So in this way we are going to fix the resolution of our Karli VNC viewer.
So right now you can see the resolution is not correct so we can fix this.
So all we have to do is start our terminal or we can do it from putty as well.
So let's just do it from party because right now you can see the clear picture.
So all we have to do is let's just minimize that and let's just do Control-C on our party
rate and let's just get out and let's just move and do our rubric treat.
That's just too close.
Right.
So we have to create our Darick deal with the we can call it FRAP 32.
And all we have to do is mount
our dev and Imam Rauf vidoe the one right.
We have to Malke this m m c block you know the one who are infected you do get equipment which we just
create to create.
And let's just do less and spread it to.
So all we have to do is to set up our resolution.
You have to fix the resolution in conflict or be active file.
So let's just do not know.
I don't think it should be in fact page 2.
So contract for 30 to configure the x key and all we have to move at the bottom
Betty not five or right at the bottom now all we have to do is copy all these come ons which I'm going
to provide the resources and basic right so so here you just have to change your rate according to your
monitored rate.
I'm within 1 9 2 0 1 0 8 0.
So I have just pasted this into my configured file.
Then you have to do control X to right.
You have to do it first and then you have to hit enter.
Right.
So the resolution is set.
Now all we have to do is to reboot our Raspberry Pi device so we can do it from here.
So that connection will last.
And it's really big fuel.
Second to the star
for I have to just connect my bike again using the same IP for all I have to do is our dash a few of
us connected with the same IP again.
Phoo Lesters.
So that's just copy this IP
and start again.
And again you have to log in with the tool and password to right.
So again we have to start our VNC server.
So this is the come on to start.
Nancy so
that we insincerities started now.
Let's just connect it with the same IP
and that could give the possible to.
And now as you can see we are getting the correct resolution according to our moderator.
So we have to go faster.
But username root
the Bosphorus to Saudi.
So as you can see we are connected with our rasberry by golly Linux machine with correct resolution
right.
So in the next studio we are going to set up our wireless adapter and set up the power settings right.