1
00:00:02,590 --> 00:00:09,490
Let's discuss about iPods, electric motors and their suitability to reapplication.

2
00:00:11,590 --> 00:00:16,540
So there are several ways by which you can categorise electric motors.

3
00:00:18,150 --> 00:00:26,820
If we categorize according to the supply voltage, then we have the same motors that run directly on

4
00:00:26,820 --> 00:00:27,630
this supply.

5
00:00:29,490 --> 00:00:30,510
AC Motors.

6
00:00:31,830 --> 00:00:39,750
That once that is established, the face of single face induction by special type of induction motor.

7
00:00:41,550 --> 00:00:48,040
So it does not require any additional electronic components or any arrangement to run.

8
00:00:48,070 --> 00:00:53,330
So when we supply the disabled from the battery or any other source, it will run.

9
00:00:53,880 --> 00:00:55,620
And same for the AC motors.

10
00:00:55,620 --> 00:00:58,770
When we supply the three phases, the motor is just running.

11
00:01:00,070 --> 00:01:00,430
And.

12
00:01:01,780 --> 00:01:09,160
There are the categories that belong to U.S. mortals, it's called electronically commentated mortise,

13
00:01:09,910 --> 00:01:17,620
so these special categories of mortar's includes the different markers that needs our electronics for

14
00:01:17,980 --> 00:01:20,780
switching and position sensing arrangement.

15
00:01:21,250 --> 00:01:27,760
That means in AC motors, we might require the power, electronics and sensing arrangement that is part

16
00:01:27,760 --> 00:01:29,490
of basically drive.

17
00:01:30,220 --> 00:01:35,500
But if we think about the electric vehicle application, it is not fixed for application.

18
00:01:35,500 --> 00:01:37,060
It is variable speed application.

19
00:01:37,390 --> 00:01:45,340
And so even if the DC Motor Racing Motor Vehicle record, the power electronics controller and converters

20
00:01:45,730 --> 00:01:52,300
so that we need to compare not electric motor only, but electric motor died because of application

21
00:01:52,300 --> 00:01:54,550
is variable speed application.

22
00:01:55,380 --> 00:02:01,720
When we think about the AC motors, it can dramatically on supply, but for limited for the high speed

23
00:02:01,720 --> 00:02:04,240
applications, only for the variable speed application.

24
00:02:04,250 --> 00:02:11,740
It's like when the inverter control algorithm and the C motor also required the power electronics converter

25
00:02:11,890 --> 00:02:14,530
as well as the controller to run.

26
00:02:15,400 --> 00:02:20,580
So when we think about the variable speed application, all motors require the power electronics and

27
00:02:20,590 --> 00:02:26,650
we're switching and position and saying, I don't recall the closed loop, but it's important to the

28
00:02:26,650 --> 00:02:30,760
push and sensing always even for the open look speed control system.

29
00:02:32,230 --> 00:02:39,730
So we'll discuss further about which matters belong to categories, the D.C. murders, there are several

30
00:02:39,730 --> 00:02:47,020
kinds of murder decision to murder this if it is murder and permanent magnet D.C. murders.

31
00:02:48,060 --> 00:02:55,140
So this is it is not as used widely for the TV applications since launching the electric train or locomotive.

32
00:02:56,360 --> 00:03:03,510
And because of its produce, the high starting to square up the crime in the city's.

33
00:03:04,670 --> 00:03:12,150
So this city's motorists ideally prefer it for the electric vehicle applications based on its characteristics.

34
00:03:12,890 --> 00:03:20,110
But there are certain limitations that is high maintenance and competition process.

35
00:03:20,120 --> 00:03:24,070
It requires the mechanical commutator arrangement.

36
00:03:24,470 --> 00:03:28,550
So it's the maintenance cost.

37
00:03:28,670 --> 00:03:37,580
And due to this nowadays, we do not pay for the necessities or the industrial application of electric

38
00:03:37,580 --> 00:03:38,120
vehicle.

39
00:03:39,090 --> 00:03:47,730
So we will find various permanent magnet, this emerging market or the low to the low range, but every

40
00:03:47,760 --> 00:03:55,260
applications, but it has that limitation of Pathankot, so it cannot be used for the very high powered.

