1
00:00:00,120 --> 00:00:02,690
Welcome to part four of this module.

2
00:00:02,700 --> 00:00:08,520
This video is going to focus on how to create a hidden Windows operating system using very script while

3
00:00:08,520 --> 00:00:12,060
also creating an encrypted Cally Linux installation.

4
00:00:12,060 --> 00:00:19,140
In other words when we're done we're going to have an encrypted decoy installation of Windows and encrypted

5
00:00:19,290 --> 00:00:20,980
hidden installation.

6
00:00:21,030 --> 00:00:26,520
And we're also going to have an encrypted Cally Linux installation when we built our system.

7
00:00:26,520 --> 00:00:33,300
The password that we enter is going to determine which encrypted operating system loads before we get

8
00:00:33,300 --> 00:00:33,960
started.

9
00:00:33,990 --> 00:00:38,210
I have to cover a lot of the same things that I covered in the last video.

10
00:00:38,220 --> 00:00:43,800
If you're only interested in having a hidden Windows system and you don't care about being able to dual

11
00:00:43,800 --> 00:00:48,540
boot to an encrypted Cally operating system please see the prior video.

12
00:00:48,540 --> 00:00:55,080
Although much of this procedure is going to look almost identical to everything shown in the last presentation

13
00:00:55,200 --> 00:00:59,940
certain key aspects of it are in fact very different.

14
00:00:59,940 --> 00:01:07,780
This is a very complicated setup to pull off everything shown here is done at your own risk.

15
00:01:07,800 --> 00:01:12,210
And I do strongly recommend that you try this out in virtual box first.

16
00:01:12,240 --> 00:01:17,160
The best time to do something like this is when you're first setting up your computer.

17
00:01:17,220 --> 00:01:23,850
If you're using a newer computer you may need to go into your system bios and make some changes very

18
00:01:23,850 --> 00:01:26,580
script supports you EFI boot loaders.

19
00:01:26,610 --> 00:01:31,650
But if your BIOS has a secure boot enabled you are going to need to disable that.

20
00:01:31,650 --> 00:01:37,950
Otherwise your system may not allow you to boot from USP your city ram at all unless you're booting

21
00:01:37,950 --> 00:01:41,040
a Windows system because every BIOS is different.

22
00:01:41,040 --> 00:01:44,240
I can't show this procedure for how to do this.

23
00:01:44,250 --> 00:01:50,340
So please research your BIOS version a bit before proceeding normally.

24
00:01:50,400 --> 00:01:57,360
It is as simple as toggling enabled to disabled but be aware this may require you to reinstall your

25
00:01:57,360 --> 00:01:58,830
operating systems.

26
00:01:58,830 --> 00:02:05,100
You should be fully willing to reinstall your operating systems before you begin anyway because if something

27
00:02:05,100 --> 00:02:11,850
does go wrong in this process it is quite often necessary that you reformat your hard drive and try

28
00:02:11,850 --> 00:02:12,480
again.

29
00:02:12,480 --> 00:02:18,270
So with that in mind make absolutely sure that you've backed up all of your important data on external

30
00:02:18,270 --> 00:02:18,780
media.

31
00:02:18,780 --> 00:02:23,550
Another thing that may vary from system to system is the partition configuration.

32
00:02:23,580 --> 00:02:31,110
Some computer manufacturers like to create truly bizarre partition layouts with multiple reserved partitions

33
00:02:31,110 --> 00:02:34,170
in front of the operating system and so on and so forth.

34
00:02:34,170 --> 00:02:41,700
Generally speaking these are recovery partitions and the like but they tend to gnaws up the entire process

35
00:02:41,730 --> 00:02:46,830
and may in fact compromise the security of your encrypted system for these reasons.

36
00:02:46,830 --> 00:02:50,670
You may wish to reformat and start fresh anyway.

37
00:02:50,670 --> 00:02:57,060
Finally some bios versions will give you the option of using a legacy bootloader and switching from

38
00:02:57,060 --> 00:02:59,910
GP t to MPR partitioning.

39
00:02:59,910 --> 00:03:06,860
Doing so will absolutely require a ring installation of any operating systems you have installed.

40
00:03:06,960 --> 00:03:12,360
If you run into problems though this may be your only option to make a long story short.

41
00:03:12,420 --> 00:03:17,890
Don't attempt this unless you are 100 percent comfortable with reformatting your hard drive.

42
00:03:17,940 --> 00:03:25,230
You absolutely must have all of the installation media created and on hand before we begin a Windows

43
00:03:25,230 --> 00:03:27,490
rescue disk is not adequate.

44
00:03:27,510 --> 00:03:34,290
You will need an iso image burned to either a seedy or USP for the Windows version that you wish to

45
00:03:34,290 --> 00:03:35,210
install.

46
00:03:35,280 --> 00:03:39,170
These can usually be obtained legally from the Microsoft Web site.

47
00:03:39,180 --> 00:03:46,200
You will need your Windows product key So be certain to obtain that key and verify it before you begin.

