1
00:00:00,980 --> 00:00:09,200
Address each network card whether it's Wi-Fi card or wild card it has a physical static address assigned

2
00:00:09,200 --> 00:00:16,220
by the card manufacturer called the MAC address Media Access Control this MAC address is actually written

3
00:00:16,520 --> 00:00:18,520
on your card and it's physical.

4
00:00:18,520 --> 00:00:24,610
So it doesn't it never changes for your card for your specific card for example for your wife or a card.

5
00:00:24,620 --> 00:00:25,600
It will never change.

6
00:00:25,610 --> 00:00:28,140
It will always be the same.

7
00:00:28,310 --> 00:00:34,760
The MAC address is used between devices to identify each other and to transfer packets and the right

8
00:00:34,760 --> 00:00:35,990
direction.

9
00:00:35,990 --> 00:00:42,860
This works by each packet has a source mark and a destination mag and it travels from the source smog

10
00:00:43,160 --> 00:00:44,760
to the destination.

11
00:00:45,200 --> 00:00:53,090
Now because the MAC address is static and it never changes it can be used to trace you back and to identify

12
00:00:53,090 --> 00:00:54,640
your device.

13
00:00:54,650 --> 00:00:58,580
Also since devices used MAC address to identify each other.

14
00:00:58,610 --> 00:01:00,680
So for example you have some networks.

15
00:01:00,680 --> 00:01:04,340
They are only allow certain marketplaces to connect to the network.

16
00:01:04,340 --> 00:01:11,330
They use a whitelist or think they can use a blacklist and blacklist your MAC address so that you cannot

17
00:01:11,330 --> 00:01:13,460
connect to that network.

18
00:01:13,460 --> 00:01:18,560
So changing your MAC address can help either connect to the network by changing your MAC address to

19
00:01:18,560 --> 00:01:24,640
one that's in a whitelist or it could let you bypass blacklists.

20
00:01:24,710 --> 00:01:27,260
So as I said it's physical and static.

21
00:01:27,320 --> 00:01:31,370
So the only way to change the MAC address is the changes in the.

22
00:01:31,490 --> 00:01:34,100
So it's going to be changed for this session.

23
00:01:34,100 --> 00:01:36,940
Once you research your device you have to change it again.

24
00:01:37,280 --> 00:01:41,390
So to do this it's very simple we're going to use a tool called Match changer.

25
00:01:41,720 --> 00:01:48,810
So let's see how we do that so first of all to get your wife I can name just type in either Blue config

26
00:01:49,410 --> 00:01:51,510
and it will show all wireless cards you have.

27
00:01:51,510 --> 00:01:55,210
So here it Yoshiro has no wireless extensions.

28
00:01:55,270 --> 00:01:56,910
And same with L-O.

29
00:01:56,910 --> 00:01:59,660
And we can see that last year is my wireless card.

30
00:01:59,910 --> 00:02:07,110
So I'm just going to disable the wireless card so if config Landseer of down does to disable the wireless

31
00:02:07,110 --> 00:02:08,570
card.

32
00:02:08,810 --> 00:02:11,610
Now we're going to change the MAC address.

33
00:02:11,610 --> 00:02:14,720
We're going to use a tool called Mac changer.

34
00:02:14,720 --> 00:02:18,560
So always with these tools it's always a good idea to look at the help.

35
00:02:18,590 --> 00:02:26,720
So if you just go on my changer help you will see all the options that we can use with this too.

36
00:02:27,050 --> 00:02:32,270
So you can use help and version to show the version and help show to show your current Mac address.

37
00:02:34,040 --> 00:02:39,280
So that it doesn't change the vendor bytes it doesn't change the manufacturer of the MAC address.

38
00:02:39,290 --> 00:02:41,700
So in other words just try a random vendor.

39
00:02:41,750 --> 00:02:47,280
Much of the same kind is just to set a random vendor here.

40
00:02:47,330 --> 00:02:54,050
The capital P will reset to the original permanent MAC address so if you change your MAC address and

41
00:02:54,050 --> 00:03:00,350
you want to use the old one you can use p or we'll just give you a random MAC address and we'll just

42
00:03:00,350 --> 00:03:02,710
print the number and the result you can use.

43
00:03:02,790 --> 00:03:10,100
And actually it'll help you pick your MAC address so you can if there is a white list and I'll show

44
00:03:10,100 --> 00:03:12,230
you how you can see all connected devices.

45
00:03:12,230 --> 00:03:17,960
So if your target network you can see is for example three devices connected and this network only allows

46
00:03:17,960 --> 00:03:19,500
these three devices connect.

47
00:03:19,610 --> 00:03:25,270
So you can just take one of those MAC addresses and change it and use it yourself and then try to connect

48
00:03:25,310 --> 00:03:27,420
and it'll allow you to connect.

49
00:03:27,440 --> 00:03:28,980
So that's how we change the MAC address.

50
00:03:28,990 --> 00:03:37,130
We're going to use my changer again and I'm just going to use random to set up a random MAC address

51
00:03:37,790 --> 00:03:40,520
and then we'll put the device name which is land zero.

52
00:03:40,790 --> 00:03:47,030
So for example my kid my changer random Landseer up you can use the app to specify your MAC address

53
00:03:47,030 --> 00:03:48,280
if you want.

54
00:03:48,290 --> 00:03:56,470
So I'm going to hit enter and as you can see my original one was this and it's been changed to 9 8 8

55
00:03:56,470 --> 00:03:59,080
4 0 9 5 s.a.a 3.

56
00:03:59,470 --> 00:03:59,950
OK.

57
00:04:00,010 --> 00:04:03,670
So now our wireless cards is ready and we've changed its MAC address.

58
00:04:03,670 --> 00:04:10,270
Now we need to enable it again because we disable that by typing config last zero down.

59
00:04:10,270 --> 00:04:11,680
So we'll do the opposite.

60
00:04:11,680 --> 00:04:16,950
Will we do something like 0 up and that's it.

61
00:04:16,950 --> 00:04:20,270
The card is enabled and its MAC address has been changed.

62
00:04:20,270 --> 00:04:21,700
Let's just have a look on it.

63
00:04:21,810 --> 00:04:24,420
If you type in ifconfig line 0.

64
00:04:24,810 --> 00:04:27,970
Now we can see the new MAC address shown up in here.

