1
00:00:00,750 --> 00:00:07,460
So guys, we have seen in the previous video that how we can perform operating system fingerprinting.

2
00:00:07,470 --> 00:00:11,520
Now in this video we will talk about network mapping.

3
00:00:12,060 --> 00:00:13,860
So what is network mapping?

4
00:00:13,890 --> 00:00:22,920
Well, mapping is basically means that how we can detect the exact topology in our target network,

5
00:00:24,510 --> 00:00:28,690
how are our resources placed in our target network?

6
00:00:28,710 --> 00:00:35,340
So for this practical, I have turned off all of my virtual machines and I am using my main machine,

7
00:00:35,340 --> 00:00:37,650
my physical machine for this practical.

8
00:00:37,650 --> 00:00:41,190
And I have connected this to my mobile hotspot.

9
00:00:41,280 --> 00:00:41,850
Right.

10
00:00:41,850 --> 00:00:48,660
I am doing this just to confirm whether a map detects the exact topology or not.

11
00:00:48,830 --> 00:00:51,210
Okay, so let's open the Xen map.

12
00:00:52,930 --> 00:00:55,870
Now let's type the command here.

13
00:00:56,320 --> 00:01:03,520
So n map hyphen s n for network mapping and then the network address.

14
00:01:05,860 --> 00:01:08,860
Remember not to type here a particular IP.

15
00:01:08,890 --> 00:01:11,500
Instead give a network address.

16
00:01:12,820 --> 00:01:14,140
So slash 24.

17
00:01:14,170 --> 00:01:14,830
Right.

18
00:01:15,430 --> 00:01:23,020
Now let's perform the scan and let's see whether a map is able to detect the topology or not.

19
00:01:29,840 --> 00:01:35,390
See, the purpose of this lesson is basically a network mapping, right?

20
00:01:35,390 --> 00:01:40,970
So it says, see, this is the Mac address of my mobile phone, right?

21
00:01:42,110 --> 00:01:47,570
And this is my main machine and this is its IP.

22
00:01:47,750 --> 00:01:54,350
So it says total 256 IP addresses is scanned in 15 seconds and to holster up.

23
00:01:54,350 --> 00:01:54,830
Right.

24
00:01:54,830 --> 00:02:05,330
So let's switch to topology and see guys see it's it has detected the exact topology which I have used.

25
00:02:05,330 --> 00:02:06,020
Right.

26
00:02:06,110 --> 00:02:12,620
I have connected my main machine with my hotspot using wireless adapter.

27
00:02:12,620 --> 00:02:13,340
Right.

28
00:02:14,750 --> 00:02:16,880
So yes, it works.

29
00:02:17,540 --> 00:02:22,940
So it is able to detect the exact topology used in our target network.

30
00:02:23,570 --> 00:02:32,030
And it is important because by using this we have an idea of how our resources are placed in our target

31
00:02:32,030 --> 00:02:32,750
network.