --> 00:01:26.900
 before moving on we need to.

25
00:01:28.800 --> 00:01:31.200
Put that device into the setup mode. So just

26
00:01:31.200 --> 00:01:34.500
 press on that button set up button and

27
00:01:34.500 --> 00:01:35.500
 wait for a few seconds.

28
00:01:40.900 --> 00:01:43.200
Now you see we are in setup mode and

29
00:01:43.200 --> 00:01:46.600
 we will connect with the hotspot that has

30
00:01:46.600 --> 00:01:49.200
 been provided with that device to configure the Wi-Fi

31
00:01:49.200 --> 00:01:52.200
 network and copy the device you have for the further step.

32
00:01:56.100 --> 00:01:59.400
Welcome back guys. Okay. So here is the the things

33
00:01:59.400 --> 00:02:02.300
 network, but before moving on we need to connect with the

34
00:02:02.300 --> 00:02:06.600
 hotspot and here you will see the mini Hub 803

35
00:02:05.600 --> 00:02:09.300
 D for a we

36
00:02:08.300 --> 00:02:11.900
 need to connect with the Gateway by specifying

37
00:02:11.900 --> 00:02:14.800
 the password which is mentioned on the back of the device.

38
00:02:16.200 --> 00:02:16.400
So

39
00:02:17.800 --> 00:02:19.300
yes, we need to put the key here.

40
00:02:27.600 --> 00:02:29.100
And now we are good to go with that.

41
00:02:44.900 --> 00:02:47.100
Navigate to the browser you open a

42
00:02:47.100 --> 00:02:52.100
 new tab and type 1 9 2.168.4 dot

43
00:02:51.100 --> 00:02:53.600
 one access.

44
00:02:55.900 --> 00:02:58.100
yes, now you we can

45
00:02:58.100 --> 00:02:59.200
 see here the

46
00:03:00.800 --> 00:03:03.700
Gateway UI that will be used in the Gateway set

47
00:03:03.700 --> 00:03:04.400
 up on the ttn.

48
00:03:05.300 --> 00:03:08.500
And this is the device AP Mac Wi-Fi AP password

49
00:03:08.500 --> 00:03:11.500
 and we are good to go with that. Okay, firstly copy that

50
00:03:11.500 --> 00:03:15.400
 one because we're going to use that and here

51
00:03:14.400 --> 00:03:17.900
 we need to connect it with our Wi-Fi network.

52
00:03:17.900 --> 00:03:19.300
 Okay type the password Here.

53
00:03:24.500 --> 00:03:27.500
And we are good to go with that. Just click on Save and

54
00:03:27.500 --> 00:03:28.900
 the reboot, okay.

55
00:03:31.300 --> 00:03:34.900
Okay, and now it's starting rebooting and

56
00:03:34.900 --> 00:03:36.600
 here you will see that device.

57
00:03:37.300 --> 00:03:40.500
Where has been changing and turn to the green? Okay now come

58
00:03:40.500 --> 00:03:42.000
 back to the portal. Here we have.

59
00:03:43.400 --> 00:03:46.600
That things Network and I log in here. Just click

60
00:03:46.600 --> 00:03:47.600
 on the console.

61
00:03:50.300 --> 00:03:53.100
And allow the location so it will

62
00:03:53.100 --> 00:03:57.000
 provide you the exact colorist and I

63
00:03:56.100 --> 00:04:00.000
 know it's showing as the Australia one cluster where

64
00:03:59.200 --> 00:04:03.600
 you can also choose according to your the requirement. You

65
00:04:02.600 --> 00:04:05.300
 are a part of the North America, but that's

66
00:04:05.300 --> 00:04:08.100
 good and select the country according to

67
00:04:08.100 --> 00:04:08.300
 your

68
00:04:09.600 --> 00:04:11.400
a region Okay, click on that.

69
00:04:14.500 --> 00:04:17.600
and here we have our two options create an application and

70
00:04:18.900 --> 00:04:22.000
Register Gateway, so firstly click on the register Gateway.

71
00:04:21.300 --> 00:04:24.600
 Okay, put the device eui that

72
00:04:24.600 --> 00:04:27.700
 we copied paste and confirm

73
00:04:27.700 --> 00:04:29.400
 and we're good to go with that.

74
00:04:30.200 --> 00:04:34.000
Okay claim authentication code. Okay.

75
00:04:33.400 --> 00:04:36.200
 Yes. Now we need

76
00:04:36.200 --> 00:04:39.400
 to mention the Wi-Fi password here. You

77
00:04:39.400 --> 00:04:41.700
 will see it is typically printed on the box or on the device.

78
00:04:42.500 --> 00:04:45.100
Example for the things indoor Gateway the claim

79
00:04:45.100 --> 00:04:48.300
 authentication a code is the Wi-Fi password printer on

80
00:04:48.300 --> 00:04:51.000
 the device. So here I need to provide the password.

81
00:04:52.700 --> 00:04:53.200
Why would

82
00:04:55.200 --> 00:04:58.200
Okay, and there's a device Gateway and

83
00:04:58.200 --> 00:05:01.700
 we need to select the frequency plan. So every we

84
00:05:01.700 --> 00:05:05.500
 need to select the 863 to 870 megahertz

85
00:05:04.500 --> 00:05:07.900
 sf9 for rx2 recommended

86
00:05:07.900 --> 00:05:11.500
 because my Gateway is 868.