41
00:03:56,820 --> 00:04:01,740
High performance electric vehicle application, but we found somewhere in the.

42
00:04:03,320 --> 00:04:09,170
Applications of low power range below lower one kilowatt and so.

43
00:04:14,590 --> 00:04:20,890
Characteristic of BMD is identical to the decision to only set up the son.

44
00:04:22,980 --> 00:04:28,530
Instead of testator winding its way to permanent magnet to produce the magnetic flux.

45
00:04:30,970 --> 00:04:38,350
In a simulator that is induction motor and synchronous motor, but induction motor widely used in the

46
00:04:39,100 --> 00:04:42,220
application because it's a reliable operation.

47
00:04:43,030 --> 00:04:50,680
So when we see the induction motor issues with the driver, only, only the induction motor and permanent

48
00:04:50,680 --> 00:04:56,790
magnets, inkless motors are also nowadays used in various applications.

49
00:04:56,820 --> 00:05:04,090
So we'll also find some way some manufacturing companies start using the permanent magnets.

50
00:05:04,090 --> 00:05:09,660
And but there is also limitation and Sinclair Model S implementation.

51
00:05:10,210 --> 00:05:14,820
So induction motors are really used in every application in modern era.

52
00:05:15,640 --> 00:05:22,840
And if we talk about DC Motors that at Brussels, DC Motors and Switzerland, this market, we know

53
00:05:22,840 --> 00:05:26,200
that brushless DC Motors I use widely.

54
00:05:27,420 --> 00:05:34,680
In the application of electric vehicle from low power to high power range and Switzler to smartarse

55
00:05:34,680 --> 00:05:41,940
are also prepress in various applications, but in electric vehicle application, it is the most suitable

56
00:05:41,940 --> 00:05:42,480
motor.

57
00:05:43,020 --> 00:05:44,280
So it does matter.

58
00:05:44,490 --> 00:05:54,000
Nowadays, we will discuss and compare this some motor necessities more to the MDC induction motor vehicle

59
00:05:54,270 --> 00:05:56,760
in SRM along with its drive.

60
00:05:57,400 --> 00:06:01,830
It is not a good idea to compete only motor vehicle competitor.

61
00:06:03,980 --> 00:06:04,460
Joe.

62
00:06:07,230 --> 00:06:14,970
Before that, we will list out the parameters that required for the electric vehicle application, what

63
00:06:14,970 --> 00:06:18,480
is the requirement of electric vehicle application from the motor drive?

64
00:06:20,030 --> 00:06:22,150
The requirement of dry.

65
00:06:25,360 --> 00:06:31,890
It is different kinds of application because your don't need to be low voltage and high current application,

66
00:06:32,320 --> 00:06:40,420
generally the induction motor and then corporate, if it's 440 volt and the industrial voltage rating,

67
00:06:40,810 --> 00:06:46,000
but we are going to operate it on see link voltage from the battery.

68
00:06:46,300 --> 00:06:48,220
And we are having the.

69
00:06:49,460 --> 00:06:56,780
Capacity from the low voltage to high voltage, depending upon the application for bike.

70
00:06:56,820 --> 00:07:03,950
Currently we are using the county up to 72 world and highest 92 world application for the car.

71
00:07:04,160 --> 00:07:12,630
We also used the 440 volt motors, but not beyond that inside the motor.

72
00:07:12,850 --> 00:07:19,760
So when we convert the battery voltage or we connect the battery in cities and battery packs to attend,

73
00:07:19,800 --> 00:07:20,980
the certain will deliver.

74
00:07:21,380 --> 00:07:22,730
So we do that, are we?

75
00:07:23,750 --> 00:07:28,850
Intruder, we increased the battery voltage with electronic converters.

76
00:07:30,360 --> 00:07:35,720
Because transferral become bulky and costly to put inside the vehicle.

77
00:07:36,330 --> 00:07:44,310
So there is also limitation, but if you use the hourly workers to boost the voltage, required the

78
00:07:44,310 --> 00:07:48,960
higher size up in the car and a and sizable increase.

