1
00:00:00,240 --> 00:00:03,150
So let's create our first project in three.

2
00:00:04,250 --> 00:00:05,730
At this point, we have a choice to make.

3
00:00:05,730 --> 00:00:12,030
So whether we run three on the local server or within a virtual machine.

4
00:00:13,050 --> 00:00:19,090
Because the primary reason for using Gns3 is simulating a network with switches and routers.

5
00:00:19,110 --> 00:00:25,080
All we have to do is select the run only legacy iOS on my computer.

6
00:00:25,350 --> 00:00:28,170
That's the option which is not selected by default.

7
00:00:29,860 --> 00:00:33,040
So we leave this page with the rest of the default values.

8
00:00:35,770 --> 00:00:41,080
It asks for the root permission for Oubridge to interact with a network interface.

9
00:00:41,080 --> 00:00:44,950
So click yes to allow and enter the admin password.

10
00:00:45,890 --> 00:00:51,500
Local server is started up and gns3 connected to it successfully.

11
00:00:51,500 --> 00:00:52,970
So click next.

12
00:00:53,540 --> 00:00:57,020
Finally, we have the summary of the project settings.

13
00:00:57,020 --> 00:00:59,930
So click finish to end the project setup.

14
00:01:01,420 --> 00:01:06,320
So as soon as you click, finish the new appliance template window appears.

15
00:01:06,340 --> 00:01:12,340
So at this point, we're going to add an iOS router using a real iOS image.

16
00:01:12,340 --> 00:01:15,820
So select the option and click okay.

17
00:01:16,600 --> 00:01:24,430
So I'm assuming that you're a first time user of Gns3 and as such, you need to be aware that in order

18
00:01:24,430 --> 00:01:31,060
to use this application software, at the minimum, you need to download one more piece of software.

19
00:01:31,420 --> 00:01:36,970
So we already downloaded and installed the Gns3 software itself, which actually comes bundled with

20
00:01:36,970 --> 00:01:39,340
a whole bunch of other stuff which isn't really needed.

21
00:01:39,340 --> 00:01:45,250
And then you're also going to download at least one Cisco iOS software image.

22
00:01:45,820 --> 00:01:53,860
I would suggest that you get hold of software images that support either the 3725 series router or the

23
00:01:53,860 --> 00:01:56,290
3745 series router.

24
00:01:57,050 --> 00:02:00,650
If you can get hold of these, that'll be the best.

25
00:02:01,410 --> 00:02:09,509
So if you don't know anything about Cisco routers at all, you're just looking for some advice on which

26
00:02:09,509 --> 00:02:12,040
particular one to choose for your iOS image.

27
00:02:12,060 --> 00:02:17,070
I would select a 3007 25 or a 3745 image.

28
00:02:17,280 --> 00:02:23,730
If you get software images for one, that's 3700 series of routers that comes along with like a switching

29
00:02:23,730 --> 00:02:24,540
module.

30
00:02:25,410 --> 00:02:27,800
You don't have to download anything else.

31
00:02:27,810 --> 00:02:29,550
There's nothing that you have to do.

32
00:02:29,550 --> 00:02:36,450
But basically you can turn on a switch that operates within or inside of that router, and then I can

33
00:02:36,450 --> 00:02:37,980
do this switching and routing.

34
00:02:38,010 --> 00:02:41,700
Most of the other platforms do not support that.

35
00:02:42,360 --> 00:02:47,670
So in my particular case, I'm going to use a 3725 image.

36
00:02:48,990 --> 00:02:57,030
And now I get to the point when we get to choose what iOS image we want to import into S3 And here is

37
00:02:57,030 --> 00:03:02,250
where you get to browse for wherever you've downloaded the Cisco iOS software to.

38
00:03:02,400 --> 00:03:06,480
I'm going to use a 3725 image, which I've already downloaded.

39
00:03:06,720 --> 00:03:14,100
If you don't have it already, please search for the keywords such as Cisco, iOS 3725 Image download

40
00:03:14,100 --> 00:03:17,460
and you'll find an image and then download it for yourself.

41
00:03:18,290 --> 00:03:21,890
I'd love to show it to you, but I don't want to mess with legal issues.

42
00:03:21,920 --> 00:03:24,800
It's not so hard, and I'm sure that you can easily find one.

43
00:03:25,740 --> 00:03:29,910
Now, click Browse to select the iOS image.

44
00:03:30,240 --> 00:03:31,530
So let me find my image.

45
00:03:31,530 --> 00:03:32,130
Here it is.

46
00:03:33,680 --> 00:03:35,840
Select it and click open.

47
00:03:36,780 --> 00:03:39,780
And yes, I would like to decompress the image.

48
00:03:42,370 --> 00:03:43,630
So click next.

49
00:03:43,990 --> 00:03:44,920
Give a name.

50
00:03:45,580 --> 00:03:47,320
Make it up whatever you want.

51
00:03:47,710 --> 00:03:50,530
I'm going to choose C 3725.

52
00:03:50,560 --> 00:03:52,150
That's pretty good for me.

