1
00:00:01,180 --> 00:00:03,460
Welcome to part six of this module

2
00:00:06,130 --> 00:00:13,090
now let's go ahead and take a look at Zen map Zen map is the official in map security scanner graphic

3
00:00:13,090 --> 00:00:20,410
user interface it's multi-platform just like in map which means that you can use it on Linux Mac OS

4
00:00:20,410 --> 00:00:28,450
and even Windows it's a free and open source application and its goal is to make and map a little easier

5
00:00:28,450 --> 00:00:29,760
for beginners.

6
00:00:29,830 --> 00:00:37,360
It also provides a few advanced features for and map users frequently use scans can be saved as profiles

7
00:00:37,390 --> 00:00:43,450
which make them easier to run repeatedly and a command creator allows interactive creation of and map

8
00:00:43,450 --> 00:00:46,360
command lines within the tool itself.

9
00:00:46,360 --> 00:00:52,630
Scan results can be saved and viewed later and scan results can also be compared with one another to

10
00:00:52,630 --> 00:00:54,280
see how they differ.

11
00:00:54,730 --> 00:01:01,510
All the results of recent scans are stored in a searchable database so all in all it's a pretty convenient

12
00:01:01,510 --> 00:01:02,020
tool

13
00:01:04,950 --> 00:01:11,880
Zen map comes prepackaged with Kelly Linux 2.0 or it can be downloaded from the end map.

14
00:01:11,880 --> 00:01:14,540
Dot org web page.

15
00:01:14,640 --> 00:01:16,740
So before I begin I have to give.

16
00:01:16,980 --> 00:01:25,740
I'm afraid the same tiresome admonition that I've given in previous modules and map is by its nature

17
00:01:27,070 --> 00:01:33,940
an aggressive scanner unless you take special steps to make the scans passive which means that I have

18
00:01:33,940 --> 00:01:41,470
to remind you to only scan networks that you personally own or have written permission from the owner

19
00:01:41,470 --> 00:01:42,640
to scan.

20
00:01:42,640 --> 00:01:46,380
Otherwise you could be doing something illegal in this tutorial.

21
00:01:46,390 --> 00:01:52,840
One of my targets will be scan me Dot and map dot org and as you can see on the web page written permission

22
00:01:52,840 --> 00:01:55,780
has been given to conduct these scans.

23
00:01:55,780 --> 00:02:03,340
They also ask that you don't use brute forcing or cracking tools on this site or conduct excessive scans

24
00:02:03,740 --> 00:02:05,650
and provided you follow these guidelines.

25
00:02:05,650 --> 00:02:14,680
You may also use this site as a test of your end map or zone map utilities for as long as this permission

26
00:02:14,680 --> 00:02:15,270
lasts.

27
00:02:15,280 --> 00:02:20,550
But please always check and make sure that the permission is still being extended.

28
00:02:20,560 --> 00:02:27,010
All right so with that necessary admonition out of the way I'm going to call ups and map.

29
00:02:27,010 --> 00:02:30,710
I'm going to minimize this to loads and map.

30
00:02:30,780 --> 00:02:32,800
It's just like any map we're going to go to.

31
00:02:32,800 --> 00:02:33,850
Applications

32
00:02:36,570 --> 00:02:43,600
information gathering and we will and we will click the Zen map.

33
00:02:43,620 --> 00:02:50,370
You can also load this from the terminal window by typing Zen map now before we begin.

34
00:02:50,480 --> 00:03:00,620
I do have to say that when I create these modules I do my best to make each one a standalone video so

35
00:03:00,620 --> 00:03:07,680
that you can learn everything there is to know about an application simply by viewing the module that

36
00:03:07,680 --> 00:03:09,490
pertains to it.

37
00:03:09,510 --> 00:03:15,210
However in this case Zen map is literally just an map.

38
00:03:15,210 --> 00:03:23,400
So in the previous module which deals with any map I go over all of the specific particulars of how

39
00:03:23,430 --> 00:03:28,560
each different command and option within and map works.

40
00:03:28,560 --> 00:03:37,320
And it would be extremely redundant to go over all of that ground again when speaking about zen map.

41
00:03:37,350 --> 00:03:43,110
So for that reason if you haven't watched the map tutorial I strongly encourage you to do so before

42
00:03:43,110 --> 00:03:47,150
proceeding with this introduction to Zen map.

43
00:03:47,190 --> 00:03:49,260
However it's not absolutely necessary.

44
00:03:49,260 --> 00:03:55,470
You can get the gist of how this program works just based on what I'm going to show you but even so

45
00:03:55,470 --> 00:04:00,780
for the finer points you will want to see the prior module.

