1
00:00:00,570 --> 00:00:05,550
OK, now it's time to scan all the books by default when we run the map.

2
00:00:06,850 --> 00:00:08,020
This one, OK?

3
00:00:08,080 --> 00:00:13,360
Remember when we run it like this, it will scan the first 1000.

4
00:00:14,880 --> 00:00:15,270
What?

5
00:00:16,370 --> 00:00:23,420
So in my case, I don't need that or one specific, but in my case, I need to scan all of the boats

6
00:00:23,750 --> 00:00:25,910
how to do such a thing, the same command.

7
00:00:26,180 --> 00:00:34,080
But this time it's increased the font size listed, but this time it will be DSP Dash like this.

8
00:00:34,370 --> 00:00:37,040
And you can see it will take longer time.

9
00:00:38,600 --> 00:00:39,140
OK.

10
00:00:39,440 --> 00:00:45,530
This time it scan and find that there are other boards like these ones, as you can see.

11
00:00:46,280 --> 00:00:47,830
So it's scanned all the boats.

12
00:00:48,110 --> 00:00:56,270
By the way, we have other options on either shortcuts like DSP one slash, which means one from one

13
00:00:56,300 --> 00:00:56,690
to.

14
00:00:57,730 --> 00:01:02,110
I'm six, five, five, three five like this.

15
00:01:03,030 --> 00:01:04,140
It will do the same job.

16
00:01:04,890 --> 00:01:12,360
So either to provide the board range or to put it like this Dash B Dash.

17
00:01:12,690 --> 00:01:13,090
OK?

18
00:01:13,950 --> 00:01:15,050
P stands for what?

19
00:01:15,090 --> 00:01:15,840
It's a symbol.

20
00:01:16,020 --> 00:01:24,120
All you want just to check if the bought at bought for four hundred forty three, that's three years

21
00:01:24,150 --> 00:01:25,050
is open.

22
00:01:25,050 --> 00:01:34,640
So you can put that like this eighty slash or three comma then, but four for three or but one one two,

23
00:01:34,650 --> 00:01:35,250
for example.

24
00:01:35,330 --> 00:01:38,700
OK, so it will start scanning only these three ports.

25
00:01:38,910 --> 00:01:45,780
So as you can see, the 80 is open, the floor for three actually is closed and the one 100.