48
00:03:46,200 --> 00:03:51,850
It is also recommended that you have a boot repair disk or USP of some kind.

49
00:03:51,870 --> 00:04:00,180
On hand in case your bootloader gets goofed up if you need any help reform any computer please see the

50
00:04:00,180 --> 00:04:03,150
next video on Derek's boot and nuke.

51
00:04:03,210 --> 00:04:10,200
The demonstration shown here will work with all versions of Windows going as far back as Windows XP.

52
00:04:10,200 --> 00:04:14,430
The procedure is identical if you prefer True Crypt over Vera crypt.

53
00:04:14,430 --> 00:04:15,720
However be aware.

54
00:04:15,720 --> 00:04:22,770
True Crypt has no UTF I support so you will need to change the bootloader to legacy and recreate your

55
00:04:22,770 --> 00:04:26,370
partitions as MPR if you wish to use True Crypt.

56
00:04:26,370 --> 00:04:33,990
Last but not least you absolutely must activate your Windows operating system before you encrypted.

57
00:04:33,990 --> 00:04:39,850
This is covered in the very crypto documentation creating a hidden operating system prior to authentication

58
00:04:39,850 --> 00:04:43,910
and can compromise your security in several key ways.

59
00:04:43,920 --> 00:04:49,300
It is also recommended that you fully update before encrypting to start us off.

60
00:04:49,320 --> 00:04:57,000
We're actually going to go to the disk management system so we're going to press the Windows plus X

61
00:04:57,000 --> 00:05:00,240
key and we're going to select disk manage.

62
00:05:00,660 --> 00:05:06,090
If you watch the prior video this is the point where you'll start to notice procedural differences.

63
00:05:06,090 --> 00:05:12,510
The first thing we're going to do is we're going to create a large volume of space behind the primary

64
00:05:12,510 --> 00:05:15,030
part system partition to do this.

65
00:05:15,030 --> 00:05:17,410
We need to shrink our system volume.

66
00:05:17,460 --> 00:05:21,480
We're going to create three partitions behind the primary.

67
00:05:21,540 --> 00:05:26,160
The first one is going to contain our hidden Windows operating system.

68
00:05:26,160 --> 00:05:35,340
This partition must be at least twice the size plus 5 percent of your primary partition which will contain

69
00:05:35,340 --> 00:05:37,290
your decoy operating system.

70
00:05:37,320 --> 00:05:43,800
In other words if your decoy system partition is 50 gigabytes in size your hidden partition must be

71
00:05:43,800 --> 00:05:46,650
at least one hundred and five gigabytes in size.

72
00:05:46,650 --> 00:05:52,320
What makes this a little more complicated is that we're going to create two more partitions behind the

73
00:05:52,320 --> 00:05:53,500
hidden partition.

74
00:05:53,520 --> 00:05:59,410
One will be a beautiful partition that is going to contain our Linux grub bootloader.

75
00:05:59,490 --> 00:06:06,840
The next will be the actual operating system for our encrypted Cally Linux partition.

76
00:06:06,840 --> 00:06:13,020
There are other partition schemes that can work here and once you're practiced at doing this you can

77
00:06:13,020 --> 00:06:14,100
experiment.

78
00:06:14,100 --> 00:06:21,510
If you prefer to separate your Linux installations across partitions that is possible you wouldn't do

79
00:06:21,600 --> 00:06:28,950
do so in this window however you would do so during the installation of Cally by splitting up the system

80
00:06:28,950 --> 00:06:31,050
partition that we're creating now.

81
00:06:31,140 --> 00:06:34,760
However doing that is a little outside of the scope of this tutorial.

82
00:06:34,770 --> 00:06:38,490
We're going to keep things simple for demonstration purposes.

83
00:06:38,490 --> 00:06:44,460
So the first thing we're gonna do is we're going to right click on b c the C partition which is the

84
00:06:44,460 --> 00:06:52,200
system partition and select shrink volume and we're gonna go ahead and shrink it by about 81 gigabytes.

85
00:06:52,260 --> 00:06:57,300
In this example that will leave about 20 for the decoy operating system.

86
00:06:57,330 --> 00:07:03,120
So now we're going to right click on the unallocated space and we're going to select new simple volume

87
00:07:03,660 --> 00:07:05,880
of the amount of space available.

88
00:07:05,970 --> 00:07:13,650
We're going to go ahead and assign it 41000 megabytes or 41 gigabytes.

89
00:07:13,650 --> 00:07:18,160
This will make it a little more than double the size the first partition.

90
00:07:18,180 --> 00:07:20,300
And remember this is a requirement.

91
00:07:20,310 --> 00:07:27,000
It will also leave us around 40 gigs or so to play with for our Linux installation.

92
00:07:27,000 --> 00:07:32,690
We'll use all of the default options here and we'll do NTSC format.

93
00:07:32,760 --> 00:07:40,000
It's up to you if you wish to assign a drive letter.

94
00:07:40,120 --> 00:07:41,950
Now we'll do the same thing again.

