1
00:00:00,520 --> 00:00:04,010
Okay, so now let's go one step further and add our collie to the network.

2
00:00:04,030 --> 00:00:05,200
Are you ready for this?

3
00:00:06,810 --> 00:00:14,160
First of all, let me change the labels from the IP block to the IP address and this one as well.

4
00:00:15,040 --> 00:00:17,200
And create the labels for VLANs.

5
00:00:19,600 --> 00:00:23,620
From the S3 Main Menu Select Preferences.

6
00:00:24,500 --> 00:00:29,660
In the tree at the left hand side, you see that there is a VMware VMs.

7
00:00:30,340 --> 00:00:33,130
It's a menu item under the VMware menu.

8
00:00:34,250 --> 00:00:35,010
You got it?

9
00:00:35,030 --> 00:00:36,080
Okay, Select it.

10
00:00:37,320 --> 00:00:41,160
Now here I have a few VM templates that I've added before.

11
00:00:41,910 --> 00:00:48,300
You are supposed to have nothing here at the moment unless you added something before as well.

12
00:00:49,010 --> 00:00:57,320
So in any event, click new and a new VMware VM template window appears and the VMware virtual machines

13
00:00:57,320 --> 00:00:59,690
are already listed in the combo box.

14
00:01:00,390 --> 00:01:03,450
So select Kali Linux 2018.

15
00:01:03,690 --> 00:01:11,340
Do not select use as a linked base VM because it's experimental at the moment and it could have some

16
00:01:11,340 --> 00:01:13,590
bugs that could just throw you off.

17
00:01:13,590 --> 00:01:17,550
So right here, let's just click finish.

18
00:01:18,400 --> 00:01:22,420
All right, Now we have a template in G three.

19
00:01:22,450 --> 00:01:26,830
You can edit it here or delete it just like the router that we added before.

20
00:01:27,590 --> 00:01:29,630
Okay, so its name is too long.

21
00:01:29,630 --> 00:01:35,900
So let's click edit, change the name and click okay and okay again.

22
00:01:36,870 --> 00:01:39,760
Now we're ready to add it to our network.

23
00:01:39,780 --> 00:01:47,070
So from the devices toolbar, if you expand the end devices, that's where you see Kelly.

24
00:01:47,700 --> 00:01:50,430
So drag and drop it into the workspace.

25
00:01:51,560 --> 00:01:54,170
And a label showing its IP address.

26
00:01:54,200 --> 00:01:58,760
I'll make it IP 10.3 and.

27
00:01:59,480 --> 00:02:01,280
It'll be in Vlan ten.

28
00:02:03,560 --> 00:02:08,690
So click the last item in the Devices toolbar to connect Colley to the switch.

29
00:02:09,430 --> 00:02:15,280
Click the switch, select the interface, and I'll select fast Ethernet 1/3.

30
00:02:16,360 --> 00:02:17,340
And click Collie.

31
00:02:18,080 --> 00:02:20,750
Select the only option Ethernet zero.

32
00:02:21,230 --> 00:02:21,900
Uh oh.

33
00:02:21,920 --> 00:02:23,050
We got a problem.

34
00:02:23,060 --> 00:02:24,440
But no worries.

35
00:02:24,440 --> 00:02:25,760
We're troubleshooters here, right?

36
00:02:25,880 --> 00:02:28,760
It's not an unexpected situation.

37
00:02:29,490 --> 00:02:31,830
An error message appears at the top right corner.

38
00:02:31,830 --> 00:02:38,310
It says we have to stop the VM and allow DNS three to change the attachment type.

39
00:02:38,610 --> 00:02:42,750
You can see the same message in the S3 console at the bottom.

40
00:02:43,880 --> 00:02:46,550
Go to Cali here and shut it down.

41
00:02:48,410 --> 00:02:51,830
And from the virtual machine menu item select shut down.

42
00:02:51,860 --> 00:02:53,960
It's going to take about two minutes.

43
00:02:54,900 --> 00:03:01,740
But while Kylie is shutting down, let's go to three and allow it to change the VMs attachment type.

