WEBVTT

0:00:09.580000 --> 0:00:12.240000
 So let's talk a little
 bit about file carving.

0:00:12.240000 --> 0:00:18.680000
 First question you probably has is,
 what is file carving exactly?

0:00:18.680000 --> 0:00:25.760000
 To put this simple, file carving is
 the process of extracting files that

0:00:25.760000 --> 0:00:30.740000
 are not accessible to the user in
 an attempt to reassemble them.

0:00:30.740000 --> 0:00:34.140000
 Typically this is going to be done to
 recover files that have been deleted

0:00:34.140000 --> 0:00:36.580000
 but not overwritten.

0:00:36.580000 --> 0:00:40.980000
 To simplify that even further, it's
 what it says up here on the screen.

0:00:40.980000 --> 0:00:44.600000
 File carving is the process of extracting
 files that are not accessible

0:00:44.600000 --> 0:00:50.840000
 to the user. So why exactly
 is this necessary?

0:00:50.840000 --> 0:00:56.680000
 Well we can go through this process
 whenever the file is not available

0:00:56.680000 --> 0:00:58.760000
 again for some reason.

0:00:58.760000 --> 0:01:03.320000
 Either the operating system can't see it
 or when you do a forensic extraction

0:01:03.320000 --> 0:01:09.680000
 it's been deleted or maybe the MBR or
 the file system has been damaged.

0:01:09.680000 --> 0:01:12.140000
 So why is file carving necessary?

0:01:12.140000 --> 0:01:16.460000
 Well we can carve out our files whenever
 that file system cannot provide

0:01:16.460000 --> 0:01:18.980000
 access to it natively.

0:01:18.980000 --> 0:01:23.880000
 What that means is that you know the
 file it may be deleted but it could

0:01:23.880000 --> 0:01:28.840000
 also be that the file system itself
 that could be corrupted or the disk

0:01:28.840000 --> 0:01:31.000000
 might have some damage to it.

0:01:31.000000 --> 0:01:37.680000
 So what we're doing when we carve out
 that file is that we're going to

0:01:37.680000 --> 0:01:43.300000
 utilize certain strategies to locate
 a file and pull the data out of the

0:01:43.300000 --> 0:01:46.920000
 file. And those strategies are going
 to be we're going to do file header

0:01:46.920000 --> 0:01:51.540000
 carving. We're going to carve for the
 header and the footer or the footer

0:01:51.540000 --> 0:01:55.800000
 of a file and then we're going to maybe
 parse through the file structure

0:01:55.800000 --> 0:01:58.940000
 and carve out the file
 through that structure.

0:01:58.940000 --> 0:02:02.580000
 Or we're going to look at metadata and
 see if metadata gives us any clues

0:02:02.580000 --> 0:02:04.480000
 as to the file structure.

0:02:04.480000 --> 0:02:09.660000
 Now what we mean like when we look
 at file header the tool or even the

0:02:09.660000 --> 0:02:17.300000
 examiner can sort through the file,
 the data on the disk and look for

0:02:17.300000 --> 0:02:22.300000
 common bits and bytes that
 we call file headers.

0:02:22.300000 --> 0:02:27.420000
 So that's going to be a unique signature
 that identifies what type of

0:02:27.420000 --> 0:02:29.920000
 file we are looking at for a user.


0:02:29.920000 --> 0:02:32.400000
 And then if we're looking for headers
 and footers again we're looking

0:02:32.400000 --> 0:02:34.340000
 for known structures to files.

0:02:34.340000 --> 0:02:38.260000
 We know that a lot of files have a certain
 type of file header and then

0:02:38.260000 --> 0:02:42.860000
 we have a certain type of byte that
 signifies the end of the file which

0:02:42.860000 --> 0:02:44.200000
 is the footer of a file.

0:02:44.200000 --> 0:02:47.660000
 And so what we will do is we will try
 and carve out all the data between

0:02:47.660000 --> 0:02:53.680000
 the header and between the footer of
 that file and then see if we can

0:02:53.680000 --> 0:02:55.980000
 extract the data out of the file.

0:02:55.980000 --> 0:02:59.600000
 Metadata file carving in a sense we're
 looking at the metadata of the

0:02:59.600000 --> 0:03:03.860000
 file, the descriptive information that
 the file was given upon creation

0:03:03.860000 --> 0:03:06.520000
 and to see if we can
 pull it out here.

0:03:06.520000 --> 0:03:12.000000
 Now there are a few requirements when
 we are looking at carving files

0:03:12.000000 --> 0:03:17.040000
 and here we go. Where do we have difficulties
 when we're carving files

0:03:17.040000 --> 0:03:21.260000
 and those difficulties are going to
 occur when a file is compressed?

0:03:21.260000 --> 0:03:27.780000
 It's going to have problems when a file
 has been overwritten and sometimes

0:03:27.780000 --> 0:03:33.800000
 especially if the file system is damaged
 we're going to have trouble carving

0:03:33.800000 --> 0:03:42.380000
 a file if the files are not sitting in
 consecutive or contiguous clusters.

0:03:42.380000 --> 0:03:49.780000
 Even still you need to think that file
 carving can be very time consuming

0:03:49.780000 --> 0:03:52.800000
 and it may not produce
 useful evidence.

0:03:52.800000 --> 0:03:57.480000
 Luckily most forensic tools support
 some degree of automated carving.

0:03:57.480000 --> 0:04:00.800000
 The results may not be perfect but
 they can get you there and they can

0:04:00.800000 --> 0:04:04.660000
 get you to a good start.

0:04:04.660000 --> 0:04:09.100000
 Sometimes you can do file carving as
 a secondary task in our forensic

0:04:09.100000 --> 0:04:14.140000
 tools so you can begin some of your
 case investigations and looking at

0:04:14.140000 --> 0:04:18.800000
 what's going on in the file system
 as file carving is still happening

0:04:18.800000 --> 0:04:19.640000
 in the background.

0:04:19.640000 --> 0:04:25.680000
 They'll do realize that that file carving
 in the background and file carving

0:04:25.680000 --> 0:04:30.140000
 in general can be very resource
 intensive on your system.

