WEBVTT

00:01.630 --> 00:08.340
Welcome to the section on using Kelly Linux for effective network scanning.

00:08.520 --> 00:11.160
Now we have all the introductory stuff out of the way.

00:11.220 --> 00:12.680
Let's get started.

00:13.700 --> 00:16.970
In this video we're going to head to w w w.

00:17.180 --> 00:20.390
Dot org and download Khaleel Linux.

00:20.390 --> 00:27.110
Then we're going to install Cadillac's as a virtual machine and install VM Ware tools which will enhance

00:27.110 --> 00:29.880
the performance of our Kalli install.

00:29.890 --> 00:35.110
Finally we're going to make some initial modifications to the calling environment to make our experience

00:35.110 --> 00:37.500
more comfortable and secure.

00:39.290 --> 00:44.540
Now before we get started make sure you're ready to install Kallie in a configuration that meets the

00:44.540 --> 00:47.210
minimum installation requirements.

00:47.210 --> 00:51.590
That includes a minimum of 20 gigabytes of disk space.

00:51.620 --> 00:55.100
I'm going to configure my VM with at least 40.

00:55.130 --> 01:02.020
We also need a minimum of one gigabyte of RAM but I'm going to use at least two gigabytes and we need

01:02.020 --> 01:05.970
to make sure our system can boot from a CD or USP drive.

01:07.530 --> 01:13.120
So to get started let's head to w w w dot Kelly dot org.

01:16.340 --> 01:25.100
Then we'll click on downloads and choose download Kelly Linux.

01:25.290 --> 01:30.900
And here we're going to see all the various downloads for Kalli depending on which system architecture

01:30.900 --> 01:31.660
you're running.

01:32.570 --> 01:38.900
Since I'm going to run this on VM where fusion for the Mac I'm going to go under the Kalli Linux 64

01:38.900 --> 01:46.130
bit VM where VM listing and click the offensive security download page and from that page I'm going

01:46.130 --> 01:55.170
to click the Cali Linux 64 bit VM link and once I hit that link my download is going to begin in the

01:55.170 --> 01:56.040
background.

01:59.600 --> 02:05.980
And now I'm going to check my downloads folder to ensure the file is ready to go which it looks like

02:05.980 --> 02:07.150
it is.

02:07.150 --> 02:15.340
So now I can fire up my VM where fusion software and begin the process of importing this VM and booting

02:15.340 --> 02:17.000
it up as a live system.

02:19.920 --> 02:26.010
With my VM where fusion software open I'm going to click on the plus button and then click Import

02:28.510 --> 02:38.030
click Choose file here and then point to the Kelly overweigh file that we just downloaded click open

02:39.620 --> 02:42.290
and then click continue.

02:42.290 --> 02:45.160
Now here you will be asked to provide a name for the file.

02:45.200 --> 02:47.270
You can call it whatever you want.

02:48.020 --> 02:52.120
And once you've chosen your title just click on Save

02:55.290 --> 03:00.240
and now just to wait a couple of minutes while the virtual machine is imported.

03:02.340 --> 03:08.810
When the import is done click customize settings as there is a few setting changes we may want to make

03:10.760 --> 03:11.600
first click.

03:11.620 --> 03:13.550
Network adapter.

03:13.550 --> 03:19.420
There are several different network adapter configurations we can use for our virtual machine.

03:19.430 --> 03:25.940
One is to share with my Mac which is the default and all that really means is that the calling VM is

03:25.940 --> 03:32.030
going to share my IP as it accesses the local network and Internet.

03:32.030 --> 03:39.200
Personally I like to use the bridged networking option which means my calling VM will grab an IP out

03:39.200 --> 03:46.470
of the local DHP scope on my network and operate like a true independent host on the network.

03:46.670 --> 03:54.110
So I'm going to click the Wi-Fi selection here because my Mac is using Wi-Fi to connect to my network.

03:54.240 --> 04:00.510
All right I'm going to click show all and let's just take a quick peek at processors and memory just

04:00.510 --> 04:07.110
to make sure that our VM is configured for at least the minimum hardware requirements which it looks

04:07.110 --> 04:08.550
like it is.

04:08.580 --> 04:18.150
So I think we can close this window and click the big play button to launch our first boot of this new

04:18.430 --> 04:19.230
Kelly.

04:20.460 --> 04:26.210
And if you get this warning here about upgrading the virtual machine just go ahead and click upgrade

04:26.230 --> 04:28.750
and then the boot process should continue.