79
00:07:49,060 --> 00:07:55,380
So we generally try to use the same battery voltage according to the motor rating.

80
00:07:55,890 --> 00:08:03,510
And that's why the motor application will help low voltage and high current applications.

81
00:08:04,240 --> 00:08:10,560
This high current create some issues when we design the power electronics converter for the motor and

82
00:08:10,560 --> 00:08:11,890
its cooling arrangement.

83
00:08:12,240 --> 00:08:17,940
That's why this requirement of electric motors is slightly different than other application.

84
00:08:18,360 --> 00:08:24,930
If we design the motor for the same power for the 440 world and same power for the.

85
00:08:27,150 --> 00:08:34,740
The first 72 hours, so for the 72 year current will be very high for conduct that will be taken, then

86
00:08:34,860 --> 00:08:40,680
there should be proper calling arrangement and inside the cabinet and also the rating of the switches

87
00:08:41,070 --> 00:08:49,320
and its encouragement, all will be a special requirement in case of importance because of high current

88
00:08:49,320 --> 00:08:52,080
application for the same power.

89
00:08:54,200 --> 00:09:00,590
The second thing is we require the high starting to achieve the highest acceleration, which requires

90
00:09:00,590 --> 00:09:01,310
high starting.

91
00:09:05,700 --> 00:09:13,830
As we discussed the stocks with characteristic, we are in right constant power raising so that we can

92
00:09:13,830 --> 00:09:19,570
utilize the maximum power net and efficiency point.

93
00:09:19,980 --> 00:09:23,770
So we are interested in larger and wider question.

94
00:09:23,780 --> 00:09:27,330
Power of the model that is operating within.

95
00:09:27,540 --> 00:09:28,980
It can also be more different.

96
00:09:28,980 --> 00:09:35,790
Characteristics can also be modified with electronic control and control algorithm when we use design.

97
00:09:37,480 --> 00:09:39,890
Really quite the higher power weight issue.

98
00:09:40,120 --> 00:09:45,490
That means for the same power, weight of the motor should be as minimum as possible.

99
00:09:45,790 --> 00:09:51,460
Now we are considering the same material and then we will descend because Mortell include the cost if

100
00:09:51,470 --> 00:09:58,510
we consider the same model from the al-Mutairi adding Fisker, which Marka design will give us the minimum

101
00:09:58,510 --> 00:10:00,930
rate for the same mechanical output power.

102
00:10:04,680 --> 00:10:10,350
Obviously, we are interested in highest efficiency because we are having the limited range and we need

103
00:10:10,350 --> 00:10:17,190
to extend the range, it is a battery operated vehicle and this does require the highest efficiency

104
00:10:17,190 --> 00:10:23,130
as much as possible because currently we are manufacturing the markets in India, according to the I

105
00:10:23,160 --> 00:10:29,640
went in a to rating, but what is going beyond Difford That is premium efficiency, glass and standard

106
00:10:30,060 --> 00:10:37,380
so that we need to concentrate on the highest efficiency in manufacturing process or to the highest

107
00:10:37,380 --> 00:10:43,350
efficiency of not only matter but our own system that your stuff converts to.

108
00:10:47,110 --> 00:10:54,220
As we discussed, the current is high, we record the higher thermal vision capability that Mr..

109
00:10:55,670 --> 00:11:05,180
The that should be proper cooling arrangement and also very required to hire which capability for the

110
00:11:05,180 --> 00:11:12,860
thermal range, so according to it, change the design of the mortar to allow the cooling as well as

111
00:11:14,780 --> 00:11:17,570
this capability should be higher.

112
00:11:23,850 --> 00:11:26,290
This is something related to duty cycle.

113
00:11:26,520 --> 00:11:32,520
We know that is a continuous duty cycle, monitoring this continuous duty cycle to see some induction.

114
00:11:32,520 --> 00:11:39,360
Martha Stewart in late March in an industry or an industrial fan blower, it is going to run 24 by seven

115
00:11:39,660 --> 00:11:43,410
and we consider it is the continuous duty cycle.