87
00:05:12.300 --> 00:05:14.500
So I'm using that one claim Gateway.

88
00:05:15.500 --> 00:05:17.400
Okay already exist.

89
00:05:18.300 --> 00:05:20.200
Show the details. Yes.

90
00:05:26.100 --> 00:05:29.900
Okay. Yes. We need to get your ID to modify to

91
00:05:29.900 --> 00:05:32.300
 make it a unique regards already.

92
00:05:32.300 --> 00:05:36.000
 I connected that so you can type new or

93
00:05:35.300 --> 00:05:36.600
 you can say that.

94
00:05:37.900 --> 00:05:40.600
Try one. Okay claim Gateway

95
00:05:40.600 --> 00:05:42.100
 and we are good to go with that.

96
00:05:42.800 --> 00:05:44.600
and now our Gateway

97
00:05:45.300 --> 00:05:48.000
has been created and showing okay now we need

98
00:05:48.200 --> 00:05:51.300
 to see either our light is stable or not stable.

99
00:05:51.300 --> 00:05:54.600
 Okay, it will take some few time to send

100
00:05:54.600 --> 00:05:57.100
 the data and the light will be stable. And now if you

101
00:05:57.100 --> 00:06:00.300
 see here the light is changing and soon

102
00:06:00.300 --> 00:06:02.000
 it will be stabilized.

103
00:06:03.700 --> 00:06:06.300
Either you can just restart it by unplugging the

104
00:06:06.300 --> 00:06:08.100
 power cable and we are good to go with that.

105
00:06:14.500 --> 00:06:17.200
It will take some few seconds where you can say that one to

106
00:06:17.200 --> 00:06:17.500
 two minutes.

107
00:06:23.900 --> 00:06:26.800
And when it will come live it will

108
00:06:26.800 --> 00:06:29.300
 show her the devices active.

109
00:06:48.600 --> 00:06:51.300
Yes, now advice has been activated and we

110
00:06:51.300 --> 00:06:54.100
 are good to go with that. You can see there and if you

111
00:06:54.100 --> 00:06:57.900
 see here the light has been stabilized and

112
00:06:57.900 --> 00:07:00.300
 turn into the green and there's a noble blinking.

113
00:07:00.300 --> 00:07:03.600
 Okay, and if you see here the last activity 15 seconds

114
00:07:03.600 --> 00:07:06.500
 ago here. We are seeing the live data and

115
00:07:08.600 --> 00:07:09.700
or we can put the location.

116
00:07:10.600 --> 00:07:13.300
Manually here because it's not showing right

117
00:07:13.300 --> 00:07:16.300
 now on the map, but we can update from the

118
00:07:16.300 --> 00:07:18.100
 status message or you can say that.

119
00:07:19.300 --> 00:07:22.100
That allow it. Okay, and it will

120
00:07:22.100 --> 00:07:26.300
 automatically patch placement indoor and we

121
00:07:25.300 --> 00:07:27.200
 are good to go with that.

122
00:07:30.100 --> 00:07:34.300
To go the yes, we can put the latitude and longitude and then

123
00:07:33.300 --> 00:07:36.100
 we will be good to go. But right now I am

124
00:07:36.100 --> 00:07:39.700
 not going to put any latitude longitude. So come

125
00:07:39.700 --> 00:07:42.600
 back and see and we're getting the life data

126
00:07:42.600 --> 00:07:43.100
 here. Okay.

127
00:07:44.500 --> 00:07:47.300
So there are some other options like API Keys live

128
00:07:47.300 --> 00:07:50.200
 data location collaborators and we are good

129
00:07:50.200 --> 00:07:53.400
 to go with that. Okay. One more thing is that now when we

130
00:07:53.400 --> 00:07:57.100
 set up the Gateway in the region, the device

131
00:07:56.100 --> 00:07:59.600
 will automatically connect to that because

132
00:07:59.600 --> 00:08:02.200
 the things stack.

133
00:08:02.800 --> 00:08:05.600
Will be responsible for device

134
00:08:05.600 --> 00:08:08.700
 authentication. So Gateway is like a

135
00:08:08.700 --> 00:08:11.200
 GSM network whenever we have.

136
00:08:12.400 --> 00:08:15.200
Moved to the region it will automatically authenticate with

137
00:08:15.200 --> 00:08:18.400
 the same authentication. Actually Gateway or

138
00:08:18.400 --> 00:08:22.300
 Tower is not authenticating. It's a backend systems

139
00:08:21.300 --> 00:08:24.400
 or authenticating the system the same

140
00:08:24.400 --> 00:08:27.200
 technique is there that any device

141
00:08:27.200 --> 00:08:30.900
 can connect with any Gateway, but the main Network

142
00:08:30.900 --> 00:08:33.600
 server and the application server will authenticate all

143
00:08:33.600 --> 00:08:36.500
 the stuff. So guys, this is the video where we

144
00:08:36.500 --> 00:08:40.600
 set up the Gateway in the next video. We're going to connect mkr1300 to

145
00:08:40.600 --> 00:08:43.200
 the things Network. So guys see you in the next video. Have a

146
00:08:43.200 --> 00:08:44.000
 good day, bye-bye.