04:33.950 --> 04:39.000
All right while this is booting Let's take it full screen just to make it a little bit easier on the

04:39.000 --> 04:47.550
eyes and then for our initial log in we're going to use username of root and password of tour t o o

04:47.590 --> 04:56.370
r if all went according to plan you should be looking at the desktop for your freshly built coffee machine.

04:57.390 --> 05:03.540
Now one of the first things we'll want to do is install VM where tools which improve the performance

05:03.570 --> 05:11.940
and overall management of our virtual machine I'm running Kalli Linux 20:17 3 and it looks like the

05:11.940 --> 05:18.210
installation of VM Ware tools must have happened automatically during the install because under my virtual

05:18.210 --> 05:23.500
machine menu here I only have the option for re-installing the tools.

05:23.730 --> 05:29.220
If they're not installed in your virtual machine look for an option to do so in the menus of your virtual

05:29.220 --> 05:30.440
machine software.

05:31.740 --> 05:35.610
Next we need to change our root password from the default.

05:35.940 --> 05:42.850
You might have noticed we logged in with the extremely weak password of all lowercase t o o r.

05:43.230 --> 05:45.880
So let's change that to something stronger.

05:45.930 --> 05:52.080
Open up the terminal in the left hand side menu of your screen and type the password command which is

05:52.200 --> 05:57.160
P A S S W D when prompted.

05:57.160 --> 06:03.890
Provide a long strong password with a mix of upper and lower case numbers and symbols.

06:04.300 --> 06:07.550
I recommend the password of at least 14 characters.

06:07.750 --> 06:14.630
But then again I wear a tinfoil hat most of the day to you also may have noticed that when we downloaded

06:14.630 --> 06:23.060
Cali the Kelly dot org web page warned us that our machine might have pre-generated S-sh keys to change

06:23.060 --> 06:29.720
those keys from the default will issue the following commands what these commands do is generate a fresh

06:29.720 --> 06:37.090
set of unique keys for our system so that we reduce the chance of a man in the middle attack for even

06:37.090 --> 06:37.930
better security.

06:37.930 --> 06:42.370
You could install your public S-sh key on your system.

06:42.530 --> 06:47.360
However because I'm only going to be connecting to this system from my local network I'm just going

06:47.360 --> 06:55.370
to refresh the S-sh keys in a later module will also be adding a non-root user for day to day operations

06:55.370 --> 06:56.200
on our system

06:59.780 --> 07:00.650
by default.

07:00.680 --> 07:06.100
Calling comes with a rather aggressive screensaver that locks that screen with your password.

07:06.100 --> 07:12.920
After just a few minutes again because I'm using this system as a VM on my local network I'm going to

07:12.920 --> 07:16.400
disable the screensaver so I don't have to keep punching in the password.

07:16.400 --> 07:19.030
Over and over again to do that.

07:19.030 --> 07:20.910
Let's go into Kalli settings

07:29.120 --> 07:39.550
cook into the power options and under a blank screen choose never and then in the privacy settings under

07:39.550 --> 07:47.250
screen lock set automatic screen lock to off OK.

07:47.250 --> 07:54.790
The final initial tweak I want to do is set up a shared folder between the Kelly VM and my Mac.

07:54.810 --> 08:00.240
This is handy if you have to sneakernet files between the two systems and don't want to have to fiddle

08:00.240 --> 08:02.930
with setting up file shares or anything like that.

08:04.000 --> 08:11.440
So nvm where fusion I'm going to head to the virtual machine menu and choose settings and then sharing

08:12.670 --> 08:24.130
here I'm going to click Enable shared folders click the plus button and pick a folder on my Mac.

08:24.240 --> 08:26.140
Now to actually mount that folder.

08:26.180 --> 08:32.230
I'm going to double click this handy dandy script that comes preloaded right on our desktop.

08:32.300 --> 08:35.950
Now initially when you run this file it won't look like anything happened.

08:36.260 --> 08:44.590
But if you click the files button on the left hand side of the screen type of slash forward slash and

08:44.590 --> 08:52.840
then enter the path of M and T slash h g f s You'll see the folder name that you shared with your host

08:52.840 --> 08:53.650
machine.

08:54.130 --> 09:00.580
And now any files and folders you stick in this folder will be shared between your host machine and

09:00.580 --> 09:03.050
your Kelly VM which is quite handy.

09:04.550 --> 09:10.910
In the next video we'll use system commands to validate connectivity with both our local network as

09:10.910 --> 09:15.100
well as the Internet to make sure our network settings are configured properly.
