1
00:00:01,200 --> 00:00:06,690
Now let me show you how to connect to a hidden network because the process is a bit different than connecting

2
00:00:06,690 --> 00:00:08,090
to a normal network.

3
00:00:08,100 --> 00:00:13,460
The main thing is since I was use an aero dump Angie I put my wireless card in monitor mode.

4
00:00:13,740 --> 00:00:19,410
So if I go and try to connect nothing is going to happen and I won't even be able to discover networks

5
00:00:19,410 --> 00:00:25,440
because as we said before you can't connect to networks when you're in monitor mode monitor mode is

6
00:00:25,440 --> 00:00:33,180
only used if we wanted to capture packets that are not even sent to us so it can't associate with one

7
00:00:33,180 --> 00:00:41,290
specific network so to connect to a network you need to be in managed mode which is the default mode.

8
00:00:41,410 --> 00:00:46,200
So you can put your card back in managed mode by do an airman and you stop

9
00:00:50,180 --> 00:00:55,460
and then you put the wireless card name so if you started it using the first method or the third method

10
00:00:55,610 --> 00:01:04,070
you're going to do Lanz your Amon or in my case I started to monitor mode use in the second method.

11
00:01:04,220 --> 00:01:11,240
So I'm going to have to do either Blue config 1 0 mode managed

12
00:01:14,020 --> 00:01:19,530
of course and both of these cases you have to bring the card down do that and then bring the card up.

13
00:01:21,360 --> 00:01:26,850
Now an easier way to do this and just to avoid all confusion regardless of the way that you enabled

14
00:01:26,860 --> 00:01:30,190
monitor mode all you have to do is just disconnect the card.

15
00:01:30,240 --> 00:01:36,430
So that's what I'm going to do physically disconnect my wireless card and very connected back.

16
00:01:36,470 --> 00:01:42,280
Now when you do this if I do ifconfig you won't even see the wireless card in here.

17
00:01:42,400 --> 00:01:48,710
So we have to go back to the devices menu USP and attach the wireless card.

18
00:01:48,710 --> 00:01:51,500
And for me it's called Atheros right here.

19
00:01:51,500 --> 00:01:54,790
So if I do that that's going to connect my card again.

20
00:01:54,950 --> 00:02:04,550
So if I do have config you'll see that I have my LAN 0 and if I do either Blue config you'll see that

21
00:02:04,550 --> 00:02:07,640
my line zero is back into managed mode.

22
00:02:08,060 --> 00:02:14,120
So it's in the default mode and I can use it to connect to networks now to connect to the network we're

23
00:02:14,120 --> 00:02:17,150
going to go to settings.

24
00:02:17,150 --> 00:02:24,060
I'm going to click on all applications and I'm going to go to settings and I'm going to go on network.

25
00:02:24,400 --> 00:02:30,280
Now if you actually if you enabled monitor mode using the third method if you go on networks you won't

26
00:02:30,280 --> 00:02:31,150
see anything again.

27
00:02:31,150 --> 00:02:33,950
It's going to say that your network manager is off.

28
00:02:33,970 --> 00:02:36,290
So if it looks like this that's fine.

29
00:02:36,370 --> 00:02:42,210
If it doesn't look like this then go back to your terminal and run or start the network manager again.

30
00:02:42,220 --> 00:02:47,540
Because when you do Ehrmann energy check kill that kills the network manager.

31
00:02:47,590 --> 00:02:51,650
So just do a service network manager

32
00:02:54,900 --> 00:02:58,570
and that will start the network manager for you come back here.

33
00:02:58,620 --> 00:02:59,980
It should look like this.

34
00:03:00,030 --> 00:03:02,820
And if it's looking like this then everything is perfect.

35
00:03:03,060 --> 00:03:08,220
Now since we want to connect to a hidden network you want see the network that you want to connect in

36
00:03:08,220 --> 00:03:11,650
here so you can see that I don't have my target network in here.

37
00:03:13,390 --> 00:03:20,620
So I'm going to go on Connect to a hidden network and then it's going to ask me for the network name.

38
00:03:20,620 --> 00:03:22,960
So I'm going to put test a.p like we see in

39
00:03:27,720 --> 00:03:34,800
Cousin here if we go back to the result of error don't Pendu you'll see that the name of the network

40
00:03:34,800 --> 00:03:41,180
was test AP then it's going to ask me to put the security of the network.

41
00:03:41,180 --> 00:03:47,540
So again if the network is used in WEP or WPA or WPA too then you can specify it from here.

42
00:03:47,540 --> 00:03:54,260
In my case it's not used in anything so it's hard to non-SS I'm just going to connect and as you can

43
00:03:54,260 --> 00:03:56,520
see I managed to connect to the network.

44
00:03:56,780 --> 00:04:00,350
If we go on the settings now this network actually does not have internet connection.

45
00:04:00,350 --> 00:04:02,940
That's why there was very low data going in.

46
00:04:02,990 --> 00:04:05,730
But as you can see I'm connected to the network.

47
00:04:05,810 --> 00:04:07,570
I have a good signal strength.

48
00:04:07,610 --> 00:04:14,560
I've got an IP address and I have the IP address of the default gateway and I can do anything I want

49
00:04:14,570 --> 00:04:18,190
now on the network because I'm fully connected to it.

50
00:04:19,550 --> 00:04:24,950
So when it comes to connect into a network you need to keep in mind that your wireless card has to be

51
00:04:24,950 --> 00:04:27,290
in managed mode not in monitor mode.

52
00:04:27,320 --> 00:04:29,440
There is a number of ways to do that.

53
00:04:29,450 --> 00:04:35,830
The easiest one is just to physically disconnect the card connect it back and then look for the networks.

54
00:04:35,870 --> 00:04:41,570
If you go and look for networks and it tells you that the network manager is down if it's off then all

55
00:04:41,570 --> 00:04:47,780
you have to do is just run Service Network Manager start and that'll start the network manager for you.

56
00:04:47,780 --> 00:04:53,360
Then you can come back connect to a hidden network put the network name and then you'll be able to connect

57
00:04:54,440 --> 00:05:00,500
as I said hidden networks can make a major obstacle because if the network is open you want to be able

58
00:05:00,500 --> 00:05:05,540
to connect if the network is using a password then you can't even start doing the attacks that we're

59
00:05:05,540 --> 00:05:08,870
going to talk about until you know the name of the network.

60
00:05:08,870 --> 00:05:12,560
So your first step is always you need to know the name of the network.

