1 00:00:00,630 --> 00:00:04,590 So far we have seen how we can use a map in Kali. 2 00:00:04,620 --> 00:00:10,320 Now let's see the graphical version of NW map that is Xen map and let's see how we can use it in window 3 00:00:10,320 --> 00:00:10,800 ten. 4 00:00:11,130 --> 00:00:14,130 So go to Google and type download Zen map. 5 00:00:14,550 --> 00:00:19,620 Now let's open the first link and map dot org slash Zen map. 6 00:00:20,460 --> 00:00:28,010 Now it says you can download Zen map of impact with itself from the end map download page. 7 00:00:28,020 --> 00:00:28,890 So click here. 8 00:00:32,160 --> 00:00:38,700 And now let's download the latest version of a map that is 7.70. 9 00:00:39,060 --> 00:00:41,490 Simply click here and the downloading will start. 10 00:00:42,480 --> 00:00:44,550 Now let's see how we can install it. 11 00:00:47,460 --> 00:00:48,570 So let's open it. 12 00:00:51,450 --> 00:00:52,470 I agree. 13 00:00:55,060 --> 00:00:55,780 Next. 14 00:00:57,840 --> 00:00:58,440 Install. 15 00:01:00,790 --> 00:01:02,950 Now the Xen map is installing. 16 00:01:10,990 --> 00:01:11,380 Okay. 17 00:01:11,500 --> 00:01:12,340 I agree. 18 00:01:13,840 --> 00:01:17,470 Now it says automatically start the cab driver at boot time. 19 00:01:17,470 --> 00:01:19,630 Support low back traffic. 20 00:01:20,960 --> 00:01:27,250 Okay, let's select this one and now click install. 21 00:01:38,090 --> 00:01:39,490 It's showing an error. 22 00:01:39,500 --> 00:01:42,380 So let's install and pick it up as well. 23 00:01:49,380 --> 00:01:49,860 Okay. 24 00:01:50,160 --> 00:01:51,030 Download. 25 00:01:57,070 --> 00:01:59,190 So the map is installed successfully. 26 00:01:59,200 --> 00:02:00,430 Now let's open it. 27 00:02:03,380 --> 00:02:03,680 Okay. 28 00:02:03,950 --> 00:02:12,650 Now, here in the target field, we have to enter the target IP, IP off our target machine. 29 00:02:12,830 --> 00:02:16,940 So this is the IP of Windows ten host machine. 30 00:02:17,510 --> 00:02:24,260 And let's do a there are different types of scan, so let's start with the regular scan. 31 00:02:25,760 --> 00:02:31,280 Now, if we are using CLI, then we have to use this command to perform the regular scan. 32 00:02:32,750 --> 00:02:34,220 Let's click on scan. 33 00:02:34,700 --> 00:02:42,620 And now a map has started its process and here are various different tabs like for ports or host for 34 00:02:42,620 --> 00:02:45,740 topology for whole details and scans, etc.. 35 00:02:46,450 --> 00:02:46,760 Okay. 36 00:02:46,760 --> 00:02:49,580 So first, let's wait for the output. 37 00:02:51,800 --> 00:02:57,580 See, these are the port numbers which are using TCP. 38 00:02:58,250 --> 00:03:00,590 Let's filter this result. 39 00:03:00,620 --> 00:03:01,510 Go to ports. 40 00:03:01,520 --> 00:03:04,460 See, the first one is the port number. 41 00:03:04,490 --> 00:03:06,110 The second one is the protocol. 42 00:03:06,110 --> 00:03:07,970 That is transmission control protocol. 43 00:03:08,000 --> 00:03:11,310 Then there is a state whether the port is open or not. 44 00:03:11,330 --> 00:03:12,950 Then there is a service name. 45 00:03:12,950 --> 00:03:17,840 So for example, HTTPS service is using port number four, four, three. 46 00:03:18,890 --> 00:03:20,660 Now let's switch to the topology. 47 00:03:21,620 --> 00:03:23,870 So it's showing the correct topology. 48 00:03:24,650 --> 00:03:27,680 Now let's go to host details. 49 00:03:28,130 --> 00:03:29,960 It says the host is running. 50 00:03:30,200 --> 00:03:32,810 Total number of open ports are six. 51 00:03:32,810 --> 00:03:36,200 Total scan ports are 1000 OC. 52 00:03:36,590 --> 00:03:40,400 Now this is the IP address and this is the name of the machine. 53 00:03:41,690 --> 00:03:45,020 Target machine right now, scans. 54 00:03:46,670 --> 00:03:49,340 So we have used this command to perform a scan. 55 00:03:49,580 --> 00:03:53,420 Right now, let's try one more different kind of scan. 56 00:03:53,450 --> 00:03:57,200 Let's say intense scan plus UDP OC. 57 00:03:57,740 --> 00:03:59,030 Let's scan this one. 58 00:04:05,190 --> 00:04:05,450 Okay. 59 00:04:05,490 --> 00:04:12,660 So it says 148 scripts for scanning for this particular command. 60 00:04:13,080 --> 00:04:19,440 Now, if we are using this PN map in Curly, then we have to type this command to perform intensive 61 00:04:19,440 --> 00:04:21,000 scan plus UDP. 62 00:04:22,920 --> 00:04:24,960 Now let's see the results. 63 00:04:26,760 --> 00:04:28,620 Now it's still scanning. 64 00:04:28,980 --> 00:04:31,560 Now it says UDP scanning initialization. 65 00:04:31,970 --> 00:04:32,280 Okay. 66 00:04:32,280 --> 00:04:33,900 So it's scanning for UDP. 67 00:04:34,800 --> 00:04:38,970 Again, by default and scans 4000 votes. 68 00:04:41,400 --> 00:04:46,350 So here is the same result that we have got earlier. 69 00:04:47,460 --> 00:04:50,520 It says complete UDP scan. 70 00:04:52,860 --> 00:04:53,400 Right. 71 00:04:53,400 --> 00:04:57,330 So this is how the Xen map actually works. 72 00:04:57,600 --> 00:04:58,200 Right.