1
00:00:00,360 --> 00:00:03,450
And now is the moment you've all been waiting for.

2
00:00:04,220 --> 00:00:07,970
It's time to build our network in three.

3
00:00:09,600 --> 00:00:14,880
So I'm in my host machine and you don't see the three.

4
00:00:14,940 --> 00:00:16,020
It's closed at the moment.

5
00:00:16,020 --> 00:00:20,490
So I'll go to the applications menu and click the three icon to run it.

6
00:00:21,030 --> 00:00:25,800
So let's create a new project, or you can use the project that we created before.

7
00:00:26,910 --> 00:00:29,580
Expand routers from the device's toolbar.

8
00:00:29,910 --> 00:00:34,350
As you see installed items is selected from the combo box above.

9
00:00:35,220 --> 00:00:39,990
The only router available is C 3725.

10
00:00:40,560 --> 00:00:43,320
That's what I imported a few lectures before.

11
00:00:44,430 --> 00:00:49,470
So I'll drag it and drop it into the workspace from the switches menu.

12
00:00:49,620 --> 00:00:55,710
Drag an ether switch router that we created before and drop it into the workspace.

13
00:00:56,740 --> 00:01:01,070
Now go to the end devices and drag and drop a vpcs.

14
00:01:01,090 --> 00:01:07,390
Here Vpcs are the end user computer simulations of three.

15
00:01:08,190 --> 00:01:13,920
They're very lightweight and have a very restricted ability, but it'll be enough to test the network

16
00:01:13,920 --> 00:01:15,210
configurations.

17
00:01:16,020 --> 00:01:18,540
And now I'll just add a second.

18
00:01:18,540 --> 00:01:19,680
Vpcs.

19
00:01:19,950 --> 00:01:20,760
Okay.

20
00:01:21,700 --> 00:01:26,410
Now we have a router, an ether switch and two PCs in our network.

21
00:01:26,500 --> 00:01:31,480
They all have their default names on top given by the Gns3 app.

22
00:01:32,280 --> 00:01:37,170
So now I want to design the network and label the devices accordingly.

23
00:01:38,260 --> 00:01:44,200
Click the labels icon on the toolbar and put a label under the PC one.

24
00:01:44,320 --> 00:01:52,720
This PC will be in IP block of 192.168.10.0 slash 24.

25
00:01:52,990 --> 00:01:56,410
Let's say it's the Vlan ten.

26
00:01:58,480 --> 00:02:04,300
Now to create a new label, you can right click on an existing one and select duplicate.

27
00:02:05,930 --> 00:02:10,310
Right click the label again and select text edit to edit the text.

28
00:02:10,610 --> 00:02:22,700
So let's put the second PC into Vlan 20, which is in the IP block of 192.168.20.0 24.

29
00:02:23,060 --> 00:02:27,980
Now click on the last icon on the Devices toolbar to connect the devices.

30
00:02:29,090 --> 00:02:35,660
Click the router, select the port you want to connect, and then select the switch and select the port

31
00:02:35,690 --> 00:02:37,280
of the switch again.

32
00:02:38,040 --> 00:02:45,150
I connect the fast Ethernet zero zero port of the router with the fast Ethernet one one of the switch.

33
00:02:46,150 --> 00:02:46,830
Good.

34
00:02:46,840 --> 00:02:50,380
So now connect the PC one with the switch.

35
00:02:51,000 --> 00:02:57,390
Click Switch select Fast Ethernet one two and click PC one.

36
00:02:58,010 --> 00:03:01,190
And it already has a single network interface.

37
00:03:01,190 --> 00:03:02,330
Ethernet zero.

38
00:03:03,770 --> 00:03:08,080
Now do the same with the second PC and use a port of the switch.

39
00:03:08,090 --> 00:03:08,720
For example.

40
00:03:08,720 --> 00:03:11,510
Fast Ethernet 110.

41
00:03:12,130 --> 00:03:14,530
We connected all the nodes on the workspace.

