1
00:00:00,520 --> 00:00:02,469
So now we're on the last step.

2
00:00:03,040 --> 00:00:05,130
Fix the problems and run Kali.

3
00:00:06,060 --> 00:00:12,510
Now, in this lecture, I will assume that you do have trouble with network connections and I'm going

4
00:00:12,510 --> 00:00:16,110
to give you some solutions so that you can fix the problem.

5
00:00:17,900 --> 00:00:20,090
Now, hopefully you're not facing such a problem.

6
00:00:20,090 --> 00:00:27,260
So if you don't have a network situation, please, you don't have to apply any of these solutions in

7
00:00:27,260 --> 00:00:27,860
this lesson.

8
00:00:27,860 --> 00:00:33,500
But it's good to have you on the ride and you can always sharpen your troubleshooting skills.

9
00:00:34,470 --> 00:00:40,380
So first off, let's reboot the machine to understand whether the problem is an exception for the initial

10
00:00:40,380 --> 00:00:41,190
run or not.

11
00:00:41,790 --> 00:00:45,360
So I shut down the virtual machine because I want to look at the settings of it.

12
00:00:45,570 --> 00:00:52,110
Now select Kali and click the Settings button and click the system tab.

13
00:00:52,350 --> 00:00:55,500
I want to make the Ram three gigabytes.

14
00:00:57,860 --> 00:01:01,400
So now I can click the start button to boot it again.

15
00:01:07,710 --> 00:01:10,530
Username and password are both Kali.

16
00:01:14,870 --> 00:01:16,940
Okay, we are in again.

17
00:01:17,300 --> 00:01:22,640
So let's check the network connection by clicking the network icon at the upper right hand corner.

18
00:01:22,700 --> 00:01:26,400
So I think there's a problem on the Dhcp of the VMware.

19
00:01:26,490 --> 00:01:29,810
Well, anyway, we can live without Dhcp as well.

20
00:01:30,680 --> 00:01:33,450
So I'm looking at the wired network.

21
00:01:33,470 --> 00:01:34,340
Don't be confused.

22
00:01:34,340 --> 00:01:40,040
Even though you share the wireless connection of your host machine, it's simulated as a wired network

23
00:01:40,040 --> 00:01:40,970
in the VM.

24
00:01:41,690 --> 00:01:45,200
So let's open a terminal screen and look at the networking service.

25
00:01:45,200 --> 00:01:52,340
If it's running right service networking and press tab twice to see the available commands of the service.

26
00:01:53,060 --> 00:01:59,630
Networking service does not have status command, so I'll assume that it's not started and try to start

27
00:01:59,630 --> 00:01:59,900
it.

28
00:02:02,950 --> 00:02:07,760
And if you are still not connected at this point, let's go to network settings.

29
00:02:07,780 --> 00:02:12,850
You can go to network settings via advanced network settings under the menu.

30
00:02:17,320 --> 00:02:23,740
Or you can right click on the network icon in the upper right corner and select edit connections.

31
00:02:25,320 --> 00:02:28,860
Now click the wheel icon under the wire tab.

32
00:02:28,890 --> 00:02:29,570
Okay.

33
00:02:29,580 --> 00:02:30,510
Okay.

34
00:02:30,510 --> 00:02:34,890
I go to the IPV four tab to set the IP manually.

35
00:02:34,920 --> 00:02:36,780
Click the manual option.

36
00:02:36,900 --> 00:02:38,910
I'll choose an IP for the new Kali.

37
00:02:39,700 --> 00:02:46,840
Now the IP block of my virtual network is ten .0.2.0 through 24.

38
00:02:47,110 --> 00:02:49,360
So I'll choose an IP from this block.

39
00:02:49,690 --> 00:02:57,040
Netmask is 255.255.255.0 for 24 IP block.

40
00:02:58,980 --> 00:03:00,930
The gateway is 10.0.

41
00:03:00,930 --> 00:03:02,310
.2.2.

42
00:03:03,460 --> 00:03:07,420
So I can use Google DNS as my DNS server and root.

43
00:03:07,450 --> 00:03:09,100
Now you can click the save button.

44
00:03:10,560 --> 00:03:14,370
Okay, I'll reboot the machine to be sure that the changes are applied.

45
00:03:26,380 --> 00:03:27,370
Bout completed.

46
00:03:28,400 --> 00:03:35,120
So open the terminal screen and first type sudo su to switch the user to root so that you don't have

47
00:03:35,120 --> 00:03:41,720
to write sudo for every command that requires root privileges and then run the ifconfig command to see

48
00:03:41,720 --> 00:03:44,270
the IP address of Kali.

49
00:03:44,930 --> 00:03:46,310
And it's 200.

50
00:03:47,390 --> 00:03:49,460
So let's ping a remote system.

51
00:03:49,460 --> 00:03:50,330
For example.

52
00:03:50,360 --> 00:03:54,080
Google DNS 8.8.8.8.

53
00:03:55,390 --> 00:03:57,710
Yes, we receive the response packages.

54
00:03:57,730 --> 00:03:58,300
The networks.

55
00:03:58,300 --> 00:03:58,570
Okay.

56
00:03:58,570 --> 00:04:02,980
Now, so to double check, open a browser and visit any website.

