1
00:00:00,440 --> 00:00:02,300
And map, no port scan.

2
00:00:04,270 --> 00:00:11,320
Of course, and MAP is a program that's used to perform active scans and the discovery of the results

3
00:00:11,320 --> 00:00:15,610
will help you set your goals for what your pen test will be.

4
00:00:16,090 --> 00:00:22,660
It's going to be unnecessary to scan all the boards for each type, especially when scanning large networks.

5
00:00:23,300 --> 00:00:29,950
So instead, wouldn't it be quick and logical to detect open computers as a first step and then only

6
00:00:29,950 --> 00:00:32,260
scan reports on those computers?

7
00:00:33,400 --> 00:00:34,630
Yeah, so let's do this then.

8
00:00:35,410 --> 00:00:41,880
And MAP can perform a ping scan just to detect the computers that are turned on.

9
00:00:43,210 --> 00:00:48,220
So scanning with s.m consists of an ICMP echo request.

10
00:00:48,850 --> 00:00:58,330
DCPI send to Port four for three, DCPI back to Port 80 and an ICMP time stamp request by default,

11
00:01:00,220 --> 00:01:07,570
only send packets are sent to ports 80 and four 443 three on the destination by a non privileged user.

12
00:01:08,930 --> 00:01:15,230
So let's let me show you an example, so let's make an active discovery on the network where the virtual

13
00:01:15,230 --> 00:01:17,660
computers are that we have established.

14
00:01:19,210 --> 00:01:23,350
So for this, let's open all of the virtual computers that we have install.

15
00:01:24,840 --> 00:01:32,310
Open virtual box open, carry Linux 10 zero dot two one five open Matus employable.

16
00:01:33,550 --> 00:01:43,840
Then that zeroed out two, not four, open wound to 10, zero to that seven when Windows seven and zero,

17
00:01:43,850 --> 00:01:44,830
that dude at six.

18
00:01:45,780 --> 00:01:47,850
Now, organically, Linux, VM.

19
00:01:48,790 --> 00:01:51,910
Username root password tour.

20
00:01:52,950 --> 00:01:55,470
Open up terminal and right this command.

21
00:01:56,560 --> 00:02:03,080
And map, as in 10 zero two zero two four.

22
00:02:03,290 --> 00:02:04,270
And press enter.

23
00:02:05,600 --> 00:02:07,400
OK, so here are the scan results.

24
00:02:08,620 --> 00:02:10,870
And we can see the computers that are open here.