53
00:03:52,330 --> 00:03:59,200
So now before I leave the screen, there's also a little box here that says this is an ether switch

54
00:03:59,200 --> 00:04:05,770
router, so you can just have every router in your topology as an ether switch.

55
00:04:05,860 --> 00:04:08,240
I'm going to leave that unchecked for now.

56
00:04:08,260 --> 00:04:10,930
We'll create a legacy router right now.

57
00:04:12,380 --> 00:04:18,740
So make the default ram 256MB and then click next.

58
00:04:19,130 --> 00:04:25,070
So here's where I get to select what modules or port adapters I want in my chassis.

59
00:04:25,840 --> 00:04:34,330
It comes with a fast Ethernet slot already on it, and now I've selected in another slot so I can put

60
00:04:34,330 --> 00:04:38,780
another fast Ethernet card and then I'll put another fast Ethernet card.

61
00:04:38,800 --> 00:04:39,520
Why not?

62
00:04:39,550 --> 00:04:43,990
So as I go forward, I've got some wick slots available.

63
00:04:44,940 --> 00:04:48,240
Once again, these slots are available in the 3725.

64
00:04:48,240 --> 00:04:53,400
Depending upon that software that you're using, you might not have all of these available to you.

65
00:04:54,280 --> 00:04:58,840
So I'm going to put some serial interfaces in these slots.

66
00:04:58,840 --> 00:05:06,700
So I'm going to have tons of interfaces in every single one of my routers to give me lots of flexibility

67
00:05:06,700 --> 00:05:10,210
in the types of topologies that I want to design.

68
00:05:10,720 --> 00:05:11,200
Don't worry.

69
00:05:11,200 --> 00:05:14,560
I mean, we can change all these settings after the setup as well.

70
00:05:15,520 --> 00:05:16,990
So now click next.

71
00:05:19,410 --> 00:05:22,290
No, I don't want to waste time for the idle PC.

72
00:05:22,620 --> 00:05:27,840
We can simply say that it's used to make the CPU usage much more effective.

73
00:05:27,840 --> 00:05:35,070
So just click idle PC finder and let Gns3 find one for you.

74
00:05:36,020 --> 00:05:37,910
And now we can hit finish.

75
00:05:42,010 --> 00:05:44,530
And a router is available to us.

76
00:05:45,140 --> 00:05:47,930
Now we can use it in our virtual topology.

77
00:05:49,260 --> 00:05:49,560
All right.

78
00:05:49,560 --> 00:05:53,640
So here are the preferences of three.

79
00:05:53,640 --> 00:05:59,010
The router is added under the Dynamips iOS Routers menu.

80
00:05:59,490 --> 00:06:03,210
You can see the menu on the tree at the left hand side of the window.

81
00:06:03,210 --> 00:06:06,420
So click okay to close the preferences window.

82
00:06:07,720 --> 00:06:11,530
Now is the time to name our first project.

83
00:06:11,860 --> 00:06:16,420
As you can see here, the project location changes as well.

84
00:06:16,420 --> 00:06:18,010
When you change the project name.

85
00:06:18,010 --> 00:06:20,740
So click okay once you finished naming it.

86
00:06:21,370 --> 00:06:24,460
And this is your main three window.

87
00:06:25,230 --> 00:06:30,660
So now let's create another iOS router template and make it an either switch router.

88
00:06:30,690 --> 00:06:32,040
This time around.

89
00:06:32,870 --> 00:06:38,630
Now from the three main menu Select Preferences from the left hand Side Menu.

90
00:06:38,630 --> 00:06:43,940
Select iOS Routers under the Dynamips Submenu and Click New.

91
00:06:44,240 --> 00:06:48,110
We can use our existing image right now, so click next.

92
00:06:49,110 --> 00:06:54,000
And I'd like to turn this router into a switch by selecting the ether switch box.

93
00:06:54,330 --> 00:06:58,050
Let's go ahead and change the Ram to 256MB.

94
00:06:59,080 --> 00:07:04,690
So now you can see it automatically populates one of those slots with a 16 port switch module.

95
00:07:04,690 --> 00:07:07,690
And if you want, you can just leave it that way.

96
00:07:07,690 --> 00:07:13,360
If the only thing that you're planning in the router is for 16 port ethernet switch.

97
00:07:13,930 --> 00:07:14,710
But.

98
00:07:15,200 --> 00:07:17,630
What I want to do is add more flexibility.

99
00:07:17,630 --> 00:07:21,800
So I'm going to add some more slots just like the previous scenario.

100
00:07:23,070 --> 00:07:25,200
Let the app find an idle PC.

101
00:07:35,710 --> 00:07:37,210
And then click finish.

102
00:07:37,780 --> 00:07:40,310
Now we have two different router templates.

103
00:07:40,330 --> 00:07:45,490
The first one is a classic router and the second one is an ether switch router.

104
00:07:45,760 --> 00:07:52,540
Now you can click edit to remove or add new slots, change a name, change a size, whatever you want

105
00:07:52,540 --> 00:07:53,770
to do to customize it.