42
00:03:14,530 --> 00:03:18,910
So now we can click the connect icon to disable the connect mode.

43
00:03:21,800 --> 00:03:26,780
Then in the toolbar we have a button named show hide interface labels.

44
00:03:27,200 --> 00:03:32,780
If you click it when the labels are hidden, you'll see the labels of each interface connected.

45
00:03:33,610 --> 00:03:38,680
F stands for fast Ethernet and E stands for the Ethernet.

46
00:03:39,470 --> 00:03:42,260
And you can move the labels as you wish.

47
00:03:43,320 --> 00:03:44,910
Now let's start the notes.

48
00:03:45,830 --> 00:03:52,040
We can start them one by one, by right clicking on them and selecting start from the menu or from the

49
00:03:52,040 --> 00:03:52,670
toolbar.

50
00:03:52,670 --> 00:03:56,360
Click the green triangle to start all the nodes at once.

51
00:03:56,810 --> 00:03:58,640
Now all the nodes are running.

52
00:03:59,210 --> 00:04:03,020
So now is the time to create our network topology.

53
00:04:03,470 --> 00:04:08,070
I'll create two VLANs and add the PCs to their VLANs.

54
00:04:08,090 --> 00:04:11,150
First, we'll create the virtual LANs.

55
00:04:11,750 --> 00:04:15,080
Right click on the switch and click console.

56
00:04:15,760 --> 00:04:16,370
Good.

57
00:04:16,390 --> 00:04:20,440
Welcome to the command line interface of a Cisco ether switch.

58
00:04:20,470 --> 00:04:21,459
Look familiar?

59
00:04:22,260 --> 00:04:24,570
So press enter to get started.

60
00:04:31,690 --> 00:04:35,620
Type Vlan database and go there.

61
00:04:36,250 --> 00:04:40,330
You can use the tab key to complete the keywords in this console.

62
00:04:40,810 --> 00:04:45,850
So instead you can use the short form of the keywords directly.

63
00:04:46,470 --> 00:04:49,890
If the keyword is the only available option for that short form.

64
00:04:51,250 --> 00:04:57,790
So for example, I wrote Vlan space d a and hit the tab key.

65
00:04:58,150 --> 00:05:00,010
The key word is completed.

66
00:05:00,770 --> 00:05:01,820
Database.

67
00:05:02,710 --> 00:05:08,200
So that means that database is the only option here for De.

68
00:05:09,030 --> 00:05:17,430
And as a result if I type villain space DA and hit enter here I'd be in the villain database mode.

69
00:05:18,850 --> 00:05:19,330
Right.

70
00:05:19,330 --> 00:05:30,880
So here we are in Vlan database mode to create Vlan ten type vlan id number ten, name it for example

71
00:05:30,910 --> 00:05:40,450
it, HR or whatever you want, I'll name it Vlan ten and leave it at that hit enter and Vlan ten is

72
00:05:40,450 --> 00:05:41,200
created.

73
00:05:42,160 --> 00:05:48,430
So similarly, let's create Vlan 20 with the id number 20.

74
00:05:50,140 --> 00:05:53,230
Type exit to exit the Vlan database mode.

75
00:05:53,260 --> 00:05:57,010
Now, as you exit, the changes are applied.

76
00:05:57,660 --> 00:05:58,800
So that was pretty cool.

77
00:05:59,430 --> 00:06:06,220
Okay, so let's go into the Vlan database mode again to check whether the VLANs were actually created.

78
00:06:06,240 --> 00:06:08,370
So type show current.

79
00:06:09,110 --> 00:06:12,500
And here are the villains we created a couple of seconds ago.

80
00:06:13,380 --> 00:06:19,350
Vlan ten with the ID number of ten and here's Vlan 20 with the id number of 20.

81
00:06:19,530 --> 00:06:24,630
So type exit again and we're on the route of the switch console.

82
00:06:25,660 --> 00:06:31,210
So now is it time to configure interfaces and add the PCs to their VLANs?