116
00:11:44,490 --> 00:11:51,630
Our friend is also the continuous duty cycle because it is built to run continuously for number of hours,

117
00:11:51,630 --> 00:11:52,980
days in life.

118
00:11:53,220 --> 00:12:00,410
But some mortars that we use for the mixer grinder and blow that use for some minimum minutes, about

119
00:12:00,420 --> 00:12:03,480
10 minutes, 15 minutes, it is a discontinues duty cycle.

120
00:12:03,840 --> 00:12:12,300
So that can be much smaller for the high power rating because we know the thermal limit temperature

121
00:12:12,300 --> 00:12:13,160
increase slowly.

122
00:12:13,170 --> 00:12:20,400
And when we set it down, according to we calculate the thermal dissipation and the power of the mortar

123
00:12:20,730 --> 00:12:23,700
could be high in small and small range.

124
00:12:24,120 --> 00:12:30,360
But to predict the performance in the electrical vehicle application for the duty cycle, it's put off

125
00:12:30,600 --> 00:12:33,930
so that it is categorized in the special duty mortars.

126
00:12:34,200 --> 00:12:42,790
And yet we do not predict how it is going to be performed by the dryer because there is no train driver.

127
00:12:42,810 --> 00:12:50,460
So yet the part comes when the electric motor for the train is the different application because train

128
00:12:50,460 --> 00:12:57,570
locomotive is the application when driver is trained and it is going to run the train an electric motor

129
00:12:57,840 --> 00:12:59,250
through the mission.

130
00:12:59,700 --> 00:13:01,280
A specific procedure.

131
00:13:01,590 --> 00:13:04,200
Yes, our driver is not.

132
00:13:05,290 --> 00:13:12,340
Follow some procedure and come on, stay at different patterns and each driver, each rider will use

133
00:13:12,340 --> 00:13:17,940
their own pattern to accelerate the motor, to accelerate the vehicle to the left.

134
00:13:17,950 --> 00:13:23,000
And it's also vary by time, by time, according to their mind and mood.

135
00:13:23,410 --> 00:13:27,870
So we will observe the large variation in input speed commands.

136
00:13:28,240 --> 00:13:37,420
So we are not only the high starting target requirements, but the thermal vision capability and starting

137
00:13:37,420 --> 00:13:45,970
torque requirements also need to study the switch and how much variation is possible in terms of duty

138
00:13:45,970 --> 00:13:51,340
cycle and even the motorist categories in the continuous duty cycle application.

139
00:13:51,770 --> 00:14:00,280
That is the chance for the large amount of time we reach the big power and big torque that is beyond

140
00:14:00,280 --> 00:14:07,290
the maximum power limit or beyond the return power of the mortar, and that may raise the temperature.

141
00:14:07,300 --> 00:14:13,660
So we record the special protection also calling arrangement also, and we need to consider this point

142
00:14:14,290 --> 00:14:15,610
that need to be sturdy.

143
00:14:16,650 --> 00:14:25,440
According to the application, so every application is very different than all of that application of

144
00:14:25,440 --> 00:14:26,490
electric motor.

145
00:14:26,730 --> 00:14:28,710
As of now, we studied.

146
00:14:32,620 --> 00:14:35,870
Performance stability with temperature variation.

147
00:14:35,890 --> 00:14:42,490
This is very important point, because our motto should perform well in all the temperature conditions,

148
00:14:42,490 --> 00:14:49,830
because our vehicle is not located at one specific industry or one specific location.

149
00:14:49,840 --> 00:14:52,590
So it is going to run throughout the year.

150
00:14:52,780 --> 00:14:53,210
It may.

151
00:14:53,290 --> 00:14:55,690
It is running and some of it is running in winter.

152
00:14:55,690 --> 00:14:58,360
It is running in different locations in different time.

153
00:14:58,690 --> 00:15:01,630
So that should be considered.

154
00:15:01,630 --> 00:15:09,430
The performance of the master and controller should be remain stable and should not deter it with variation

155
00:15:09,430 --> 00:15:10,340
in temperature.

156
00:15:10,660 --> 00:15:18,490
So because this motor is always going to experience a wide range of temperature even in the winter,

157
00:15:18,730 --> 00:15:19,750
during the summer.

