1
00:00:00,630 --> 00:00:04,110
OK, so now let's go one step further and add our colleague to the network.

2
00:00:04,110 --> 00:00:05,010
Are you ready for this?

3
00:00:07,050 --> 00:00:14,000
First of all, let me change the labels from the IP block to the IP address and this one as well.

4
00:00:15,250 --> 00:00:17,050
And create the labels for villans.

5
00:00:19,830 --> 00:00:23,490
From the Jena three main menu, select preferences.

6
00:00:24,700 --> 00:00:31,930
In the tree, the left hand side, you see that there is a VM where VMS, it's a menu item under the

7
00:00:31,930 --> 00:00:32,920
VMware menu.

8
00:00:34,330 --> 00:00:34,870
You got it.

9
00:00:35,150 --> 00:00:35,980
OK, you selected.

10
00:00:37,510 --> 00:00:44,650
Now, here are a few VM templates that I've added before, you are supposed to have nothing here at

11
00:00:44,650 --> 00:00:48,120
the moment unless you added something before as well.

12
00:00:49,230 --> 00:00:57,390
So in any event, Kallick new and a new VMware pvm template window appears and the VMware virtual machines

13
00:00:57,390 --> 00:00:59,520
are already listed in the combo box.

14
00:01:00,620 --> 00:01:10,190
So select Calli Linux 2018 do not select use as a linked base VM because it's experimental at the moment

15
00:01:10,190 --> 00:01:13,670
and it could have some bugs that could just throw you off.

16
00:01:13,680 --> 00:01:17,420
So right here, let's just click finish.

17
00:01:18,440 --> 00:01:18,800
All right.

18
00:01:19,160 --> 00:01:25,820
Now we have a template and gennies three, you can edit it here or delete it, just like the router

19
00:01:25,820 --> 00:01:26,690
that we added before.

20
00:01:27,700 --> 00:01:35,740
OK, so its name is too long, so let's click at it, change the name and click OK and OK again.

21
00:01:37,110 --> 00:01:39,520
Now we're ready to add it to our network.

22
00:01:40,080 --> 00:01:47,100
So from the Devices toolbar, if you expand the end devices, that's where you see Kelly.

23
00:01:48,000 --> 00:01:50,250
So drag and drop it into the workspace.

24
00:01:51,730 --> 00:01:58,600
And a label showing its IP address, I'll make its IP turned up three and.

25
00:01:59,580 --> 00:02:01,140
It'll be in VLAN 10.

26
00:02:03,840 --> 00:02:08,520
So click the last item in the devices toolbar to connect Kali to the switch.

27
00:02:09,560 --> 00:02:15,140
Click the switch, select the interface, and I'll select fast Ethernet one six three.

28
00:02:16,500 --> 00:02:17,400
And click, Kylie.

29
00:02:18,250 --> 00:02:20,590
Select the only option, Ethernet zero.

30
00:02:21,260 --> 00:02:25,290
Oh, we got a problem, but no worries, we're troubleshooters.

31
00:02:25,310 --> 00:02:28,600
You're right, it's not an unexpected situation.

32
00:02:29,620 --> 00:02:31,870
An error message appears at the top right corner.

33
00:02:31,870 --> 00:02:38,140
It says we have to stop the VM and allow Jeunesse three to change the attachment type.

34
00:02:38,920 --> 00:02:42,640
You can see the same message in the Jannis three console at the bottom.

35
00:02:43,920 --> 00:02:46,440
Go to college here and shut it down.

36
00:02:48,600 --> 00:02:53,790
And from the virtual machine menu items select shut down, it's going to take about two minutes.

37
00:02:55,140 --> 00:02:56,820
But while Collie is shutting down.

38
00:02:56,850 --> 00:03:01,580
Let's go to Jeunesse three and allow it to change the VMS attachment type.

39
00:03:02,340 --> 00:03:09,930
So from Ginés three, the main menu, select preferences, select VMware VMS at the left hand side tree

40
00:03:09,930 --> 00:03:12,330
and click collee and then click edit.

41
00:03:13,530 --> 00:03:21,930
Now you can select a network tab and here there's a checkbox to allow Ginés three to override VMware

42
00:03:21,930 --> 00:03:27,330
adapter, so check it and click OK and then OK again.

43
00:03:29,350 --> 00:03:33,520
And we're still waiting for college to be shut down.

44
00:03:35,600 --> 00:03:38,500
OK, so let's try to connect Kali to the switch again.

45
00:03:42,030 --> 00:03:48,690
But we have another error message, it says Nat is already configured on the network adapter.

46
00:03:49,640 --> 00:03:53,750
So let's allow Carly one to use any adapter.

47
00:03:54,640 --> 00:03:57,190
OK, so I think I know the problem do.

48
00:03:58,120 --> 00:03:58,770
We'll find out.

49
00:03:59,990 --> 00:04:07,580
So we have to remove Colly from the workspace, because this one has been added before we allow DNS

50
00:04:07,580 --> 00:04:10,220
three to configure VMware as network interface.

51
00:04:11,330 --> 00:04:14,270
So now I'll add color again by drag and drop.

52
00:04:16,140 --> 00:04:17,640
Now connected the switch.

53
00:04:20,730 --> 00:04:27,690
OK, but before starting college, let me clear the Jeunesse three cons. Now let's start Colly again.

54
00:04:28,020 --> 00:04:32,700
But another error message, OK, no worries.

55
00:04:33,210 --> 00:04:35,730
I already knew all of these messages beforehand.

56
00:04:35,730 --> 00:04:41,700
I just want to show you what happens when the Jeunesse three needs to add Carly to it.

57
00:04:42,950 --> 00:04:49,820
So this message means that we need to have a custom network interface created in VMware and available

58
00:04:49,820 --> 00:04:51,620
to be used by DNS three.

59
00:04:52,950 --> 00:05:00,870
So now from VMware Fusion, I'll start a virtual machine library from the main menu, select preferences.

60
00:05:01,990 --> 00:05:07,480
If you're using VMware workstation or player, just go to the preferences there.

61
00:05:08,850 --> 00:05:10,230
Now Click Network.

62
00:05:11,290 --> 00:05:19,270
As you see, I have no custom interface at the moment to be able to make changes, I click on the padlock

63
00:05:19,270 --> 00:05:25,230
icon, enter the password of my user, and now I can add a custom interface.

64
00:05:25,690 --> 00:05:31,150
So click the plus icon here and VM net three is added.

65
00:05:32,150 --> 00:05:38,960
And leave everything with the default values because Janez three will configured for us, so click apply

66
00:05:39,650 --> 00:05:41,030
and now we can close these windows.

67
00:05:42,840 --> 00:05:47,580
So now let's go back to college and start from the GNC three again.

68
00:05:48,720 --> 00:05:50,550
And sure enough, it starts.

69
00:05:56,760 --> 00:05:58,200
So log in is route user.

70
00:06:00,420 --> 00:06:03,600
And finally, we're on the COLLY desktop.

71
00:06:05,070 --> 00:06:08,340
Now, let's look at the network settings of Colly.

72
00:06:09,300 --> 00:06:14,130
This icon is a network interface, when you click it, you'll see the interface options.

73
00:06:14,760 --> 00:06:18,570
As you see, the current interface is custom VM net three.

74
00:06:19,610 --> 00:06:25,830
Alternatively, we can look at the network setting from the French icon, which brings us to a general

75
00:06:25,830 --> 00:06:26,810
settings panel.

76
00:06:26,820 --> 00:06:30,480
And then we can select a network adapter from here.