83
00:06:31,750 --> 00:06:35,440
The first command we type is configure terminal.

84
00:06:36,040 --> 00:06:42,850
And as mentioned before, you can simply type conf T to enter configuration mode.

85
00:06:44,130 --> 00:06:47,190
Now we need to select the interface to configure.

86
00:06:48,610 --> 00:06:52,630
Type int space F and hit tab.

87
00:06:54,200 --> 00:06:57,230
F will be completed as fast Ethernet.

88
00:06:57,270 --> 00:06:58,560
You see how that works.

89
00:06:58,580 --> 00:07:03,560
So now we can write the identifier of the switch port 1/2.

90
00:07:04,700 --> 00:07:10,940
Alternatively, you can directly type F1/2 as seen in the gns3 workspace.

91
00:07:11,890 --> 00:07:20,320
Now we are in the config mode of the interface F12, which just happens to be the port we connected

92
00:07:20,320 --> 00:07:21,850
to the PC one.

93
00:07:22,660 --> 00:07:25,090
Now to identify the mode of the port.

94
00:07:25,120 --> 00:07:29,290
Type switch port mode access first.

95
00:07:29,950 --> 00:07:37,000
Then to assign the port to the Vlan ten type switch port access Vlan ten.

96
00:07:37,980 --> 00:07:41,490
Where ten is the ID number of Vlan ten.

97
00:07:42,680 --> 00:07:43,160
No.

98
00:07:43,160 --> 00:07:45,170
To shut down and exit.

99
00:07:45,790 --> 00:07:51,430
We exit from the port's config mode, but we are still in the terminal configuration mode.

100
00:07:51,580 --> 00:07:59,500
So while we're here, let's configure the other port which is connected to PC to interface fast Ethernet

101
00:07:59,530 --> 00:08:00,820
one slash ten.

102
00:08:02,740 --> 00:08:05,530
Switchport mode access.

103
00:08:06,610 --> 00:08:06,910
Okay.

104
00:08:06,910 --> 00:08:10,360
Well, right here, I want to show you a well, a tip.

105
00:08:10,810 --> 00:08:15,280
You can use a question mark in any one of the commands.

106
00:08:15,280 --> 00:08:21,820
If you put a question mark after the mode, it says you can either use access or trunk here.

107
00:08:22,730 --> 00:08:28,190
An access port can only have one Vlan configured on the interface.

108
00:08:28,220 --> 00:08:30,740
It can carry traffic for only one Vlan.

109
00:08:30,740 --> 00:08:31,310
Right.

110
00:08:31,580 --> 00:08:39,140
A trunk port can have two or more vlans configured on the interface that can carry traffic for several

111
00:08:39,140 --> 00:08:40,880
Vlan simultaneously.

112
00:08:42,140 --> 00:08:46,280
So Switchport access Vlan 20 goes right here.

113
00:08:47,460 --> 00:08:47,970
No.

114
00:08:47,970 --> 00:08:50,100
Shut down and exit.

115
00:08:50,960 --> 00:08:51,650
Great.

116
00:08:51,650 --> 00:08:54,790
So we've configured the interfaces connected to the PC.

117
00:08:54,800 --> 00:08:58,700
So now let's configure the port connected to the router.

118
00:08:59,430 --> 00:09:05,820
INT for interface F1/1 to enter the config mode of that interface.

119
00:09:06,740 --> 00:09:09,050
Switchport mode is trunk.

120
00:09:11,250 --> 00:09:12,420
Wait a second.

121
00:09:12,420 --> 00:09:22,200
And yes, the port has become a dot one trunk dot one queue is a well known name of the 802.1 queue,

122
00:09:22,230 --> 00:09:30,240
which is the networking standard that supports virtual LANs or VLANs on an I triple E 802.3 Ethernet

123
00:09:30,270 --> 00:09:31,080
network.