158
00:15:19,990 --> 00:15:26,920
So if we consider the thermal capability, it is different depending upon the region and different depending

159
00:15:26,920 --> 00:15:33,490
upon the weather conditions of normal temperature of different countries, and different reason that

160
00:15:33,820 --> 00:15:42,690
we also need to understand when we build the water supplying to the general region so that performance

161
00:15:42,700 --> 00:15:49,270
stability should be studied according to the maximum range of temperature variation.

162
00:15:53,780 --> 00:16:00,810
And is of controllability and its implementation, that means the implementation of control systems.

163
00:16:00,830 --> 00:16:07,830
It should be easy and reliable as well as the cost effective, the controllability.

164
00:16:07,880 --> 00:16:14,810
It means the control lost, control of acceleration, control of reverse, our flow, control of regenerative

165
00:16:14,810 --> 00:16:19,430
braking and control of electric braking whenever it's required.

166
00:16:19,760 --> 00:16:21,110
So all this should be.

167
00:16:22,230 --> 00:16:29,550
Very easy to implement and easy to control, depending on the matter and speed control techniques,

168
00:16:29,760 --> 00:16:32,850
that is akin to the electric drive.

169
00:16:38,140 --> 00:16:46,780
Then we need the high reliability, the reliability of the tests should be high as the vehicle itself.

170
00:16:47,140 --> 00:16:54,300
We are going to run for a number of years, up to 10 or 20 plus years and use the vehicle.

171
00:16:54,310 --> 00:17:01,660
So we want its maximum reliability and we want this maintenance when we consider the motor plus drive

172
00:17:01,990 --> 00:17:10,210
very quick, that maintenance would be a minimum and the manufacturing cost of the markup should also

173
00:17:10,210 --> 00:17:11,460
be minimal.

174
00:17:12,040 --> 00:17:16,240
So many effects and cost, including the material as well as the manufacturing process.

175
00:17:16,660 --> 00:17:19,390
There are certain things when it comes to the process.

176
00:17:20,050 --> 00:17:23,920
Some motus the contract manufacturing cost.

177
00:17:26,230 --> 00:17:33,310
So now we are having this barometer starting to cost and power is in power, which is efficiency, thermal

178
00:17:33,310 --> 00:17:40,060
capability, temperature variation, controllability, reliability, maintenance and caution, I will

179
00:17:40,060 --> 00:17:47,260
compare the different electric motor drive for this barometer's that is required by the motors or electric

180
00:17:47,260 --> 00:17:48,850
vehicle application.

181
00:17:49,570 --> 00:17:52,780
Let's do one by one so we will have the parameter.

182
00:17:52,780 --> 00:18:01,150
We'll compare the necessities, motor, the MDC, motor induction, motor drivability and etc. And yet

183
00:18:01,150 --> 00:18:04,840
we are comparing electric motor drive and not only the motor.

184
00:18:06,560 --> 00:18:13,130
If we consider the starting talk, this emoter has the high starting thought, the implicit drive,

185
00:18:13,490 --> 00:18:16,250
the moderates starting to induction motor drive.

186
00:18:16,490 --> 00:18:21,200
Now, remember, induction motor does not hold the high starting thought, but when we say the induction

187
00:18:21,200 --> 00:18:25,860
motor drive with the help of safety, we cannot get to higher starting thought.

188
00:18:25,910 --> 00:18:26,520
That's right.

189
00:18:26,540 --> 00:18:29,470
I told you, we are discussing induction motor, right?

190
00:18:29,840 --> 00:18:32,580
Because it is better in current scenario.

191
00:18:32,690 --> 00:18:41,060
We are not discussing only motor induction, motor drive and definitely produce the same the SRM.

192
00:18:41,100 --> 00:18:44,150
What this all can produce a high starting thought.

193
00:18:45,560 --> 00:18:46,820
But not the embassy.

194
00:18:49,010 --> 00:18:54,530
If we consider the cost far easier, as we discussed, the required, the higher cost and decision,

195
00:18:55,040 --> 00:19:01,690
it is more debt for the necessities of life MDC as well as the industrial market, that has some limitations.

