1
00:00:00,510 --> 00:00:08,370
So cracking WPA or WPA to encrypted networks it's not simple especially that all the Pakistan are sent

2
00:00:08,370 --> 00:00:14,460
into the air are not useful for us as they do not contain any information that can help us determine

3
00:00:14,700 --> 00:00:17,040
the WPA key.

4
00:00:17,040 --> 00:00:23,640
Before we get into cracking WPA and WPA too there is a feature called WPX.

5
00:00:23,660 --> 00:00:29,390
It allows users and clients to connect to the network by a push of a button.

6
00:00:29,550 --> 00:00:36,780
So on Windows 8 if you look on so my wife my printers they have a W.P. as a button.

7
00:00:36,900 --> 00:00:43,800
So if you priced out the Spartan and you go to your router and personally WPX button there as well or

8
00:00:43,800 --> 00:00:51,900
go to the configuration page and press the spot on the client the printer or your windows device will

9
00:00:51,900 --> 00:00:55,220
connect to the network without having to enter the key.

10
00:00:55,380 --> 00:01:02,310
So the purpose of using WPA is it's a feature that allows clients to connect to the network easily without

11
00:01:02,310 --> 00:01:05,280
having to enter the WPA key manually.

12
00:01:05,280 --> 00:01:07,680
So it's just a feature in routers.

13
00:01:08,040 --> 00:01:14,230
This feature works and authenticates the client base using an eight digit PIN.

14
00:01:14,310 --> 00:01:17,540
So it doesn't use the actual WPA key.

15
00:01:17,580 --> 00:01:19,790
It uses an eight digit PIN.

16
00:01:19,830 --> 00:01:23,110
This is the only digits and it's only 8 bits long.

17
00:01:23,250 --> 00:01:27,190
So there isn't too many possibilities for this.

18
00:01:27,190 --> 00:01:31,870
And if we use a brute force attack we are guaranteed to get this pin.

19
00:01:32,310 --> 00:01:39,480
If we successfully get this plan then we can use a tool called River which would calculate the WPA key

20
00:01:39,660 --> 00:01:40,670
from this pen.

21
00:01:40,710 --> 00:01:46,470
So we're going to brute force the pin the digits on and that because it's only 8 digits we're guaranteed

22
00:01:46,470 --> 00:01:48,680
to be able to brute force it successfully.

23
00:01:48,840 --> 00:01:53,840
Once we do that we can calculate the WPA key use the river.

24
00:01:54,330 --> 00:01:57,110
Again this is only a feature in routers.

25
00:01:57,150 --> 00:02:01,080
This flaw is not in WPA or WPA to encryption.

26
00:02:01,080 --> 00:02:04,750
The problem is and the WPX feature.

27
00:02:04,770 --> 00:02:06,310
So let's see how we do this.

28
00:02:06,310 --> 00:02:11,980
First to look for access points that have WPX enabled.

29
00:02:12,090 --> 00:02:14,240
We're going to use a tool called wash.

30
00:02:14,400 --> 00:02:17,690
So I'm just going to put wash 1 0

31
00:02:21,030 --> 00:02:24,630
so we have our test a.p shown up here.

32
00:02:24,630 --> 00:02:27,430
That's the AP that we're going to use to crack.

33
00:02:27,600 --> 00:02:30,020
So this is actually running on WPA.

34
00:02:30,020 --> 00:02:33,390
Now it's not used in wet as we saw in the previous videos.

35
00:02:33,390 --> 00:02:36,870
I can confirm that for you here and we are just going to use arundo.

36
00:02:36,930 --> 00:02:38,490
This step is not important.

37
00:02:38,490 --> 00:02:44,820
I'm just going to use it to show you that test AP is actually used in the encryption.

38
00:02:44,820 --> 00:02:46,720
It's not easy.

39
00:02:46,800 --> 00:02:50,950
So as you can see here first is used in WPA encryption.

40
00:02:51,540 --> 00:02:52,520
Let's just go back.

41
00:02:52,650 --> 00:02:59,380
So these are the access points that have WPX enabled to have the Deputy PM feature enabled.

42
00:02:59,640 --> 00:03:05,190
And we can see the channel the RSS which is the distance between us and the access point.

43
00:03:05,400 --> 00:03:09,850
The WPX version and the WPA slug's.