124
00:09:31,440 --> 00:09:36,130
Now type Switchport Trunk encapsulation dot one queue.

125
00:09:37,110 --> 00:09:39,540
No to shut down and exit.

126
00:09:39,660 --> 00:09:43,810
Type exit again to exit the config mode completely.

127
00:09:43,830 --> 00:09:48,390
Then type SR to make the configurations persistent.

128
00:09:50,260 --> 00:09:51,070
Excellent.

129
00:09:51,370 --> 00:09:53,830
Now let's configure the router.

130
00:09:54,370 --> 00:09:57,220
Right click on the router and select console.

131
00:09:58,890 --> 00:10:00,750
The ports are being initialized now.

132
00:10:02,760 --> 00:10:03,210
Okay.

133
00:10:03,210 --> 00:10:12,690
Entering into the config mode is the same type config terminal or simply conf t and hit enter.

134
00:10:13,170 --> 00:10:17,400
So the only interface of our router is fast ethernet zero zero.

135
00:10:17,400 --> 00:10:20,640
So type interface F0/0.

136
00:10:21,450 --> 00:10:23,130
No IP address.

137
00:10:23,990 --> 00:10:24,410
No.

138
00:10:24,410 --> 00:10:25,160
Shut down.

139
00:10:25,760 --> 00:10:26,720
And look at that.

140
00:10:26,720 --> 00:10:28,040
The port is up right now.

141
00:10:28,680 --> 00:10:33,240
So hit exit and we'll exit from the interface for now.

142
00:10:34,190 --> 00:10:41,720
So now we're ready to configure the subinterfaces and the settings of the VLANs are decided here.

143
00:10:42,600 --> 00:10:51,750
To enter the Subinterface configuration type interface fast Ethernet 0/0.1 where dot one identifies

144
00:10:51,750 --> 00:10:53,760
the sub interface.

145
00:10:54,000 --> 00:11:01,140
Right Type encapsulation dot one Q and a question mark to see the options.

146
00:11:01,680 --> 00:11:03,420
Look at that here.

147
00:11:03,450 --> 00:11:06,060
Vlan ID is one of the options.

148
00:11:06,060 --> 00:11:10,770
So type encapsulation dot one q ten.

149
00:11:11,460 --> 00:11:13,710
Now type IP address.

150
00:11:13,710 --> 00:11:22,920
192.168.10.1255.255.255.0

151
00:11:22,920 --> 00:11:24,270
and press enter.

152
00:11:25,050 --> 00:11:37,320
192.168.10.1 Is the IP address of the router for this Vlan and 255.255.255.0 is a subnet mask of the

153
00:11:37,320 --> 00:11:47,190
network, so the IP block of the Vlan ten will be 192.168.10.0 slash 24.

154
00:11:48,170 --> 00:11:48,560
No.

155
00:11:48,560 --> 00:11:50,780
To shut down and exit.

156
00:11:51,850 --> 00:11:55,300
And here we are back in the configure terminal mode.

157
00:11:56,230 --> 00:12:05,800
So now we'll apply the same sub config for Vlan 20 type interface f0 slash 0.2.

158
00:12:05,830 --> 00:12:06,850
This time.

159
00:12:07,780 --> 00:12:13,540
Encapsulation one cue and the Vlan ID 20.

160
00:12:13,990 --> 00:12:20,860
So let's use the 192.168.20.0 slash 24 ip block for this Vlan.

161
00:12:21,520 --> 00:12:23,470
So type IP address.

162
00:12:23,470 --> 00:12:30,370
192.168.20.1255.255.255.0.

163
00:12:31,260 --> 00:12:33,990
And no shut down and exit.

164
00:12:35,050 --> 00:12:43,420
Now exit again to exit the configure terminal mode as well and type R to make the configurations persistent.

165
00:12:45,620 --> 00:12:46,520
See what I mean?

166
00:12:46,520 --> 00:12:53,060
It's a it's quite a process, but I'm glad you're hanging in there because we haven't even gotten to

167
00:12:53,060 --> 00:12:54,110
the fun stuff yet.

