1
00:00:00,280 --> 00:00:01,050
Example one.

2
00:00:02,760 --> 00:00:05,880
So let's do a script scan related to HTP.

3
00:00:07,030 --> 00:00:13,450
First, we'll do a Port 80 scan on the current network, so we'll turn on virtual machines that we have

4
00:00:13,450 --> 00:00:17,140
installed open virtual box open carry Linux.

5
00:00:18,160 --> 00:00:26,020
Then that out to about one five open Métis voidable, 10 zero do not for open wound to ten dot zero

6
00:00:26,020 --> 00:00:34,390
dot 237 open windows seven 10 down zero two dot six and log in to County Linux VM.

7
00:00:35,450 --> 00:00:40,790
Username root, password tours, open terminal and write this common.

8
00:00:43,250 --> 00:00:49,640
And map ten to zero, dot 2.0, slash 24 p. 80 press enter.

9
00:00:51,170 --> 00:00:53,420
OK, so here are the scan results.

10
00:00:55,090 --> 00:01:00,190
And one of the machines that we found is Métis Voidable and 012 that four.

11
00:01:00,910 --> 00:01:02,950
So let's check out what scripts we have.

12
00:01:04,430 --> 00:01:05,840
So go to the command line.

13
00:01:06,880 --> 00:01:13,330
Locate asterisk and see pipe grep HTP.

14
00:01:14,430 --> 00:01:15,830
And let's look at the results.

15
00:01:17,630 --> 00:01:24,260
So we can scan all of these scripts by using them or you can use them one by one.

16
00:01:25,800 --> 00:01:29,940
So in this example, let's run and HDB Bruskin.

17
00:01:30,970 --> 00:01:33,220
On the command line enter.

18
00:01:35,310 --> 00:01:40,980
Ten, not zero, two, not four script HTP, Bruta and Prusiner.

19
00:01:42,600 --> 00:01:50,970
So if we want to look at what is in the script, we can write leaf pad user share and map scripts HDB

20
00:01:50,970 --> 00:01:52,350
Butat and see.

21
00:01:53,720 --> 00:01:58,900
Then when we open the script file, we can see all of the commands used and the explanations put in

22
00:01:58,900 --> 00:02:00,430
by the person who wrote the script.

23
00:02:03,460 --> 00:02:12,340
And if you want to get just about half, then just type in map, script, script, help HDTV, bruta

24
00:02:12,340 --> 00:02:13,510
NSC and press enter.

25
00:02:14,560 --> 00:02:19,090
So here you can review it by clicking on the link on the Internet, Aniceto.

26
00:02:20,840 --> 00:02:23,720
They scan results will be listed as follows.

27
00:02:26,160 --> 00:02:30,530
Now, if we want to crawl all using all the scripts related to HDP.

28
00:02:32,560 --> 00:02:41,380
Go to the command line and map 10 zero and got to not four script HTP Asterisk Press enter.

29
00:02:43,500 --> 00:02:49,920
But I'll be honest with you, this command can take a long time to run because Unmap will try all of

30
00:02:49,920 --> 00:02:53,070
the HGP scripts in sequence.