46
00:04:01,040 --> 00:04:09,350
So with that in mind we're going to take a look at this and as you can see this is very similar to other

47
00:04:09,350 --> 00:04:13,340
applications you may have seen already such as Sparta.

48
00:04:13,340 --> 00:04:22,230
We have our command line here which is exactly like the terminal window command for and map in this

49
00:04:22,230 --> 00:04:22,640
case.

50
00:04:22,650 --> 00:04:29,130
If you watch the prior module you will know that if we ran this in the terminal window it would have

51
00:04:29,160 --> 00:04:40,920
a timing set to 4 which is the second fastest the dash a or tack a means that it will conduct an aggressive

52
00:04:40,920 --> 00:04:50,060
scan which z map calls it intense scan but it is the same thing and TAC V would stand for verbose now

53
00:04:50,060 --> 00:05:02,770
our target to start out with is going to be scan me Dot and map dot org and as far as our profile we

54
00:05:02,770 --> 00:05:05,830
have many options for the drag down menu.

55
00:05:05,830 --> 00:05:13,560
The intense scan is the default option selected when you first loads and map we could do an intense

56
00:05:13,560 --> 00:05:16,350
scan and include UDP ports.

57
00:05:16,410 --> 00:05:24,060
If we select this notice that the command line has actually changed to include this option

58
00:05:26,860 --> 00:05:29,170
if we wish to do a quick scan instead

59
00:05:31,990 --> 00:05:37,150
we're presented with TAC F instead and those prior options are removed.

60
00:05:37,150 --> 00:05:42,790
Now bear in mind that if you know what you're doing and if you watch the previous module hopefully you

61
00:05:42,790 --> 00:05:43,430
do.

62
00:05:43,600 --> 00:05:50,050
You can manually change these commands in the command line to anything you want which you will see me

63
00:05:50,050 --> 00:05:52,780
do before this tutorial is over

64
00:05:56,810 --> 00:06:04,970
in fact I think I'm going to do that right now going to change T4 to t five the fastest scan.

65
00:06:04,960 --> 00:06:12,220
It's also the loudest but I'm scanning myself so it really doesn't matter and I am going to make my

66
00:06:12,220 --> 00:06:13,990
first target.

67
00:06:14,180 --> 00:06:17,230
The Met exploited all virtual machine I have running.

68
00:06:17,440 --> 00:06:23,260
And the reason for this is I would like to show off the topology and I've noticed that with multiple

69
00:06:23,260 --> 00:06:27,100
different scans sometimes the topology does not update correctly.

70
00:06:27,880 --> 00:06:37,900
So with that in mind let's select intense scan and we will scan all TCB ports.

71
00:06:38,040 --> 00:06:39,330
So this is an aggressive scanner.

72
00:06:39,360 --> 00:06:40,910
Change the timing again.

73
00:06:41,060 --> 00:06:48,990
OK change that back to five five is the fastest and sure this is good.

74
00:06:48,990 --> 00:06:53,060
They really need the ping in there but we'll go ahead with it and we will click scan

75
00:06:56,350 --> 00:07:02,980
and as you can see there is a small little bar over here that indicates the scan is taking place.

76
00:07:03,000 --> 00:07:04,470
This is an aggressive scan.

77
00:07:04,500 --> 00:07:09,490
So it's going to check for absolutely everything.

78
00:07:09,710 --> 00:07:17,610
We didn't expressly select any scripts but we could do that in the command line if we chose.

79
00:07:17,610 --> 00:07:22,140
Or we could go with whatever defaults come with the preloaded profiles for us and map

80
00:07:27,310 --> 00:07:29,010
information is being gathered.

81
00:07:29,020 --> 00:07:35,050
I'm going to make a small cut to the video at this point and resume recording after this is complete

82
00:07:35,080 --> 00:07:38,830
as it will probably take several minutes.

83
00:07:39,230 --> 00:07:41,500
And here we can see that the scan is complete.

84
00:07:41,510 --> 00:07:46,640
The bar has stopped flashing so scroll down and take a look

85
00:07:53,070 --> 00:07:58,140
as you can see by the readout it'll give you a step by step report along the way.

86
00:07:58,140 --> 00:08:04,440
In this case it's telling us that the Syn stealth scan was about forty six point seven two percent done

87
00:08:04,470 --> 00:08:11,840
at that point in time and it gave an estimated time to completion of five minutes and forty seven seconds

88
00:08:19,180 --> 00:08:23,710
several NSC scripts were initiated whatever was default for that part of the profile

89
00:08:27,220 --> 00:08:29,020
and now if we come all the way down

90
00:08:35,620 --> 00:08:36,970
we can see the full readout

91
00:08:44,890 --> 00:08:52,700
and we can see in multiple places that it is a Metis Floyd ABL machine using a Linux kernel OS detection

92
00:08:52,700 --> 00:08:53,690
puts it at Linux.

