1
00:00:00,230 --> 00:00:01,710
Your patience pays off.

2
00:00:01,730 --> 00:00:08,480
Subnetting allows you to create multiple logical networks that exist within a single class A, B or

3
00:00:08,510 --> 00:00:09,290
C network.

4
00:00:09,760 --> 00:00:16,090
If you do not subnet, you are only able to use one network from your class A, B or C network, which

5
00:00:16,090 --> 00:00:18,340
is well, pretty unrealistic.

6
00:00:19,260 --> 00:00:26,430
So subnetting is the process of designating some high order bits from the host part as part of the network

7
00:00:26,430 --> 00:00:30,720
prefix and adjusting the subnet mask appropriately.

8
00:00:31,140 --> 00:00:34,950
So this divides a network into smaller subnets.

9
00:00:35,100 --> 00:00:42,270
In other words, in order to subnet a network, extend the natural mask with some of the high order

10
00:00:42,270 --> 00:00:48,240
bits from the host ID portion of the address in order to create a subnetwork ID.

11
00:00:49,250 --> 00:00:50,780
So I'll give you an example.

12
00:00:51,110 --> 00:01:02,990
Let's take a class C network of 192.168.2.0, which has a natural mask of 255.255.255.0.

13
00:01:03,720 --> 00:01:09,960
You can create subnets by moving two bits from the host part to the network prefix.

14
00:01:10,800 --> 00:01:14,820
Now, the last octet of the network mask starts with 11.

15
00:01:16,130 --> 00:01:19,460
So this eight bit corresponds to 192.

16
00:01:19,490 --> 00:01:20,630
In decimal form.

17
00:01:21,810 --> 00:01:26,700
Now the network ID is 26 bit in Cidr notation.

18
00:01:26,700 --> 00:01:30,660
It's now a slash 26 subnetwork.

19
00:01:31,810 --> 00:01:40,210
You can find the network prefix by a bitwise and operation between the IP address and the subnet mask.

20
00:01:42,940 --> 00:01:50,710
The number of subnetworks available and the number of possible hosts in a network may be readily calculated.

21
00:01:51,910 --> 00:01:57,220
In our example, two bits were borrowed to create Subnetworks.

22
00:01:57,900 --> 00:02:02,850
Thus creating two to the power of two possible subnets.

23
00:02:03,540 --> 00:02:04,410
You with me.

24
00:02:04,890 --> 00:02:09,389
So now let's calculate the maximum number of hosts for each subnet.

25
00:02:11,030 --> 00:02:14,510
In our example, 26 bits are used to define the network.

26
00:02:15,180 --> 00:02:20,160
The remaining bits after the subnet, bits are used for dressing hosts within the subnet.

27
00:02:20,910 --> 00:02:29,940
So the host part of the IP address is six bit all zeros and the all ones values for the host ID are

28
00:02:29,940 --> 00:02:32,310
not allowed in a subnetwork right.

29
00:02:32,400 --> 00:02:38,160
These two values are reserved for the network address and broadcast address respectively.

30
00:02:39,530 --> 00:02:46,460
So the maximum number of hosts which can be addressed in these subnetworks is two to the power of six

31
00:02:46,490 --> 00:02:49,850
minus two, which equals 62.

32
00:02:50,660 --> 00:02:51,410
Excellent.

33
00:02:51,500 --> 00:02:55,700
So as a result, the IP addresses of the devices in the subnetwork.

34
00:02:55,700 --> 00:03:09,260
192.168.2.128 slash 26 will be between 192.168.2.129 and 192.168.2.190.

