1
00:00:00,650 --> 00:00:07,300
Now, similar to the other types of spoofing attacks, dynamic host configuration protocol, the UQP

2
00:00:07,460 --> 00:00:15,350
spoofing involves an attacker pretending to be someone else, in this case acting as a legitimate server.

3
00:00:16,290 --> 00:00:22,860
Since DHP is used on most networks to provide addressing and other common information and clients losing

4
00:00:22,860 --> 00:00:25,790
control of this part of the network can be dangerous.

5
00:00:28,380 --> 00:00:35,730
Dynamic host Configuration Protocol, DHP, now it's a protocol used to provide automatic and central

6
00:00:35,730 --> 00:00:39,040
management for the distribution of IP addresses within a network.

7
00:00:40,620 --> 00:00:47,640
It's also used to configure the proper subnet mask, default gateway and DNS server information on the

8
00:00:47,640 --> 00:00:48,180
device.

9
00:00:49,220 --> 00:00:57,770
And most homes and small businesses, the router acts as a DHP server in large networks, a single computer

10
00:00:57,800 --> 00:00:59,630
might act as a DHP server.

11
00:01:00,790 --> 00:01:07,990
In short, the process goes like this of device, the client requests an IP address from a router,

12
00:01:08,320 --> 00:01:08,860
the host.

13
00:01:09,710 --> 00:01:15,950
After which, the host assigns an available IP address to allow the client to communicate on the network.

14
00:01:17,240 --> 00:01:20,510
So let's look at some of the advantages of using DHP.

15
00:01:21,640 --> 00:01:28,630
A computer or any other device that connects to a network, local or Internet, must be properly configured

16
00:01:28,630 --> 00:01:30,120
to communicate on that network.

17
00:01:30,130 --> 00:01:34,960
Makes sense since DCPI allows that configuration to happen automatically.

18
00:01:35,390 --> 00:01:37,530
It's used in almost every device.

19
00:01:37,540 --> 00:01:41,500
It connects to a network, including computers, switches, smartphones, gaming consoles, you name

20
00:01:41,500 --> 00:01:41,590
it.

21
00:01:42,960 --> 00:01:45,600
Now, because of this dynamic IP address assignment.

22
00:01:46,600 --> 00:01:53,020
There's less of a chance that two devices will have the same IP address, which is very easy to run

23
00:01:53,020 --> 00:01:56,500
into when using manually assign static IP addresses.

24
00:01:58,400 --> 00:02:06,200
Using DHP also makes a network much easier to manage from an administrative point of view, every device

25
00:02:06,200 --> 00:02:11,600
on the network can get an IP address with nothing more than their default network settings, which is

26
00:02:11,600 --> 00:02:14,060
set up to obtain and address automatically.

27
00:02:14,060 --> 00:02:15,080
So that's easy.

28
00:02:15,080 --> 00:02:17,840
Gives them nothing to call the helpdesk about.

29
00:02:18,980 --> 00:02:24,800
The only other alternative is to manually assign addresses to each and every device on the network.

30
00:02:26,220 --> 00:02:27,810
You're not getting paid enough to do that.

31
00:02:29,600 --> 00:02:35,840
So because these devices can get an IP address automatically, they can move freely from one network

32
00:02:35,840 --> 00:02:43,010
to another, given that they're all set up with DCPI and receive an IP address automatically, which

33
00:02:43,010 --> 00:02:44,750
is super helpful with mobile devices.

34
00:02:45,990 --> 00:02:52,890
Now, as a cyber security expert, you should know one more thing about the DHP mechanism.

35
00:02:53,950 --> 00:03:00,490
The first device, which applies to a desktop discovery request, decides the configuration of the client.

36
00:03:01,910 --> 00:03:06,230
There is not any mechanism to authenticate the DHP server.

37
00:03:08,390 --> 00:03:18,290
Similarly, a server tries to reply to all the requests, and again, there is no authentication mechanism

38
00:03:18,290 --> 00:03:21,870
for the client who request an IP, you get it?

39
00:03:22,820 --> 00:03:23,590
I think you do.

40
00:03:24,050 --> 00:03:26,950
What if a hacker replies before the real DHP?

41
00:03:27,410 --> 00:03:34,100
Or what if a client sends a lot of DHP Discovery requests by changing the Mac address each time?
