1
00:00:00,580 --> 00:00:01,330
Great.

2
00:00:01,330 --> 00:00:05,410
So we attach Carly to our network physically.

3
00:00:05,770 --> 00:00:10,570
Now we have to make the configurations to make Carly a part of Vlan ten.

4
00:00:12,940 --> 00:00:17,500
So as you can see here, my collie is not running at the moment.

5
00:00:17,590 --> 00:00:21,520
I'll go to switches console to configure the connection.

6
00:00:22,520 --> 00:00:25,430
It'll be similar to the configurations of the VPC.

7
00:00:26,650 --> 00:00:28,240
Type conf.

8
00:00:28,270 --> 00:00:28,810
T.

9
00:00:30,050 --> 00:00:32,240
To enter the configured terminal mode.

10
00:00:33,060 --> 00:00:42,390
And then int F13 to configure the interface fast Ethernet 1/3, which is used for Kali.

11
00:00:43,350 --> 00:00:47,010
We have seen these before, so I'll just go through it quickly.

12
00:00:47,040 --> 00:00:47,940
Switchport.

13
00:00:47,940 --> 00:00:48,990
Mode access.

14
00:00:50,920 --> 00:00:53,290
Switchport Access Vlan ten.

15
00:00:54,960 --> 00:00:55,320
No.

16
00:00:55,320 --> 00:00:57,060
Shut down Exit.

17
00:00:57,570 --> 00:00:58,920
Exit again.

18
00:00:58,950 --> 00:01:03,750
Go to the route and to write the configuration to make it persistent.

19
00:01:04,230 --> 00:01:05,190
Okay.

20
00:01:05,310 --> 00:01:12,180
To check the current situation of the interfaces, we can now use show IP interface brief.

21
00:01:17,000 --> 00:01:20,780
Here's the interface of Kali Fast Ethernet 1/3.

22
00:01:20,960 --> 00:01:23,150
It's supposed to be up as shown here.

23
00:01:23,510 --> 00:01:29,500
However, if you've stopped the switch and started it again, your interface is probably down for now.

24
00:01:29,510 --> 00:01:36,680
As you can see here, my fast Ethernet 1/4 interface is up, which is supposed to be down because nothing

25
00:01:36,680 --> 00:01:37,890
is connected to it.

26
00:01:37,910 --> 00:01:42,350
So I added another VM and removed it while I wasn't recording.

27
00:01:42,620 --> 00:01:44,220
That's why it looks like this.

28
00:01:44,240 --> 00:01:47,480
So let's restart the switch.

29
00:01:48,080 --> 00:01:55,550
What's expected at the end is your Kali port will be up and my F14 port will be down.

30
00:01:56,360 --> 00:02:05,120
So right click on Switch, select, stop and right click again and select Start Switch is up.

31
00:02:05,360 --> 00:02:07,910
Let's look at the interfaces again.

32
00:02:08,090 --> 00:02:09,229
Open Console.

33
00:02:09,889 --> 00:02:11,720
The switch is initializing.

34
00:02:19,890 --> 00:02:21,900
Show IP Interface brief.

35
00:02:23,880 --> 00:02:26,460
And as you see fast Ethernet one three.

36
00:02:26,490 --> 00:02:29,730
The interface of my Kali is up as expected.

37
00:02:29,970 --> 00:02:37,740
F14 was up before the restart and it's down now and that's the expected result to.

38
00:02:38,530 --> 00:02:42,850
So I suppose your Carly port was down before the restart and it's up now.

39
00:02:42,850 --> 00:02:46,090
If not, just go back and do the steps again.

40
00:02:47,090 --> 00:02:50,870
So now let's go to Cali and configure it.

41
00:02:51,080 --> 00:02:57,680
Since we don't have a Dhcp in our network, we have to assign the IP addresses for the nodes of the

42
00:02:57,680 --> 00:02:59,030
network manually.

43
00:02:59,420 --> 00:03:05,690
So right click on Cali and select start and Cali is started and it's initializing.

44
00:03:09,480 --> 00:03:11,340
Log in with root user.

45
00:03:11,340 --> 00:03:16,170
My password is still t or okay.

46
00:03:16,200 --> 00:03:20,070
First, I want to check the network interface inside Kali.

47
00:03:20,840 --> 00:03:26,620
On the upper right corner, right click to the network icon and eith zero is selected.

48
00:03:26,630 --> 00:03:28,130
That's exactly what I want.

49
00:03:29,070 --> 00:03:30,570
Now to double check.

50
00:03:30,660 --> 00:03:33,660
I'll go to the network interface from VMware menu.

51
00:03:33,660 --> 00:03:37,740
And yep, there it is in custom mode, just as I wanted.

52
00:03:39,420 --> 00:03:46,780
Now, as I mentioned before, we have to assign the IP address, subnet mask, gateway, etcetera manually.

53
00:03:46,800 --> 00:03:53,790
So open a terminal and we'll use ifconfig to configure eth0.

54
00:03:54,920 --> 00:03:55,340
All right.

55
00:03:55,340 --> 00:04:03,620
So if config the interface either zero the IP address for Carly, I'll choose 192.168.10.3.

56
00:04:04,270 --> 00:04:05,470
Subnet mask.

57
00:04:05,470 --> 00:04:11,650
255.255.255.0 and hit Enter now to check the network.

58
00:04:11,650 --> 00:04:13,500
Let's ping the router first.

59
00:04:13,510 --> 00:04:19,329
It was 192.168.10.1 and yep, there it is.

60
00:04:19,329 --> 00:04:22,270
We got the reply packets and that's a good thing.

61
00:04:23,410 --> 00:04:27,730
Now you can use control C to quit the ping command.

62
00:04:28,470 --> 00:04:31,320
So let's ping another device in the same network.

63
00:04:31,350 --> 00:04:35,850
The VPC, its IP was 10.2.

64
00:04:35,880 --> 00:04:36,930
Excellent.

65
00:04:37,170 --> 00:04:37,950
Right.

66
00:04:38,870 --> 00:04:44,750
So now just to triple check, let me go to the VPC and ping Cali from there.

67
00:04:48,670 --> 00:04:50,770
The IP of Kali is 10.3.

68
00:04:50,800 --> 00:04:51,400
Perfect.

69
00:04:51,400 --> 00:04:53,890
And we've got the reply packets to prove it.

70
00:04:54,550 --> 00:04:56,890
Let's go for a quadruple check.

71
00:04:56,920 --> 00:04:59,590
Okay, so I'll go to the Router's console and ping Kali.

72
00:05:04,140 --> 00:05:06,090
The success rate is 100%.

73
00:05:06,090 --> 00:05:12,450
So as you see, the ping result is given in a different format and the router and then the result is

74
00:05:12,450 --> 00:05:14,700
again, just as we expected.

