1
00:00:00,460 --> 00:00:02,440
So now we're on the last step.

2
00:00:03,040 --> 00:00:05,110
Fix the problems and run Kali.

3
00:00:06,010 --> 00:00:12,490
Now, in this lecture, I will assume that you do have trouble with network connections and I'm going

4
00:00:12,490 --> 00:00:16,090
to give you some solutions so that you can fix the problem.

5
00:00:17,940 --> 00:00:20,070
Now, hopefully you're not facing such a problem.

6
00:00:20,070 --> 00:00:27,240
So if you don't have a network situation, please, you don't have to apply any of these solutions in

7
00:00:27,240 --> 00:00:27,840
this lesson.

8
00:00:27,840 --> 00:00:33,480
But it's good to have you on the ride and you can always sharpen your troubleshooting skills.

9
00:00:34,480 --> 00:00:40,360
So first off, let's reboot the machine to understand whether the problem is an exception for the initial

10
00:00:40,360 --> 00:00:41,170
run or not.

11
00:00:41,740 --> 00:00:45,200
So I shut down the virtual machine because I want to look at the settings of.

12
00:00:48,480 --> 00:00:52,560
And click the Settings button, Click Processors and memory.

13
00:00:53,220 --> 00:00:56,340
I want to make the Ram three gigabytes.

14
00:01:00,660 --> 00:01:04,200
So now I can click the start button to boot it again.

15
00:01:05,600 --> 00:01:08,540
Now let me look at the network adapter while it's booting.

16
00:01:08,720 --> 00:01:10,630
Click on network adapter.

17
00:01:10,640 --> 00:01:14,690
Internet is shared in nat mode and that's what I want.

18
00:01:20,760 --> 00:01:23,550
Username and password are both Kali.

19
00:01:27,890 --> 00:01:29,960
Okay, we are in again.

20
00:01:30,320 --> 00:01:35,670
So let's check the network connection by clicking the network icon at the upper right hand corner.

21
00:01:35,720 --> 00:01:39,430
So I think there's a problem on the Dhcp of the VMware.

22
00:01:39,520 --> 00:01:42,830
Well, anyway, we can live without Dhcp as well.

23
00:01:43,700 --> 00:01:46,470
So I'm looking at the wired network.

24
00:01:46,490 --> 00:01:47,360
Don't be confused.

25
00:01:47,360 --> 00:01:53,060
Even though you share the wireless connection of your host machine, it's simulated as a wired network

26
00:01:53,060 --> 00:01:54,020
in the VM.

27
00:01:54,710 --> 00:01:58,210
So let's open a terminal screen and look at the networking service.

28
00:01:58,220 --> 00:02:05,360
If it's running right service networking and press tab twice to see the available commands of the service.

29
00:02:06,110 --> 00:02:12,680
Networking service does not have status command, so I'll assume that it's not started and try to start

30
00:02:12,680 --> 00:02:12,950
it.

31
00:02:16,000 --> 00:02:20,750
And if you are still not connected at this point, let's go to network settings.

32
00:02:20,770 --> 00:02:25,870
You can go to network settings via advanced network settings under the menu.

33
00:02:29,470 --> 00:02:35,920
Or you can right click on the network icon in the upper right corner and select edit connections.

34
00:02:37,500 --> 00:02:41,040
Now click the wheel icon under the wire tab.

35
00:02:41,070 --> 00:02:41,730
Okay.

36
00:02:41,730 --> 00:02:42,660
Okay.

37
00:02:42,660 --> 00:02:47,040
I go to the IPV four tab to set the IP manually.

38
00:02:47,070 --> 00:02:48,930
Click the manual option.

39
00:02:49,050 --> 00:02:51,150
I'll choose an IP for the new collie.

40
00:02:51,180 --> 00:03:00,120
Now the IP block of my virtual network is 172.161.131.0 through 24.

41
00:03:00,270 --> 00:03:02,460
So I'll choose an IP from this block.

42
00:03:02,910 --> 00:03:10,260
Netmask is 255.255.255.0 for 24 IP block.

43
00:03:10,350 --> 00:03:16,320
As far as I remember, the gateway is 172.16.131.2.

44
00:03:19,210 --> 00:03:21,880
So I'll use 8.8.8.8.

45
00:03:21,910 --> 00:03:25,210
That's the Google DNS as my DNS server.

46
00:03:25,240 --> 00:03:26,020
Okay.

47
00:03:27,630 --> 00:03:29,130
Let me look at another VMs.

48
00:03:29,160 --> 00:03:30,480
Network settings.

49
00:03:30,480 --> 00:03:32,280
So this is Carly I'm currently using.

50
00:03:32,280 --> 00:03:34,980
Go to network settings, Select Wired Settings.

51
00:03:36,730 --> 00:03:39,070
Click the wheel icon under the wired tab.

52
00:03:39,100 --> 00:03:41,150
Go to the IPv4 tab.

53
00:03:41,170 --> 00:03:43,210
Yes, the gateway is correct.

54
00:03:47,300 --> 00:03:51,140
Okay, I'll reboot the machine to be sure that the changes are applied.

55
00:03:55,640 --> 00:03:56,660
But completed.

56
00:04:01,190 --> 00:04:05,990
So open a terminal screen type Ifconfig to see the IP address of the new Cali.

57
00:04:05,990 --> 00:04:09,170
It's 225, just as we said.

58
00:04:09,530 --> 00:04:11,630
So let's ping a remote system.

59
00:04:11,630 --> 00:04:12,530
For example.

60
00:04:12,560 --> 00:04:16,310
Google DNS 8.8.8.8.

61
00:04:17,510 --> 00:04:20,480
Yes, we receive the response packages, the networks.

62
00:04:20,480 --> 00:04:20,779
Okay.

63
00:04:20,779 --> 00:04:25,160
Now so to double check, open a browser and visit any website.

