1
00:00:00,230 --> 00:00:02,330
So now is the final step.

2
00:00:02,540 --> 00:00:05,420
Run the VM and fix any problems.

3
00:00:17,350 --> 00:00:22,390
So we installed the Kali Linux 64 bit installer image VM in the previous lecture.

4
00:00:22,390 --> 00:00:27,180
Now let's boot it and just make sure everything's okay.

5
00:00:27,190 --> 00:00:28,930
I know it will be, don't you?

6
00:00:31,160 --> 00:00:31,490
All right.

7
00:00:31,490 --> 00:00:38,000
So before booting, let's do the network settings for the connection of the installed virtual machines.

8
00:00:39,120 --> 00:00:45,150
If you are using VirtualBox because of its architecture, you should create a Nat network.

9
00:00:46,670 --> 00:00:54,560
And if you are using a virtual machine in nat mode without configuring any Nat network, a network is

10
00:00:54,560 --> 00:01:01,670
created for that virtual machine, but it doesn't see any of the other virtual machines, even if they

11
00:01:01,670 --> 00:01:03,560
are in nat mode.

12
00:01:06,100 --> 00:01:14,350
So go to VirtualBox preferences, select net networks under network segment and add a new net network.

13
00:01:15,920 --> 00:01:20,120
And then add these two Kali machines to the same net network.

14
00:01:45,410 --> 00:01:50,090
And let's start the call from ISO machine that we installed recently.

15
00:01:51,470 --> 00:01:56,960
Now, while it's booting, you can start another Kali machine that we previously installed with the

16
00:01:56,990 --> 00:01:58,250
Ova file.

17
00:02:10,780 --> 00:02:13,750
Again with Callie and Callie.

18
00:02:20,980 --> 00:02:24,820
Now this is the call from Eso machine.

19
00:02:25,840 --> 00:02:31,210
Okay, so we'll log in with the username and password that you set during the installation.

20
00:02:31,860 --> 00:02:34,140
And welcome back.

21
00:02:35,400 --> 00:02:35,580
All right.

22
00:02:35,580 --> 00:02:41,640
So let's take a quick look at the menu of the default xfce desktop environment.

23
00:02:42,300 --> 00:02:45,480
And it is here in the upper left hand corner.

24
00:02:45,480 --> 00:02:48,000
And these are the default tools of Kali.

25
00:02:51,070 --> 00:02:56,800
So first of all, let's open up a terminal screen and switch the user to the root account.

26
00:02:57,290 --> 00:03:00,850
Then this way we don't have to write the pseudo command every time.

27
00:03:02,510 --> 00:03:05,930
And look at the IP address assigned by the VM.

28
00:03:09,190 --> 00:03:10,810
So let's ping a remote system.

29
00:03:10,810 --> 00:03:16,780
For example, a Google DNS 8.8.8.8 to check the internet connection.

30
00:03:18,310 --> 00:03:19,930
We received the packets.

31
00:03:19,960 --> 00:03:23,800
No packet loss and we have internet connection now.

32
00:03:24,250 --> 00:03:29,320
So just to double check, I open the web browser and visit any website on the internet.

33
00:03:34,300 --> 00:03:35,710
And it's okay now.

34
00:03:37,690 --> 00:03:42,430
So now let's check the connectivity between the virtual machines and the Net network.

35
00:03:43,060 --> 00:03:47,200
So first, let's look at the IP of the other Kali machine.

36
00:03:56,120 --> 00:03:59,360
So it's ten .0. 2.200.

37
00:04:00,560 --> 00:04:03,620
So let's ping the machines one to another.

38
00:04:15,060 --> 00:04:19,019
Okay, so they are connected and that means ready to hack.

