1
00:00:00,760 --> 00:00:07,720
So to cracka WPA key the first thing we're going to need is to capture the handshake capture and we're

2
00:00:07,720 --> 00:00:09,040
going to capture the handshake.

3
00:00:09,040 --> 00:00:09,700
Use an arrow.

4
00:00:09,700 --> 00:00:15,880
Don't be angry the same way that we used to use it with the E.P. encrypted networks.

5
00:00:16,120 --> 00:00:20,790
So we're going to run aero Dom.

6
00:00:20,940 --> 00:00:26,230
I'm just going to run it on everything now to get the information about my target network.

7
00:00:26,370 --> 00:00:28,000
And this is my target.

8
00:00:28,150 --> 00:00:29,710
So it's arrowed home.

9
00:00:29,870 --> 00:00:37,520
Angie VSS IDs the same way we used to write against WPP networks at the end of the day we're only capture

10
00:00:37,520 --> 00:00:39,510
on packets using aira don't.

11
00:00:39,510 --> 00:00:42,360
And so it's you doing the same job.

12
00:00:42,600 --> 00:00:49,500
So I'm going to put the channel as well and then I'm going to write to a file and then I'm going to

13
00:00:49,500 --> 00:00:50,340
call the file

14
00:00:53,690 --> 00:00:58,190
handshake and then I'm going to put the wireless card with monitor mode.

15
00:00:58,330 --> 00:01:04,190
So it's the same command we used to use when we were capturing packets for the IP networks error dump

16
00:01:04,260 --> 00:01:04,850
Angie.

17
00:01:05,040 --> 00:01:05,840
Yes I do.

18
00:01:05,860 --> 00:01:10,070
What's the target access point channel for that channel.

19
00:01:10,180 --> 00:01:10,600
Right.

20
00:01:10,600 --> 00:01:13,590
We put the name of the file that we're going to store stuff in.

21
00:01:13,930 --> 00:01:19,810
And one zero is our Wi-Fi card with monitor mode going to enter.

22
00:01:20,470 --> 00:01:21,480
And here we go.

23
00:01:21,850 --> 00:01:28,480
So we have our network now this is a WPA encrypted network and we have here a client connected to this

24
00:01:28,480 --> 00:01:29,740
network.

25
00:01:29,740 --> 00:01:36,490
So to capture the handshake again we said the handshake packets get sent every time a device connects

26
00:01:36,490 --> 00:01:38,070
to the target access point.

27
00:01:38,900 --> 00:01:43,820
So now we can just sit down and wait for a device to connect to the network.

28
00:01:44,650 --> 00:01:50,390
Once the device connects to the network we're going to capture the handshake or we can use something

29
00:01:50,390 --> 00:01:56,800
that we learned in section 1 which is the authentication attack in the authentication attack.

30
00:01:56,810 --> 00:02:03,890
We were able to disassociate or disconnect any device from any network that is within our Wi-Fi range.

31
00:02:04,190 --> 00:02:10,550
If we do that for a very short period of time we can disassociate this device from the network for one

32
00:02:10,550 --> 00:02:17,120
second and then the device is going to try to connect back the network automatically so that even the

33
00:02:17,130 --> 00:02:22,610
targets the person who's using the target device is not going to notice that part his device will actually

34
00:02:22,610 --> 00:02:27,160
get disconnected and reconnected so quick that he won't notice it.

35
00:02:27,290 --> 00:02:30,890
Well we will be able to capture the handshake packets.

36
00:02:31,130 --> 00:02:36,710
So again we said we actually get sent every time a device connects to the target network.

37
00:02:36,710 --> 00:02:41,480
So we're going to do is we're going to do the authentication attack the same way we did it in Section

38
00:02:41,480 --> 00:02:42,300
1.

39
00:02:42,320 --> 00:02:48,320
We're going to disconnect this device from the network for a very short period of time so that his his

40
00:02:48,350 --> 00:02:53,900
system will reconnect him straight away without him noticing that but we will be able to capture the

41
00:02:53,900 --> 00:02:55,330
handshake.

42
00:02:55,430 --> 00:02:59,480
So we're going to just run a basically off attack using airplanes.

43
00:03:03,040 --> 00:03:08,970
Do we explain this in Section 1 and in section 1 we put a very large number of our kids when we were

44
00:03:08,970 --> 00:03:10,630
disconnected our target.

45
00:03:10,650 --> 00:03:14,620
Now I'm only going to put a small number only for the authentication packets.

46
00:03:15,000 --> 00:03:23,470
Then we're going to put a MAC address of the target access point and then I'm going to put C to specify

47
00:03:23,470 --> 00:03:29,470
the client MAC address the MAC address of the client that we want to disconnect and then I'm going to

48
00:03:29,480 --> 00:03:32,560
put my wife code name which is zero.

49
00:03:33,010 --> 00:03:41,440
So airplay ngi off the tag for the authentication packets to this access point and disconnect this device

50
00:03:41,440 --> 00:03:42,340
from it.

51
00:03:42,340 --> 00:03:51,750
Now I'm going to enter and just have it's all misty you here.

52
00:03:51,980 --> 00:03:59,900
As you can see we captured the WPA handshake here and metallic device was this by the way didn't even

53
00:03:59,900 --> 00:04:00,680
change in here.

54
00:04:00,690 --> 00:04:05,300
Didn't tell me I was disconnected because it will show a message when I get disconnected.

55
00:04:05,540 --> 00:04:10,580
So I didn't get any messages to be disconnected because I was disconnected for a very short period of

56
00:04:10,580 --> 00:04:11,330
time.

57
00:04:11,540 --> 00:04:15,180
And as a result the target person didn't even notice it.

58
00:04:15,650 --> 00:04:17,540
And we were able to capture the handshake.

59
00:04:17,540 --> 00:04:21,650
As you can see here WPA a handshake from this device.

60
00:04:21,770 --> 00:04:28,850
Now we can use a wordlist and run it against this handshake to try and determine the main WPA key.

