1
00:00:00,900 --> 00:00:07,650
In the previous video we have seen how we can perform ARP spoofing and now in this video we will going

2
00:00:07,650 --> 00:00:10,770
to see how we can perform ERP poisoning.

3
00:00:11,280 --> 00:00:20,430
So let's head up to applications and go to sniffing and spoofing and open this tool called as it graphical.

4
00:00:20,640 --> 00:00:24,570
So we are using this tool in order to perform ERP poisoning.

5
00:00:25,800 --> 00:00:27,540
Now let's go to sniff.

6
00:00:27,960 --> 00:00:32,190
Unified sniffing it is zero is our interface.

7
00:00:32,190 --> 00:00:32,660
So hit.

8
00:00:32,700 --> 00:00:33,240
Okay.

9
00:00:34,350 --> 00:00:38,340
Now let's move to Target's current target.

10
00:00:39,450 --> 00:00:40,920
Now in Target one.

11
00:00:41,370 --> 00:00:44,270
So Target one is our router.

12
00:00:44,280 --> 00:00:46,950
So ten .0.2.1.

13
00:00:48,090 --> 00:00:51,360
Let's add target two, which is window ten.

14
00:00:51,600 --> 00:00:54,090
So ten .0.2.7.

15
00:00:54,870 --> 00:01:01,860
Okay, now let's move to MDM and start ERP poisoning.

16
00:01:01,860 --> 00:01:02,550
Right.

17
00:01:06,860 --> 00:01:07,430
Then.

18
00:01:09,770 --> 00:01:16,460
So this is how we can use ether cap in order to perform ERCP poisoning attack.

19
00:01:16,760 --> 00:01:17,360
Right.

20
00:01:17,450 --> 00:01:24,710
But here in the list below you will see IRB poisoning victims are blank, so no worries.

21
00:01:24,740 --> 00:01:30,260
Go to host and select scan for host.

22
00:01:31,100 --> 00:01:32,420
So see below.

23
00:01:32,720 --> 00:01:40,430
It says it's scanning for merge target to host found so it automatically adds the two victims on its

24
00:01:40,430 --> 00:01:41,090
own.

25
00:01:41,480 --> 00:01:42,020
Right.

26
00:01:43,190 --> 00:01:47,120
Now let's go to middle ERP poisoning again.

27
00:01:47,120 --> 00:01:47,930
Select and hit.

28
00:01:47,930 --> 00:01:49,880
Okay, done.

29
00:01:50,990 --> 00:01:53,780
Now let's go to terminal.

30
00:01:56,700 --> 00:02:14,550
And perform dcp dum again hyphen i80 then hyphen n then our port which is 830 and then define host so

31
00:02:14,550 --> 00:02:16,620
host what we are window ten.

32
00:02:19,660 --> 00:02:20,240
Done.

33
00:02:20,830 --> 00:02:28,860
So now you know how to perform ERP spoofing and ERP poisoning right now in order to get your traffics

34
00:02:28,870 --> 00:02:29,440
again.

35
00:02:29,590 --> 00:02:32,680
Just simply start Wireshark and start monitoring.

36
00:02:33,430 --> 00:02:34,150
That's it.