93
00:08:53,690 --> 00:08:58,750
Two point six nine two point six point nine excuse me.

94
00:08:58,900 --> 00:09:04,300
It takes guesses about its uptime its network distance which of course in this case is only one hop

95
00:09:05,830 --> 00:09:06,660
and so forth.

96
00:09:06,670 --> 00:09:13,720
And if we come over here to ports and hosts we can see everything that is currently open on the target.

97
00:09:13,720 --> 00:09:20,800
Now since this was just a generic aggressive scan with really very little specifications we're not going

98
00:09:20,800 --> 00:09:22,810
to see UDP ports.

99
00:09:22,810 --> 00:09:27,400
We would have had to have specified that in the scan line or in the command line.

100
00:09:27,400 --> 00:09:28,700
Excuse me.

101
00:09:28,750 --> 00:09:38,030
So what we're going to see here is open and closed ports but that is the limit only opening closed for

102
00:09:38,030 --> 00:09:39,650
TCE.

103
00:09:39,890 --> 00:09:42,460
It's coming over to the topology tab.

104
00:09:42,530 --> 00:09:46,940
It's quite small because obviously this is a virtual machine that we're scanning.

105
00:09:47,510 --> 00:09:55,190
However if you were scanning a remote network from a distance you would essentially see a network map

106
00:09:55,250 --> 00:09:57,800
of ever growing circles.

107
00:09:58,040 --> 00:10:00,830
And each hop would be demonstrated along the map

108
00:10:08,140 --> 00:10:14,770
and this is not something I can demonstrate when we go up against scan me dawg because unfortunately

109
00:10:14,770 --> 00:10:20,470
this that would reveal my office IP address which wouldn't be prudent.

110
00:10:20,470 --> 00:10:27,430
But when you try this yourself you will see the map in all its glory it tends to be quite large and

111
00:10:27,430 --> 00:10:34,540
will demonstrate all of the hops between you and your target and here we can see host details

112
00:10:38,130 --> 00:10:44,460
things like number of ports open the operating system the accuracy of the Guess which in this case is

113
00:10:44,460 --> 00:10:51,970
100 percent ports used did it did detect a closed UDP port.

114
00:10:51,970 --> 00:10:52,870
That's interesting

115
00:10:55,880 --> 00:10:57,130
most cases

116
00:11:00,350 --> 00:11:07,430
and so forth and you have the opportunity to add comments to this profile over here.

117
00:11:07,720 --> 00:11:13,440
Remember that as you're using z map you can generate a lot of different targets.

118
00:11:13,450 --> 00:11:17,890
So keeping keeping careful comments is a wise policy

119
00:11:24,760 --> 00:11:27,130
and this is just the services tab.

120
00:11:27,130 --> 00:11:35,870
And if we click on this and then let's say each TTP it will narrow down the results to open each TTP

121
00:11:37,230 --> 00:11:39,420
ports on our target.

122
00:11:39,480 --> 00:11:49,140
So it's just another way of looking at the data.

123
00:11:49,190 --> 00:11:54,920
So now we're going to go ahead and do scan me dawg.

124
00:11:55,220 --> 00:12:03,380
And the reason that I want to show both of these is I want to illustrate how easy it is to toggle between

125
00:12:03,830 --> 00:12:15,070
multiple target data using z map so paste and we're going to make this a quick scan actually we'll go

126
00:12:15,070 --> 00:12:21,990
ahead and make it a an intense scan but we're not going to do UDP that would be a very very long process

127
00:12:23,260 --> 00:12:27,160
and we're going to switch this to five

128
00:12:30,710 --> 00:12:32,290
everything else is in order.

129
00:12:32,420 --> 00:12:33,860
So I'm going to click scan.

130
00:12:38,210 --> 00:12:45,240
And once again I'm going to make it past the video at this point and resume when the scan is complete.

131
00:12:45,520 --> 00:12:45,890
All right.

132
00:12:45,890 --> 00:12:53,950
And we're back now I can't show you all of this data because if I were to scroll down my office I.P.

133
00:12:53,950 --> 00:12:59,690
address is displayed and that's the same reason I can't click on the topology button.

134
00:12:59,710 --> 00:13:07,610
However if I come over to ports and hosts we can see what is listed as available on scan meta and map

135
00:13:07,610 --> 00:13:09,310
dawg.

