1
00:00:01,160 --> 00:00:03,590
Hello, everyone, and welcome to this video.

2
00:00:04,530 --> 00:00:12,010
So in this video, we are going to see the steps and approach towards identification of SRF based on

3
00:00:12,030 --> 00:00:12,670
the abilities.

4
00:00:13,560 --> 00:00:21,410
So the first step is that we will exploit a Web application to induce the request to the attackers controlled

5
00:00:21,420 --> 00:00:21,960
server.

6
00:00:22,530 --> 00:00:23,040
All right.

7
00:00:24,260 --> 00:00:27,680
This is what we have understood into the principal as well.

8
00:00:28,800 --> 00:00:36,270
Moving ahead to the next step, we are going to configure the collaborator as a third party surfer in

9
00:00:36,270 --> 00:00:42,370
case you have any of your VPs or any of your website, you can use that as well.

10
00:00:43,020 --> 00:00:49,770
I assume that many of you would have your own Web application or your own VPs, which can be used as

11
00:00:49,770 --> 00:00:52,750
a third party server in case you do not have it.

12
00:00:52,890 --> 00:00:53,710
No need to worry.

13
00:00:54,120 --> 00:00:57,030
We are going to use the collaborative.

14
00:00:58,570 --> 00:01:04,840
In case you also do not have collaborated, then I'm going to tell you a very, very simple trick and

15
00:01:04,840 --> 00:01:10,630
a very good resource that you can utilize as your third party attacker controlled server.

16
00:01:11,850 --> 00:01:19,020
So the third step is wait for the interaction from the target of application to identify if it is vulnerable

17
00:01:19,020 --> 00:01:19,580
or not.

18
00:01:20,520 --> 00:01:28,200
Once have identified it to be vulnerable as we get a successful interaction, then we will do the attack

19
00:01:28,230 --> 00:01:32,020
on that Web application and complete the successful attack.

20
00:01:33,120 --> 00:01:41,590
So let's quickly jump on to the practical aim to successfully do a SRF attack on a target application.

21
00:01:42,270 --> 00:01:51,510
So for this example, we are going to take a test, BHP in Web.com as our target application to identify

22
00:01:51,550 --> 00:01:54,080
SRF based vulnerabilities.

23
00:01:55,080 --> 00:02:00,000
So the first thing that I'm going to do is I need an injection point to identify.

24
00:02:00,420 --> 00:02:04,200
For that, I'm going to use Bob's in the Bob suit.

25
00:02:04,200 --> 00:02:12,120
First, I'm going to spider the application to identify entry points and increase the scope of my target

26
00:02:12,120 --> 00:02:20,100
of application as I'm running on Version 2.0 in which the spider has changed its name.

27
00:02:20,550 --> 00:02:28,070
So I'm going to show you what is the change name of Bob Spider into the version 2.0 X.

28
00:02:28,830 --> 00:02:33,590
So let's quickly go back to the application loaded so we get a request over here.

29
00:02:35,130 --> 00:02:37,200
Now, I'm just going to right click first.

30
00:02:37,200 --> 00:02:39,390
Send this to repeated again.

31
00:02:39,390 --> 00:02:45,510
I'm going to right click and I'm going to click on Engagement Tools and I'm going to click on Discover

32
00:02:45,510 --> 00:02:46,110
Content.

33
00:02:46,960 --> 00:02:57,270
Remember, Bob Spider has changed its name to content, discovery or discover content in all the versions

34
00:02:57,270 --> 00:03:00,170
of Bob Suit with starts from 2.0.

35
00:03:00,930 --> 00:03:07,350
So we just need to click on Section is not running and it will start your session and it will start

36
00:03:07,350 --> 00:03:15,030
identifying or scrolling the target application for a lot of you are and parameters.

37
00:03:15,030 --> 00:03:21,990
As you can see over here, you can simply go to site map and also see the target audience that are loading

38
00:03:22,170 --> 00:03:27,570
here now as we want a few of the audience which contains the parameters.

39
00:03:27,600 --> 00:03:33,180
So I'm just going to double click on patterns and you can see we have successfully got all the parameters

40
00:03:33,180 --> 00:03:33,720
over here.

41
00:03:35,130 --> 00:03:35,700
Perfect.