168
00:12:54,940 --> 00:12:58,360
Now's the time to configure the network interfaces of the PCs.

169
00:12:58,720 --> 00:13:01,930
So right click on the PC and select console.

170
00:13:02,500 --> 00:13:09,010
If you place a question mark and press enter, you'll see all the available commands in VPC console.

171
00:13:09,670 --> 00:13:14,800
So as I mentioned before, this is an end user computer simulation of gns3.

172
00:13:14,800 --> 00:13:20,770
But not to worry, it's enough to test the configurations of the networks that we created earlier.

173
00:13:22,150 --> 00:13:28,000
And as you can see here, IP command is used to configure the IP settings of the VPC.

174
00:13:29,150 --> 00:13:36,410
And here you can show or use the shortcut s h, and that's going to print the information about the

175
00:13:36,410 --> 00:13:37,280
VPC.

176
00:13:37,580 --> 00:13:42,170
So type show IP to see the current IP settings.

177
00:13:42,530 --> 00:13:46,670
And as you can see here, VPC has no IP address at the moment.

178
00:13:46,850 --> 00:13:49,460
So type IP and a question mark.

179
00:13:50,070 --> 00:13:52,650
You'll see the options of the IP command.

180
00:13:53,400 --> 00:13:58,320
And as you can see here, you'll be able to assign an IP address using this command.

181
00:13:58,320 --> 00:14:01,620
And an example is given right there to help as well.

182
00:14:02,230 --> 00:14:04,960
So let's assign an IP address for the VPC.

183
00:14:06,420 --> 00:14:19,840
IP 192.168.10.2 slash 24 To identify the subnet mask and the gateway is 192.168.10.1.

184
00:14:19,860 --> 00:14:20,580
Perfect.

185
00:14:20,580 --> 00:14:21,720
It's our router.

186
00:14:22,200 --> 00:14:27,660
So when you press enter it checks to see if there's any duplication and if everything's okay.

187
00:14:27,660 --> 00:14:30,060
It shows a summary just like this one.

188
00:14:30,220 --> 00:14:33,930
Assigned IP Address, Subnet Mask and Gateway.

189
00:14:34,500 --> 00:14:38,220
So now we can ping the router to check the configuration.

190
00:14:38,430 --> 00:14:39,720
Perfect.

191
00:14:39,750 --> 00:14:41,760
See, this is where we get all the answers.

192
00:14:41,790 --> 00:14:48,390
Now let's configure the other VPC because that one is working perfectly just the way we wanted it to.

193
00:14:48,750 --> 00:14:51,840
The steps are exactly the same.

194
00:14:52,470 --> 00:14:54,330
Right click and open the console.

195
00:14:56,200 --> 00:14:56,950
Type.

196
00:14:56,980 --> 00:15:02,520
IP 192.168.20.2 slash 24.

197
00:15:02,530 --> 00:15:07,480
192.168.20.1 and hit enter.

198
00:15:11,390 --> 00:15:13,370
Ping the router to check the config.

199
00:15:15,310 --> 00:15:19,510
And here are the answers, all the answers you've ever been looking for.

200
00:15:20,020 --> 00:15:20,590
Right.

201
00:15:20,590 --> 00:15:25,030
So go to PC one and ping PC two.

202
00:15:26,130 --> 00:15:30,960
You should be able to see the reply packets just like these ones.

203
00:15:31,380 --> 00:15:36,060
And now ping PC one from PC two.

204
00:15:36,210 --> 00:15:38,550
And everything looks perfect on my side.

205
00:15:38,550 --> 00:15:39,540
What about you?

206
00:15:39,870 --> 00:15:40,770
Right as rain.

207
00:15:40,770 --> 00:15:41,400
Right.

208
00:15:41,940 --> 00:15:42,600
Excellent.

209
00:15:42,600 --> 00:15:43,740
So let's move on.