136
00:13:09,390 --> 00:13:17,240
And as you can see we can easily switch between scans now if you're scanning a very large network with

137
00:13:17,300 --> 00:13:20,560
a great many different targets.

138
00:13:20,580 --> 00:13:30,020
This is a very efficient way of keeping all of your scan results organized and quickly moving from one

139
00:13:30,020 --> 00:13:31,360
to another.

140
00:13:31,370 --> 00:13:38,870
So in this respect Zen map is a little bit better than the terminal version and map because of course

141
00:13:38,870 --> 00:13:45,380
with the terminal version you can save files such as an Excel file or grep BL file but she can really

142
00:13:45,380 --> 00:13:51,020
only deal with one at a time unless you want to have a lot of different scan results on your terminal

143
00:13:51,020 --> 00:13:56,480
screen and scroll up and down her have multiple different terminal windows open some people like to

144
00:13:56,480 --> 00:13:57,020
do that.

145
00:13:57,020 --> 00:14:04,310
I I know that there is a certain class of pen Tester who feels that you know if you're a pro you only

146
00:14:04,310 --> 00:14:08,120
use the terminal and you know goodies are for beginners.

147
00:14:08,120 --> 00:14:13,040
You know that kind of an attitude but as you can see this is actually very useful.

148
00:14:13,040 --> 00:14:20,570
So it's literally just an map if you watched the map module hopefully you know all the commands and

149
00:14:20,570 --> 00:14:28,430
you know the differences between say intent scan or a UDP scan or a ping scan and you also know and

150
00:14:28,490 --> 00:14:35,230
it bears mentioning again that even one map says something is passive or stealth.

151
00:14:35,480 --> 00:14:43,280
You still need to take additional steps to really and truly be anonymous and again if that is a concern

152
00:14:43,280 --> 00:14:50,660
for you please see the modules dealing with anonymity particularly the ones dealing with virtual private

153
00:14:50,660 --> 00:14:52,840
networks and proxies.

154
00:14:52,850 --> 00:14:59,510
So with that being said this has been and map I'm not really sure what else to add.

155
00:14:59,520 --> 00:15:06,510
You can of course save your scans just like with the command line version and you can quickly load them

156
00:15:06,510 --> 00:15:11,180
up again just with open scan you can also open scan in this window.

157
00:15:11,520 --> 00:15:17,220
So if you wanted to I don't know mix here you know have it all on screen at one time you could do that

158
00:15:18,230 --> 00:15:27,010
it's possible to compare results of your various scans filter hosts so we'll analyze and map is a handy

159
00:15:27,010 --> 00:15:34,360
little tool and I think one of the best things about it is that it's a good way of presenting information

160
00:15:34,900 --> 00:15:46,450
about a particular target relating to a pen test or targets to an employer or to anyone who is not shall

161
00:15:46,450 --> 00:15:51,790
we say initiated in the ways of the command line because of course when you're looking at this information

162
00:15:51,790 --> 00:15:57,370
the command line when you know what you're looking at it's very straightforward but it can be very either

163
00:15:57,370 --> 00:16:03,040
intimidating or confusing for people who are more used to this sort of a presentation.

164
00:16:03,050 --> 00:16:11,510
And and it's good if you're giving a presentation to a large organization going over the security vulnerabilities

165
00:16:11,510 --> 00:16:19,180
that you've discovered because it's something that they can look at and see and immediately understand

166
00:16:20,350 --> 00:16:23,140
so that's pretty much all I have to say about Z map.

167
00:16:23,140 --> 00:16:29,950
As I said it's a pretty straightforward tool and I hope you know enough between this module and the

168
00:16:29,950 --> 00:16:34,780
prior module on and map to be able to use it effectively and have fun with it.

169
00:16:34,900 --> 00:16:41,170
It is definitely a much beloved tool both in map and Zend map.

170
00:16:41,170 --> 00:16:47,870
Have a great deal of support in the online community.

171
00:16:48,030 --> 00:16:54,800
You can find additional scripts on GitHub that can be utilized by both end map and z map.

172
00:16:54,840 --> 00:17:01,470
Although as I mentioned in the previous module you will need to do your due diligence and only download

173
00:17:01,470 --> 00:17:05,690
from trusted sources and ensure that what you're downloading is actually what you want.

174
00:17:07,800 --> 00:17:15,950
And of course you can get more scripts off these and map and map Web site simply by updating.

175
00:17:16,050 --> 00:17:20,320
So there is that and that's pretty much all I had to cover.

176
00:17:20,330 --> 00:17:24,310
This is a great utility and I hope it will be of great use to you.

177
00:17:24,320 --> 00:17:24,680
Thank you.