196
00:19:01,700 --> 00:19:06,410
But we can extend this constant barbarism in the illicit drug and SRM drive.

197
00:19:06,680 --> 00:19:08,980
Much is limited compared to other markets.

198
00:19:09,380 --> 00:19:16,820
So you can see the green light often present can be attained with the reality and SRM drive.

199
00:19:21,330 --> 00:19:30,150
Our weight ratio, so the power of be smarter and policymakers are low because it requires extra components

200
00:19:30,150 --> 00:19:35,820
like the commuter train buses, which includes the weight and induction model, the good part, weight

201
00:19:35,840 --> 00:19:39,080
ratio, good design can also change it from moderate to high.

202
00:19:39,390 --> 00:19:45,840
But the reality is that Democrats more generally in the hyper weight that come with the compact and

203
00:19:45,840 --> 00:19:51,630
smaller size as a markup, which compared to the benefit.

204
00:19:54,680 --> 00:20:02,540
If we consider the efficiency that is in D.C., more efficiency is less with compared to other because

205
00:20:03,470 --> 00:20:07,850
there have been losses in communication and also and.

206
00:20:09,100 --> 00:20:09,580
TheRap.

207
00:20:11,590 --> 00:20:19,930
Competitively, we can achieve the efficiency to the 70, 75 hot beyond 80 percent also, but yet in

208
00:20:19,930 --> 00:20:28,540
this remote area, efficiency greater than 90 percent and selection water efficiency is high with the

209
00:20:28,540 --> 00:20:33,630
help of induction motor play only when it is virtually under control.

210
00:20:33,850 --> 00:20:40,900
And only we can achieve the second point that we need to consider the efficiency with the variation

211
00:20:40,900 --> 00:20:47,410
in load, because we see the variation is lower, that different condition at slow speed, high speed

212
00:20:47,800 --> 00:20:56,500
with the one with the one passenger to passenger, three passenger like the what is the lower accordingly

213
00:20:56,500 --> 00:21:02,530
the efficiency of the motor chain, because modular design is designed to produce the highest efficiency

214
00:21:02,530 --> 00:21:08,650
at certain amount of load, but with lower variation at the light, lower efficiency of induction motor

215
00:21:08,650 --> 00:21:15,640
is reduced, but with the help of modern day, we can achieve the highest efficiency at different range

216
00:21:15,670 --> 00:21:17,110
of speed.

217
00:21:17,110 --> 00:21:24,010
Also, the race and induction motors running at the lower speed efficiencies degraded.

218
00:21:25,050 --> 00:21:26,820
But we cannot use.

219
00:21:26,890 --> 00:21:29,140
We are comparing driving it's high.

220
00:21:29,700 --> 00:21:36,390
Likewise, merely CNN remote has the highest efficiency, even with the variation in law.

221
00:21:36,710 --> 00:21:39,400
Yet we are having the benefit with variation in law.

222
00:21:39,930 --> 00:21:41,760
We are in the highest efficiency.

223
00:21:42,950 --> 00:21:49,340
Because when motor vehicle is running at low speed, we also need to maintain the highest efficiency.

224
00:21:52,250 --> 00:22:00,380
If you compare the effect of temperature variation and thermal concentration, that is, yet it is moderated

225
00:22:00,380 --> 00:22:07,100
list, but part of the MDC, it is high because when permanent magnets comes magnet property, Detriot

226
00:22:07,100 --> 00:22:14,060
and temperature and it effect the overall performance off of the same thing happens for the less, they

227
00:22:14,090 --> 00:22:19,890
say, more far reaching for the permanent magnet because the materials include permanent magnet.

228
00:22:20,210 --> 00:22:25,030
It's also about the effect of temperature, radiation and high temperatures.

229
00:22:25,130 --> 00:22:26,900
Performance of valises like.

230
00:22:29,210 --> 00:22:37,910
So we are having induction that Netzarim has two motors can handle this variation on effect of temperature

231
00:22:37,910 --> 00:22:38,480
variation.

