1

00:00:01,340 --> 00:00:08,850

So well now we have downloaded the required tools we have set up the colonics and my credit card.



2

00:00:08,880 --> 00:00:15,870

After that we set up the Internet connection from our next door to our Raspberry Pi device.



3

00:00:15,870 --> 00:00:19,550

Then we set up VNC server on our Callimachi.



4

00:00:19,700 --> 00:00:20,290

Right.



5

00:00:20,720 --> 00:00:25,420

And now you have also set up the resolution thing on colonics.



6

00:00:25,440 --> 00:00:30,660

Now we are going to set up our wireless by fire adapter and power settings right.



7

00:00:30,670 --> 00:00:34,250

So these are the two steps which we are going to do now.



8

00:00:34,540 --> 00:00:39,090

So let's just move into our Carly Raspberry Pi device.



9

00:00:41,620 --> 00:00:45,770

So here you can see we are connected with the Internet right now.



10

00:00:46,240 --> 00:00:50,290

So you have to connect our buy less adapter.



11

00:00:50,320 --> 00:01:01,260

So as you can see on the on the list I have connected two wireless adapters and one is the Belgian one



12

00:01:01,590 --> 00:01:04,060

which is in Raspberry Pi tree.



13

00:01:04,180 --> 00:01:14,180

So all I have to do is connect any of the wireless data with my home network so I have to enter a password



14

00:01:14,180 --> 00:01:14,920

or to.



15

00:01:22,260 --> 00:01:23,990

And then I have to connect



16

00:01:28,400 --> 00:01:30,840

for the wireless adaptor is connected now.



17

00:01:30,860 --> 00:01:31,900

Right.



18

00:01:32,000 --> 00:01:46,580

So let me just make it on the correct resolution and let's just open that terminal and do one fake.



19

00:01:46,640 --> 00:01:54,880

So as you can see that line zero is connected with our own natural so.



20

00:01:55,050 --> 00:01:58,410

We are going to connect and other wireless adapter as well.



21

00:02:05,720 --> 00:02:07,950

We again have during the past third



22

00:02:18,800 --> 00:02:21,760

right that's just Quantic again.



23

00:02:21,910 --> 00:02:27,750

So as you can see Lanzi and like but are not connected with our homework.



24

00:02:27,940 --> 00:02:30,820

Since the board Gorga IP.



25

00:02:31,040 --> 00:02:40,130

So then zero IP is what my We've got fanfics it got to 5 got 1.3 as you can see and land one IP is 1



26

00:02:40,130 --> 00:02:48,950

9 2 about 1 6 8 2 5 got 1 and 5 right so let's just do that we have set up the wireless adapter.



27

00:02:49,160 --> 00:02:57,050

And the next thing we have to do is we have to set up the power manager for we have to click on power



28

00:02:57,060 --> 00:02:57,610

manager



29

00:03:00,700 --> 00:03:08,290

and by the way we are sending power managers so that once you start doing our real world scenarios B-B



30

00:03:08,410 --> 00:03:12,580

disconnect from RB into server many time.



31

00:03:12,610 --> 00:03:21,360

And we will keep the breadth of device on for a long time so that we don't lose connection or we don't



32

00:03:21,360 --> 00:03:24,660

lose the system doesn't go into sleep mode.



33

00:03:24,790 --> 00:03:27,270

You have to make sure all these things right.



34

00:03:27,310 --> 00:03:29,460

So all we have to go into system.



35

00:03:29,800 --> 00:03:45,610

And then in ective we have to do never right and display we have to go into display and skip our management.



36

00:03:45,610 --> 00:03:48,640

We just have to turn it off and blank.



37

00:03:48,660 --> 00:03:55,670

Often you have to make it 60 minutes and then you have to go through security and lock.



38

00:03:55,690 --> 00:03:56,380

It's clean.



39

00:03:56,390 --> 00:04:04,780

When system is going to fall asleep we'll just have to check back and you have to select automatically



40

00:04:04,780 --> 00:04:06,150

lock the session.



41

00:04:06,190 --> 00:04:11,160

You just have to rule never right these other settings that you have to do.



42

00:04:11,260 --> 00:04:18,430

So you have to go into power manager then you have to go into display and blank after you have to make



43

00:04:18,430 --> 00:04:22,410

it 60 and turn it off as well.



44

00:04:22,450 --> 00:04:23,020

Right.



45

00:04:23,260 --> 00:04:31,200

And then into security you just have to uncheck that lock screen and automatically lock session tomorrow.



46

00:04:31,300 --> 00:04:32,070

Right.



47

00:04:32,100 --> 00:04:36,480

Then let's just go there our settings are now done.



48

00:04:36,550 --> 00:04:43,840

We are almost finished with our installation and the next studio we are going to see how we can make



49

00:04:43,930 --> 00:04:46,120

our VNC server orto start.



50

00:04:46,170 --> 00:04:46,840

Right.



51

00:04:46,890 --> 00:04:51,950

Right now you have to you know we are giving that connection with that you can afford.



52

00:04:51,970 --> 00:04:55,600

And then we are starting our VNC server to party.



53

00:04:55,630 --> 00:04:56,110

Right.



54

00:04:56,200 --> 00:05:03,370

But the next would you'll be able to see how we can make our VNC server Arto a start when we start our



55

00:05:03,480 --> 00:05:04,520

Raspberry Pi device.



56

00:05:04,530 --> 00:05:05,000

Right.



57

00:05:05,020 --> 00:05:08,960

So let's just see this thing in the next video.