1
00:00:00,380 --> 00:00:07,890
And this lecture I'm going to show you how to connect a USP device to a virtual machine as an example.

2
00:00:07,920 --> 00:00:14,430
I'm going to be connecting a wireless adapter to my Cali machine but the same method can be used to

3
00:00:14,430 --> 00:00:16,920
connect any US be device.

4
00:00:16,920 --> 00:00:23,160
Now as mentioned in the course requirements you need a wireless adapter for the cracking section of

5
00:00:23,160 --> 00:00:23,830
this course.

6
00:00:23,910 --> 00:00:29,420
So these are the lectures where we're going to show you how to crack the passwords for Wi-Fi networks.

7
00:00:29,580 --> 00:00:34,920
Other than that you can do everything else on the course without a wireless adapter.

8
00:00:34,920 --> 00:00:41,130
What I mean by a wireless adapter is a USP device that connects through your speech your computer and

9
00:00:41,130 --> 00:00:44,580
it allows you to communicate with wireless networks.

10
00:00:44,580 --> 00:00:50,240
Now most computers and laptops come with a built in wireless card.

11
00:00:50,310 --> 00:00:56,600
The only problem is first of all you can't access built in wireless cards from a virtual machine.

12
00:00:56,640 --> 00:01:03,150
Also even if you can so even if you install Kalli as a main machine the built in wireless cards are

13
00:01:03,150 --> 00:01:09,900
not good for hacking because we need a powerful adapter that supports monitor mode and packet injection

14
00:01:10,260 --> 00:01:12,740
and we're going to go into what each of these mean.

15
00:01:13,350 --> 00:01:20,910
But basically the built in wireless adapter does not support these modes and can't be used for hacking.

16
00:01:20,910 --> 00:01:24,480
That's why I recommend powerful wireless adapters.

17
00:01:24,490 --> 00:01:29,320
They're listed in the course requirements and I'm going to list them and the resources of this lecture

18
00:01:29,520 --> 00:01:31,370
and you can connect them to Cali.

19
00:01:31,440 --> 00:01:33,200
Like I'm going to show you right now.

20
00:01:33,540 --> 00:01:38,970
So I already have virtual box open and you just want to click the machine that you want to connect the

21
00:01:38,970 --> 00:01:40,860
adapter to.

22
00:01:40,860 --> 00:01:44,270
We're going to go to settings.

23
00:01:44,370 --> 00:01:47,020
We're going to go to port.

24
00:01:47,050 --> 00:01:57,050
We're going to go to US B and make sure that US B is enabled and you want to pick the option that is

25
00:01:57,050 --> 00:01:58,370
used by your adapter.

26
00:01:58,400 --> 00:02:00,710
So it's either us be one two or three.

27
00:02:01,190 --> 00:02:05,340
And for the adapter that I have it uses us to.

28
00:02:05,580 --> 00:02:09,000
Then you want to come here to the plus sign and click on it.

29
00:02:10,120 --> 00:02:16,540
Now you'll see that I have a number of devices that I can attach to the Callimachi and now I still haven't

30
00:02:16,540 --> 00:02:18,350
connected the adapter.

31
00:02:18,370 --> 00:02:21,550
So first of all I'm just going to have a look on the available devices.

32
00:02:22,410 --> 00:02:28,300
Then I'm going to connect the adapter and I'm going to list the devices again.

33
00:02:28,540 --> 00:02:34,110
I did that because we're assuming that I don't know the name of my adapter because the name that you'll

34
00:02:34,150 --> 00:02:41,410
see here is the name of the chipset that's used inside the adapter so it's not the brand name that you

35
00:02:41,410 --> 00:02:43,840
see on the adapter itself.

36
00:02:43,840 --> 00:02:50,230
So when I click on it now you'll see that I have a new entry called Atheros and this is actually my

37
00:02:50,230 --> 00:02:51,310
wireless adapter.

38
00:02:51,310 --> 00:02:55,980
It's an alpha AWOS 0 3 6 and a.

39
00:02:56,590 --> 00:02:58,160
So I'm going to click on it.

40
00:02:58,480 --> 00:03:01,220
That's it either here we're going to click on.

41
00:03:01,240 --> 00:03:02,140
OK.

42
00:03:03,200 --> 00:03:06,240
And that's Dr. Kelly.

43
00:03:06,300 --> 00:03:13,500
Now before we start Kelly we have to install Virtual Box extensions to allow virtual box to use this

44
00:03:13,500 --> 00:03:15,450
USP device.

45
00:03:15,450 --> 00:03:18,640
Now the download link will be included in the resources.

46
00:03:18,900 --> 00:03:23,260
I have the page already opened in here and you can see it here.

47
00:03:23,280 --> 00:03:30,490
We have a link for virtual box extension pack and you can just click on this link to download it.

48
00:03:30,550 --> 00:03:35,460
Now this will only work for Virtual Box 5.1 0.22.