232
00:22:42,220 --> 00:22:49,360
If we talk about the controllability, the D.C. matters and the highest and easiest way to control the

233
00:22:49,360 --> 00:22:56,680
speed of the Murkoff, but for the induction moderated a little bit complex algorithm and to implement

234
00:22:56,680 --> 00:23:01,980
the speed control techniques it's required to detect or control and repeat.

235
00:23:02,350 --> 00:23:11,750
But it's only limitation because high, dynamic, responsive and really quick we need to control on

236
00:23:11,770 --> 00:23:20,200
either side will be synesthetic, can implement the voltage and current controller same way like we

237
00:23:20,200 --> 00:23:21,700
implemented to be smarter.

238
00:23:22,210 --> 00:23:23,980
We can see the speed.

239
00:23:23,980 --> 00:23:30,910
Controllability is somehow easy in the in its attempt to implement it compared to induction motor drive.

240
00:23:33,150 --> 00:23:42,330
Reliability, reliability, prediction market, really, but because of the existence of gross and committed

241
00:23:42,960 --> 00:23:46,140
reliability, if they see us as somehow less.

242
00:23:48,810 --> 00:23:55,740
Let's come to the manufacturing cost, the manufacturing cost of this motor and predicted high cost

243
00:23:55,740 --> 00:24:00,930
of college required the magnets for manufacturing cost is high because the cost of magnets is too high

244
00:24:01,110 --> 00:24:06,320
compared to other components and will also use the magnets, the cost of fuel.

245
00:24:06,380 --> 00:24:08,940
This is also slightly higher than that.

246
00:24:08,940 --> 00:24:10,420
Saddam and Martha.

247
00:24:12,100 --> 00:24:19,400
And this is it is not cost is high because it requires the commutator inverse arrangement and this required

248
00:24:19,440 --> 00:24:22,340
additional process and materials to cost.

249
00:24:22,840 --> 00:24:30,190
Yet in reality, the magnet placement also into the magnet placement, they think includes the manufacturing

250
00:24:30,190 --> 00:24:31,150
process and.

251
00:24:32,120 --> 00:24:39,470
It's also in the manufacturing times, our cost increase, where if we consider that suddenly is having

252
00:24:39,470 --> 00:24:46,250
the simplest structure among the almatov repairing the router with no ending, only the laminated code

253
00:24:46,760 --> 00:24:52,100
and stamping, we need to join together to form the router and state that also in the salient point

254
00:24:52,250 --> 00:24:54,100
in vending is also simple.

255
00:24:54,350 --> 00:25:03,250
The manufacturing, the switch that does matter is the lesson cost and also Foshan process.

256
00:25:03,350 --> 00:25:08,910
All this make it the lowest cost when it comes to manufacturing costs of the Mozza.

257
00:25:12,760 --> 00:25:19,210
If you think about the maintenance and maintenance of this emoter high due to commuter train crashes,

258
00:25:19,540 --> 00:25:26,500
but induction and the maintenance cost is less as we know, same for the similar to more transparent

259
00:25:26,500 --> 00:25:26,850
motor.

260
00:25:27,160 --> 00:25:29,260
The maintenance costs, the less.

261
00:25:34,320 --> 00:25:41,400
So if we look at this table and green number, we can have an idea, ideally three mortar induction

262
00:25:41,750 --> 00:25:48,510
mortar and that Saddam has that a mortar drive, I proofread for the electrical vehicle application.

263
00:25:48,960 --> 00:25:56,130
Yet SRM Drive is more suitable for the electric vehicle application, have restlessly simulators are

264
00:25:56,130 --> 00:25:59,100
used widely nowadays for the electric vehicle application.

265
00:25:59,490 --> 00:26:06,450
But the industry is going to want to switch to smarter because it does not use any magnet and to avoid

266
00:26:06,450 --> 00:26:11,850
the limitation of magnet temperature, radiation, magnetic cost and supply of the magnets.

267
00:26:12,390 --> 00:26:19,200
We are now thinking about the magnet less motor, which having the same kind of performance so that

268
00:26:19,410 --> 00:26:24,820
the switch does not gaining too much attention or the electric vehicle application.

269
00:26:24,900 --> 00:26:25,580
Now this.