42
00:03:35,700 --> 00:03:38,510
So I'm going to pick one off the parameter from here.

43
00:03:38,820 --> 00:03:43,170
So let me just minimize this, because I do not want to stop spidering.

44
00:03:43,440 --> 00:03:51,240
I want a lot more request because, you know, the more you spider, the more assets or scope increased

45
00:03:51,240 --> 00:03:56,790
you get, which means that you are increasing your chances of getting a valid venerability.

46
00:03:57,690 --> 00:04:03,510
Now, for instance, for now, I'm going to close this because we have already identified a lot of you

47
00:04:03,510 --> 00:04:04,410
are right now.

48
00:04:04,410 --> 00:04:11,790
And I'm going to choose anyone from this into a real time scenario, onto a bug bounty program that

49
00:04:11,790 --> 00:04:17,630
in your hunting on a Web application, you can keep it running so you get more number of requests.

50
00:04:18,420 --> 00:04:20,310
Alright, so let me just exit this.

51
00:04:21,390 --> 00:04:28,920
Now you have to go to your target and from here let's pick any of the target.

52
00:04:28,920 --> 00:04:29,650
You are it.

53
00:04:29,730 --> 00:04:39,330
So let's say we are going to pick one of the URL, which is for example, let's pick a u r l which starts

54
00:04:39,330 --> 00:04:42,420
or it is file equals two.

55
00:04:43,080 --> 00:04:46,110
So let me see if I can see you are like this.

56
00:04:46,920 --> 00:04:47,790
Let me just right.

57
00:04:47,820 --> 00:04:50,250
Click over here and click on add to scope.

58
00:04:50,610 --> 00:04:55,830
I can filter this based on scope as well as I do not want to see any clutter over here.

59
00:04:56,460 --> 00:04:57,060
Again, again.

60
00:04:57,060 --> 00:04:57,630
Right click.

61
00:04:57,990 --> 00:05:06,390
I can go to engagement tools, I can again click on discover content and start and it will start identifying

62
00:05:06,390 --> 00:05:07,920
and crawling the target again.

63
00:05:08,260 --> 00:05:18,360
OK, now if I want to identify a specific set of parameters from the given discovered content, I can

64
00:05:18,360 --> 00:05:19,140
also do that.

65
00:05:19,620 --> 00:05:22,370
For that you just need to go to Bob and you to search.

66
00:05:23,010 --> 00:05:26,390
So now I'm going to search for something or less file.

67
00:05:27,120 --> 00:05:33,000
Now you can just take this option as well in which you have to choose in scope only, which will only

68
00:05:33,000 --> 00:05:38,040
search the parameter file into your in scope domains as well.

69
00:05:38,640 --> 00:05:45,000
So I'm just going to go and you can see I have got a lot of your URLs, which contains a file already.

70
00:05:45,000 --> 00:05:48,390
So I'm going to choose one of which is this.

71
00:05:48,900 --> 00:05:49,500
So let me just.

72
00:05:49,500 --> 00:05:49,680
Right.

73
00:05:49,680 --> 00:05:51,390
Click and send this to repeater.

74
00:05:51,720 --> 00:05:52,170
Perfect.

75
00:05:52,740 --> 00:05:54,630
Now we have one of the U.

76
00:05:54,630 --> 00:05:58,660
All which I'm going to try for a successful SRF.

77
00:05:58,680 --> 00:06:03,750
So let me first let go and see what is this which it contains.

78
00:06:04,470 --> 00:06:11,090
So I think it contains a picture, which is why not let us render and you can see it contains a picture.

79
00:06:11,810 --> 00:06:12,420
All right.

80
00:06:12,660 --> 00:06:19,890
So now we are going to test the parameter file equal to if it is vulnerable to SRF or not.

81
00:06:20,420 --> 00:06:25,790
So, as I already mentioned, that we are going to use Bob collaborator's, so you for that, you just

82
00:06:25,790 --> 00:06:30,410
simply need to click on Bob and you can choose the Bob collaborator client.

83
00:06:31,910 --> 00:06:39,650
Now, you can see over here, this is number to generate, which means how many collaborative payloads

84
00:06:39,650 --> 00:06:40,440
we want to generate.