44
00:03:02,010 --> 00:03:10,260
So from three, the main menu select preferences, select VMware VMs at the left hand side tree and

45
00:03:10,260 --> 00:03:12,480
click Collie, and then click edit.

46
00:03:13,340 --> 00:03:22,730
Now you can select the network tab and here there's a check box to allow Gns3 to override VMware adapter.

47
00:03:22,730 --> 00:03:27,500
So check it and click okay and then okay again.

48
00:03:29,420 --> 00:03:33,680
And we're still waiting for Kylie to be shut down.

49
00:03:35,530 --> 00:03:38,680
Okay, so let's try to connect Cali to the switch again.

50
00:03:41,870 --> 00:03:44,300
But we have another error message.

51
00:03:44,420 --> 00:03:48,860
It says Nat is already configured on the network adapter.

52
00:03:49,420 --> 00:03:53,920
So let's allow anyone to use any adapter.

53
00:03:54,630 --> 00:03:54,960
Okay.

54
00:03:54,960 --> 00:03:56,530
So I think I know the problem.

55
00:03:56,550 --> 00:03:57,330
Do you?

56
00:03:58,050 --> 00:03:59,010
We'll find out.

57
00:03:59,700 --> 00:04:06,540
So we have to remove Carly from the workspace because this one has been added before.

58
00:04:06,540 --> 00:04:10,380
We allow Gns3 to configure VMware's network interface.

59
00:04:11,050 --> 00:04:14,380
So now I'll add Carly again by drag and drop.

60
00:04:15,950 --> 00:04:17,810
Now connected the switch.

61
00:04:20,720 --> 00:04:21,290
Okay.

62
00:04:21,290 --> 00:04:25,910
But before starting Cali, let me clear the S3 console.

63
00:04:25,940 --> 00:04:27,890
Now let's start Cali again.

64
00:04:28,010 --> 00:04:28,450
What?

65
00:04:28,460 --> 00:04:30,260
Another error message?

66
00:04:30,560 --> 00:04:32,960
Okay, no worries.

67
00:04:33,020 --> 00:04:35,600
I already knew all of these messages beforehand.

68
00:04:35,630 --> 00:04:41,720
I just want to show you what happens when the S3 needs to add Cali to it.

69
00:04:42,770 --> 00:04:49,760
So this message means that we need to have a custom network interface created in VMware and available

70
00:04:49,760 --> 00:04:51,770
to be used by Gns3.

71
00:04:52,710 --> 00:05:01,020
So now from VMware Fusion, I'll start Virtual Machine library from the main menu Select Preferences.

72
00:05:01,840 --> 00:05:07,660
If you're using VMware Workstation or player, just go to the preferences there.

73
00:05:08,660 --> 00:05:10,370
Now Click network.

74
00:05:11,130 --> 00:05:17,550
As you see, I have no custom interface at the moment to be able to make changes.

75
00:05:18,030 --> 00:05:25,400
I'll click on the padlock icon, enter the password of my user, and now I can add a custom interface.

76
00:05:25,410 --> 00:05:31,290
So click the plus icon here and VM net three is added.

77
00:05:31,990 --> 00:05:37,500
And leave everything with the default values because Gns3 three will configure it for us.

78
00:05:37,510 --> 00:05:41,170
So click apply and now we can close these windows.

79
00:05:42,530 --> 00:05:47,750
So now let's go back to Cali and start from the three again.

80
00:05:48,560 --> 00:05:50,720
And sure enough, it starts.

81
00:05:56,480 --> 00:05:58,340
So log in as root user.

82
00:06:00,170 --> 00:06:03,740
And finally, we're on the Kylie desktop.

83
00:06:04,790 --> 00:06:08,260
Now let's look at the network settings of Kylie.

84
00:06:09,120 --> 00:06:11,010
This icon is a network interface.

85
00:06:11,010 --> 00:06:14,340
When you click it, you will see the interface options.

86
00:06:14,430 --> 00:06:18,720
As you see, the current interface is custom VM net three.

87
00:06:19,450 --> 00:06:25,330
Now, alternatively, we can look at the network setting from the wrench icon, which brings us to a

88
00:06:25,330 --> 00:06:30,610
General Settings panel, and then we can select network adapter from here.

