1
00:00:00,200 --> 00:00:02,660
Internet control message protocol.

2
00:00:03,020 --> 00:00:10,970
ICMP is an error reporting protocol that network devices like routers use to generate error messages

3
00:00:10,970 --> 00:00:16,460
to the source IP address when network problems prevent delivery of IP packets.

4
00:00:17,220 --> 00:00:21,000
ICMP messages are sent in several situations.

5
00:00:21,180 --> 00:00:25,290
For example, when a datagram cannot reach its destination.

6
00:00:25,410 --> 00:00:29,880
When the gateway does not have the buffering capacity to forward a datagram.

7
00:00:30,210 --> 00:00:35,490
And when the gateway can direct the host to send traffic on a shorter route.

8
00:00:36,520 --> 00:00:40,810
The Internet protocol is not designed to be absolutely reliable.

9
00:00:41,440 --> 00:00:42,190
I'll explain why.

10
00:00:42,220 --> 00:00:42,820
Hold on.

11
00:00:43,510 --> 00:00:50,200
The purpose of these control messages is to provide feedback about problems in the communication environment,

12
00:00:50,230 --> 00:00:52,510
not to make IP reliable.

13
00:00:53,470 --> 00:00:59,290
There's still no guarantees that a datagram will be delivered or a control message will be returned.

14
00:00:59,870 --> 00:01:04,610
Some datagrams may still be undelivered without any report of their loss.

15
00:01:05,540 --> 00:01:10,560
The higher level protocols that use IP must implement their own reliability.

16
00:01:10,580 --> 00:01:14,570
Procedures if reliable communication is required.

17
00:01:16,000 --> 00:01:21,130
So the ICMP header starts after the IPv4 header.

18
00:01:22,180 --> 00:01:28,210
All ICMP packets have an eight byte header and variable size data section.

19
00:01:29,050 --> 00:01:32,290
The first four bytes of the header have a fixed format.

20
00:01:32,910 --> 00:01:38,010
While the last four bytes depend on the type and code of that ICMP packet.

21
00:01:39,230 --> 00:01:44,420
ICMP type and code in the header identifies the control message.

22
00:01:45,040 --> 00:01:48,880
Some of the ICMP control messages are shown in this slide.

23
00:01:49,030 --> 00:01:53,620
So Ping is the most well known application of the ICMP.

24
00:01:54,560 --> 00:02:01,670
It operates by sending ICMP echo request packets to the target host and then waiting for an ICMP echo

25
00:02:01,670 --> 00:02:02,420
reply.