49
00:03:35,740 --> 00:03:41,650
If you have a different version so to get your version you can just go to virtual box about virtual

50
00:03:41,650 --> 00:03:42,380
box.

51
00:03:42,850 --> 00:03:48,670
If you're on Windows you'll have to go to file about virtual box and you'll see that I'm on five point

52
00:03:48,670 --> 00:03:50,500
zero point twenty.

53
00:03:50,500 --> 00:03:53,770
So I have to come back here and I don't have the latest version.

54
00:03:53,800 --> 00:03:56,590
So I'm going to have to go down to the Virtual Box.

55
00:03:56,590 --> 00:04:00,780
All their builds go on 5.0

56
00:04:03,520 --> 00:04:13,350
and look for five point 0.20 and download it's extension pack so if you have the latest version that's

57
00:04:13,350 --> 00:04:16,090
listed on the main page then download it from there.

58
00:04:16,170 --> 00:04:22,530
If you have an older version go to the old builds like I did scroll down and download the one that is

59
00:04:22,530 --> 00:04:25,260
compatible with your version.

60
00:04:25,290 --> 00:04:31,210
Now once it's downloaded you'll be able to find it in your downloads or to whatever location you downloaded

61
00:04:31,210 --> 00:04:32,980
it to.

62
00:04:33,060 --> 00:04:35,990
Then you can just double click it to install it.

63
00:04:36,240 --> 00:04:39,270
So this is the one that's compatible with my virtual box.

64
00:04:39,450 --> 00:04:40,980
I'm going to DoubleClick it.

65
00:04:43,870 --> 00:04:48,370
And as you can see for me it's telling me that it's already installed for you.

66
00:04:48,370 --> 00:04:50,600
It's just going to give you uninstall button.

67
00:04:50,620 --> 00:04:53,220
For me it's called reinstall.

68
00:04:53,230 --> 00:04:56,360
So I'm just going to reinstall it just to show you how it's going to go.

69
00:04:56,620 --> 00:05:01,710
And when you scroll down and agree put your password

70
00:05:04,790 --> 00:05:08,140
and that's it the extension pack is installed.

71
00:05:08,240 --> 00:05:12,890
So I'm going to hit enter now before starting my virtual machine.

72
00:05:13,040 --> 00:05:19,370
I'm going to physically disconnect my wireless adapter and then I'm going to connect the adapter once

73
00:05:19,370 --> 00:05:21,840
Kelly fully loads.

74
00:05:22,040 --> 00:05:23,420
Now I'm going to start it.

75
00:05:28,030 --> 00:05:32,520
So I'm going to put my user name which is rude and my password which is t o r

76
00:05:35,760 --> 00:05:36,700
ok now.

77
00:05:36,750 --> 00:05:38,090
Is fully loaded.

78
00:05:38,160 --> 00:05:44,920
I'm going to go and physically connect my wireless adapter like I said I usually do this just to avoid

79
00:05:45,010 --> 00:05:46,270
any conflicts.

80
00:05:46,450 --> 00:05:52,430
Now once they are doctors connected you want to make sure that it's attached to Cali and to do that.

81
00:05:52,450 --> 00:05:54,860
We're going to go to the devices menu.

82
00:05:55,060 --> 00:05:57,140
So we're going to go all the way to the top.

83
00:05:57,160 --> 00:05:58,850
We're going to go to devices.

84
00:05:58,930 --> 00:06:05,140
We're going to go on you as we were going to make sure that this adapter right here is checked.

85
00:06:05,160 --> 00:06:07,530
Now sometimes it might not be checked for you.

86
00:06:07,590 --> 00:06:09,090
So click on it to check it.

87
00:06:09,210 --> 00:06:10,650
For me it's already checked.

88
00:06:10,650 --> 00:06:11,880
So I'm not going to click it.

89
00:06:14,100 --> 00:06:22,640
And to confirm that the adapter is connected we can just go on terminal right here and type ifconfig

90
00:06:27,240 --> 00:06:32,420
this command lists all the interfaces that's connected to the machine.

91
00:06:32,830 --> 00:06:38,990
And as you can see now it's showing an adapter called None zero which is the wireless adapter.

92
00:06:39,060 --> 00:06:42,330
So if you have this in here that means your adapter is connected.

93
00:06:42,390 --> 00:06:46,650
If you don't then ask in the discussions and I'll help you through this.

94
00:06:46,650 --> 00:06:48,950
Some adapters are not compatible with Candy.

95
00:06:48,990 --> 00:06:52,230
So that could be the issue or the issue could be something else.

96
00:06:53,640 --> 00:07:00,750
Also Now if we go here on the top right you'll see that I have a wife by option which I can use to connect

97
00:07:00,750 --> 00:07:02,640
to I find networks.

98
00:07:02,700 --> 00:07:07,430
Now we don't need to do this because I showed you how to set up and not network.

99
00:07:07,500 --> 00:07:11,130
And Kelly already has Internet access through this not network.

100
00:07:11,130 --> 00:07:17,160
So we only need the wireless adapter to hack into other networks to crack their passwords.