85
00:06:40,460 --> 00:06:41,920
So I just want to generate one.

86
00:06:42,050 --> 00:06:50,420
You can also choose one and click on copy to ClipArt and it will copy the collaborator client payload,

87
00:06:50,420 --> 00:06:53,840
which is nothing but your third party source name.

88
00:06:54,730 --> 00:07:01,150
Or the address poll, every 60 seconds, you can choose or you can make it to one second, which means

89
00:07:01,150 --> 00:07:07,820
it is going to refresh and check if there are any interaction requests that have come or not.

90
00:07:08,200 --> 00:07:12,500
So let's click on Copy to Clipboard and go back over here.

91
00:07:13,150 --> 00:07:20,500
Now, let's just remove this and we start over here now as we want the request to be sent.

92
00:07:20,530 --> 00:07:28,390
So let me just add HDB in front of it to make the request go to our collaborative server, which is

93
00:07:28,390 --> 00:07:31,690
our third party server, and make the application.

94
00:07:31,930 --> 00:07:34,180
It is HDB based server.

95
00:07:37,160 --> 00:07:43,700
All right, so now let me just let go and let's see if we get something in the response and you can

96
00:07:43,700 --> 00:07:50,900
see I got a 200 and something in response, go back to your collaborator and see if we have got something.

97
00:07:51,500 --> 00:07:57,080
And you can see, yes, we have got a couple of requests over here to let let's see the request that

98
00:07:57,080 --> 00:07:58,540
we have received over here.

99
00:07:58,700 --> 00:08:01,820
And you can see this is the request which has been received.

100
00:08:02,090 --> 00:08:04,880
The collaborators are had received and HDB request.

101
00:08:05,450 --> 00:08:08,910
The request was received from the IP address, which is this IP address.

102
00:08:09,440 --> 00:08:13,030
Now, let's verify if this IP address belongs to whom.

103
00:08:13,790 --> 00:08:17,980
For that, let's go back to O'Haire based IP address over here.

104
00:08:18,410 --> 00:08:24,500
And you can see the IP address belongs to accountings, which is test BHB.

105
00:08:24,890 --> 00:08:25,360
Perfect.

106
00:08:25,700 --> 00:08:34,880
So we have identified a valid SRF over here as it is making interaction with attacker control third

107
00:08:34,880 --> 00:08:35,840
party domain.

108
00:08:36,470 --> 00:08:41,470
Let let me show you the collaborator client and let me see where is the collaborative client.

109
00:08:41,480 --> 00:08:44,100
It is over here now.

110
00:08:44,180 --> 00:08:46,750
This is the spider which is running.

111
00:08:46,760 --> 00:08:49,220
So the collaborator client should be.

112
00:08:53,010 --> 00:08:59,960
So I think so I'm just going to start a collaborator client again, I have closed the previous window.

113
00:09:00,300 --> 00:09:07,830
So now again, I'm going to make one over here because you want to pull it in once again or copy this

114
00:09:07,830 --> 00:09:11,290
over here, pasted over here and let's see if we get any traction.

115
00:09:11,630 --> 00:09:18,330
Now, remember, you need to add GDP and pasted over your head.

116
00:09:18,330 --> 00:09:20,430
Go wait for the interaction.

117
00:09:20,440 --> 00:09:22,470
Let's verify if we got the interaction over here.

118
00:09:22,650 --> 00:09:28,530
And again, see, we have got a successful interaction from the IP address, which is belonging to a

119
00:09:28,530 --> 00:09:29,070
target.

120
00:09:29,460 --> 00:09:30,780
As you can see over here.

121
00:09:31,650 --> 00:09:35,310
This is the response that we have got from our target.

122
00:09:35,850 --> 00:09:44,150
So this is how you test for SRF based one liabilities on onto any target of application.

123
00:09:45,540 --> 00:09:52,680
So we will end for this video into the next video I'm going to show you if you do not have Bupp collaborator.

124
00:09:53,070 --> 00:10:01,080
But is this option for a third party services or third party attacker control domain, how you can utilize

125
00:10:01,080 --> 00:10:03,630
any of the free and useful resource?

126
00:10:04,380 --> 00:10:05,630
So I hope you guys understood.

127
00:10:05,820 --> 00:10:06,330
Thank you.
