1 00:00:00,730 --> 00:00:08,020 Great, so we attach Carly to our network physically now we have to make the configurations to make 2 00:00:08,020 --> 00:00:10,420 Carly a part of Valentin. 3 00:00:13,200 --> 00:00:20,070 So as you can see here, my colleague is not running at the moment, I'll go to switches console to 4 00:00:20,070 --> 00:00:21,330 configure the connection. 5 00:00:22,570 --> 00:00:25,540 It'll be similar to configurations of the VPC. 6 00:00:26,760 --> 00:00:28,920 Type can't tea. 7 00:00:30,220 --> 00:00:32,140 To enter the configured terminal mode. 8 00:00:33,310 --> 00:00:41,860 And then into F1 three to configure the interface fast Ethernet one, slash three, which is used for 9 00:00:41,860 --> 00:00:42,220 Colly. 10 00:00:43,670 --> 00:00:48,800 We have seen these before, so I'll just go through it quickly, switch mode access. 11 00:00:51,080 --> 00:00:53,150 Switchboard Access Vilan 10. 12 00:00:55,120 --> 00:00:56,830 No shutdown exit. 13 00:00:57,770 --> 00:01:05,750 Exit again, go to the root, and you are to write the configuration to make it persistent, OK, to 14 00:01:05,750 --> 00:01:11,990 check the current situation of the interfaces we can now use, show IP interface brief. 15 00:01:17,190 --> 00:01:22,920 Here's the interface of Colly fast Ethernet one six three, it's supposed to be up is shown here. 16 00:01:23,760 --> 00:01:29,400 However, if you stopped the switch and started again, your interface is probably down for now. 17 00:01:29,700 --> 00:01:36,360 As you can see here, my fast either net one for interfaces up, which is supposed to be down because 18 00:01:36,360 --> 00:01:37,620 nothing is connected to it. 19 00:01:38,250 --> 00:01:42,120 So I added another VM and removed it while I wasn't recording. 20 00:01:42,930 --> 00:01:44,050 That's why it looks like this. 21 00:01:44,490 --> 00:01:47,310 So let's restart this switch. 22 00:01:48,390 --> 00:01:55,440 What's expected at the end is your colleague Port will be up and my F one for port will be down. 23 00:01:56,570 --> 00:02:02,900 So I click on SWICH Select, Stop and right click again and select start. 24 00:02:04,350 --> 00:02:11,550 Which is up, let's look at the interfaces again, open console, the switches initializing. 25 00:02:20,100 --> 00:02:21,780 Showup, interface, brief. 26 00:02:23,950 --> 00:02:31,780 And as you see faster Ethernet 1-3, the interface of my colleague is of his expected EF one slash four 27 00:02:31,780 --> 00:02:34,800 was up before the restart and it's down now. 28 00:02:34,900 --> 00:02:37,570 And that's the expected result to. 29 00:02:38,740 --> 00:02:44,590 So I suppose your colleague Port was down before the restart and it's up now, if not, just go back 30 00:02:44,590 --> 00:02:45,970 and do the steps again. 31 00:02:47,390 --> 00:02:54,680 So now let's go to college and configure it, since we don't have a DHP in our network, we have to 32 00:02:54,680 --> 00:02:58,820 assign the IP addresses for the node of the network manually. 33 00:02:59,760 --> 00:03:05,520 So I click on Collee and select start and Collie's started and it's initializing. 34 00:03:09,510 --> 00:03:13,860 Log in with user, my password is still tío or. 35 00:03:15,770 --> 00:03:19,940 OK, first, I want to check the network interface inside Colly. 36 00:03:20,910 --> 00:03:26,580 On the upper right corner, right, click to the network icon and Ethe Zero is selected. 37 00:03:26,790 --> 00:03:28,020 That's exactly what I want. 38 00:03:29,150 --> 00:03:36,140 Now, the double check, I'll go to the network interface from VMware menu and yep, there it is in 39 00:03:36,140 --> 00:03:37,610 custom mode, just as I wanted. 40 00:03:39,590 --> 00:03:45,980 Now, as I mentioned before, we have to assign the IP address, subnet mask, Gateway, et cetera, 41 00:03:45,980 --> 00:03:46,610 manually. 42 00:03:47,120 --> 00:03:53,630 So, OK, that terminal and we'll use if config to configure is zero. 43 00:03:54,930 --> 00:04:01,020 All right, so if config the interface either zero, the IP address for Colly, I'll choose one nine 44 00:04:01,020 --> 00:04:03,480 two two one six eight eight one zero three. 45 00:04:04,450 --> 00:04:12,790 Subnet mask 255, dot 255, got 255 zero and hit enter now to check the network, let's ping the router 46 00:04:12,790 --> 00:04:13,390 first. 47 00:04:13,750 --> 00:04:17,080 It was one nine two dot one six eight nine one zero one. 48 00:04:17,440 --> 00:04:19,420 And yep, there it is. 49 00:04:19,420 --> 00:04:22,120 We got the reply packets and that's a good thing. 50 00:04:23,620 --> 00:04:27,550 Now you can use control C to quit the Pinkman. 51 00:04:28,650 --> 00:04:37,830 So let's ping another device in the same network, the VPC, its IP was and to excellent, right. 52 00:04:39,110 --> 00:04:44,540 So now just a triple check, let me go to the VPC and Ping Colly from their. 53 00:04:48,700 --> 00:04:53,680 The IP of Colly is ten point three perfect, and we've got the reply packets to prove it. 54 00:04:54,690 --> 00:04:56,730 Let's go for a quadruple check. 55 00:04:56,910 --> 00:04:59,490 OK, so I'll go to the Rooters Council and Pinkly. 56 00:05:04,370 --> 00:05:10,550 The success rate is 100 percent, so as you see, the ping result is given in a different format in 57 00:05:10,550 --> 00:05:14,510 the router, and then the result is, again, just as we expected.