44
00:03:09,890 --> 00:03:17,530
Now some routers when you try to brute force the WPA Espen they lock after a few failed attempts.

45
00:03:17,550 --> 00:03:23,550
So if you try for example for wrong pins they're going to lock and not accept any plans for a certain

46
00:03:23,550 --> 00:03:24,470
amount of time.

47
00:03:24,660 --> 00:03:30,930
So if the WPX law says yes here then you can't actually use this attack now so you need to wait for

48
00:03:30,930 --> 00:03:34,710
a little bit and come back to this access point.

49
00:03:34,770 --> 00:03:42,440
So to go on Schriever Now river is going to brute force BWP Espin and once it's able to find the WPI

50
00:03:42,440 --> 00:03:49,770
spin it's going to work out the WPA key ruber support to pause and resume.

51
00:03:49,770 --> 00:03:56,970
So if you reach if you for example brute force 30 percent of the possibilities and cancel the attack

52
00:03:57,240 --> 00:04:00,330
if you come back you've got to start again from 30000.

53
00:04:00,390 --> 00:04:02,350
You're not going to start from zero.

54
00:04:02,490 --> 00:04:09,290
So let's launch reverse we're going to put B to choose to be this idea or the Mac address of the target

55
00:04:09,290 --> 00:04:09,940
access point

56
00:04:12,830 --> 00:04:23,210
and then see to choose the channel which is 11 and then I choose the Wi-Fi card with my Intel mode and

57
00:04:23,210 --> 00:04:24,110
that's 1 0.

58
00:04:24,110 --> 00:04:30,220
So very simple reverse access point B as is the channel.

59
00:04:30,500 --> 00:04:39,860
And then the wife I had with my timeout atom and not ever associated with the target or sprint it tried

60
00:04:40,460 --> 00:04:42,440
to determine the WPA Spen.

61
00:04:42,440 --> 00:04:46,040
Now I have an easy pin which is 1 2 3 4 5 6 7 0.

62
00:04:46,280 --> 00:04:50,410
And from that it was able to calculate my WPA key.

63
00:04:50,450 --> 00:04:54,610
So that's WPA key you or you or them when you as X or.

64
00:04:55,040 --> 00:04:57,250
And that's just the name of the access point.

65
00:04:57,290 --> 00:05:04,430
So I can just come now and connect to my network and I put the key that we just found

66
00:05:08,030 --> 00:05:15,470
then I show the password is you a you or the X or next.

67
00:05:15,650 --> 00:05:19,480
As you can see we connected successfully to the network.

68
00:05:19,490 --> 00:05:22,670
Now there's a few options that I'd like to show you for either.

69
00:05:22,670 --> 00:05:29,890
I'm just going to go river help and that's all the options that you can use with reverb.

70
00:05:30,310 --> 00:05:36,080
So as I said some routers would look after a few failed attempts.

71
00:05:36,250 --> 00:05:42,100
Therefore you can use some of these other advanced options to make Kleber to get three more to work

72
00:05:42,160 --> 00:05:44,190
against these access points.

73
00:05:44,200 --> 00:05:51,340
For example you can use the delay option and specify the amount of time in seconds that reverse should

74
00:05:51,340 --> 00:05:55,590
wait between each brute force attempt or each pin attempt.

75
00:05:55,630 --> 00:05:59,400
You can also use the lock delay to tell revert to wait.

76
00:05:59,400 --> 00:06:06,580
For example 60 seconds after if the if the access points gets locked then wait for 60 seconds and then

77
00:06:06,580 --> 00:06:10,310
continue your brute force attempt.

78
00:06:10,360 --> 00:06:14,800
You can use the full weight as well to set the time that you should wait.

79
00:06:14,800 --> 00:06:23,590
After 10 failed attempts you can use the the option to revert to sleep after a certain amount just sleep

80
00:06:23,590 --> 00:06:27,800
for a certain amount of seconds after a certain number of tries.

81
00:06:28,060 --> 00:06:30,110
You can set up the timeout.

82
00:06:30,340 --> 00:06:36,360
You can play with these options the delay options and the time out the fairways and all that.

83
00:06:36,460 --> 00:06:41,660
If the access point was locking or was ignoring some of your brute force attempts.