95
00:07:42,190 --> 00:07:46,120
We'll click on unallocated space and select new simple volume

96
00:07:49,340 --> 00:07:56,250
and we'll sign 30 nine thousand megabytes or thirty nine gigabytes.

97
00:07:56,290 --> 00:07:59,170
Again the size will vary for you.

98
00:07:59,170 --> 00:08:07,250
And don't worry about format this will leave a little over a gigabyte of free space that we're going

99
00:08:07,250 --> 00:08:08,930
to make another partition out of.

100
00:08:08,960 --> 00:08:13,820
This is going to be our boot partition that we're going to install the grub bootloader too.

101
00:08:14,000 --> 00:08:15,840
This is a little unusual.

102
00:08:15,860 --> 00:08:23,270
One thing that I want to point out is that this boot partition or any boot partitions that you create

103
00:08:23,330 --> 00:08:29,150
if you create more than one always need to be at the end of the partition scheme.

104
00:08:29,150 --> 00:08:34,160
There's a reason for this and I'll try to illustrate it as it becomes relevant during the installation

105
00:08:34,160 --> 00:08:34,760
of Kali.

106
00:08:34,760 --> 00:08:41,480
But for right now just make sure that your boot partition is at the end of the scheme and how big of

107
00:08:41,480 --> 00:08:44,480
a partition you want this to be is up to you.

108
00:08:44,540 --> 00:08:47,390
I recommend about a gigabyte.

109
00:08:47,390 --> 00:08:55,040
The reason is that while grubs certainly doesn't take up that much space it will allow you more flexibility

110
00:08:55,040 --> 00:08:59,660
for updating your bootloader later on if you so desire.

111
00:08:59,660 --> 00:09:02,920
So once again we're just going to go with the default options here.

112
00:09:02,960 --> 00:09:10,130
These don't matter because we will be given the opportunity to properly format these partitions during

113
00:09:10,130 --> 00:09:11,600
the cowling installation.

114
00:09:11,630 --> 00:09:17,810
So now we're basically done but one last thing I want to point out if you have enough disk space and

115
00:09:17,810 --> 00:09:24,040
you're so inclined it is possible to have still more encrypted operating systems.

116
00:09:24,050 --> 00:09:32,450
However you may run into some difficulties with the swap partition between different versions of Linux

117
00:09:32,510 --> 00:09:34,310
so just be aware of this.

118
00:09:34,310 --> 00:09:42,350
Also be aware that if you were to install multiple versions of Linux behind the encrypted Windows operating

119
00:09:42,350 --> 00:09:47,240
systems you would need a designated boot partition for each one.

120
00:09:47,240 --> 00:09:53,390
This is because every time we install grub it's only going to recognize the encrypted operating system

121
00:09:53,390 --> 00:09:59,210
that we are installing it for not any other encrypted operating systems that we have present.

122
00:09:59,210 --> 00:10:07,400
So for example if you wanted to have Cally and let's say a bunch too you would then have a system partition

123
00:10:07,700 --> 00:10:16,310
another system partition a boot partition for Kali and a boot partition for a to again outside of the

124
00:10:16,310 --> 00:10:17,440
scope of this tutorial.

125
00:10:17,450 --> 00:10:21,610
But I wanted to mention that it is possible so we're now done with the disk manager.

126
00:10:21,620 --> 00:10:23,290
We're gonna go ahead and close it out.

127
00:10:23,480 --> 00:10:28,040
Now things are gonna get a little tricky so we're going to open up very crypt.

128
00:10:28,040 --> 00:10:34,500
I've already done so it is vitally important that we follow these next steps in the correct order.

129
00:10:34,520 --> 00:10:38,350
Otherwise this will all turn into a huge mess.

130
00:10:38,360 --> 00:10:44,760
The first thing we're going to do is create the hidden Windows operating system using very crypt.

131
00:10:44,810 --> 00:10:48,980
Again this can be any version of Windows from XP to 10.

132
00:10:48,980 --> 00:10:54,510
Just remember your decoy system must be the exact same type of windows.

133
00:10:54,580 --> 00:11:00,890
If you're using Windows 10 professional for your hidden system then your decoy must be Windows 10 professional.

134
00:11:00,890 --> 00:11:07,430
So how this works is pretty simple and very crypt is going to encrypt the large partition we created

135
00:11:07,430 --> 00:11:14,990
behind our system partition it will then copy our current version of Windows on to that encrypted partition

136
00:11:15,110 --> 00:11:21,580
that is going to be our hidden operating system then it is going to wipe out the current partition and

137
00:11:21,590 --> 00:11:26,750
if you watch the last video then you would know that the next step would be to install Windows on the

138
00:11:26,750 --> 00:11:29,090
first partition again and encrypted.

139
00:11:29,090 --> 00:11:31,730
But that isn't quite what we're going to do here.

140
00:11:31,730 --> 00:11:36,110
Instead we're going to go ahead and we're going to create the hidden operating system.

141
00:11:36,110 --> 00:11:43,670
We will fully delete and securely wipe the first partition but before we go ahead and install our windows

142
00:11:43,670 --> 00:11:49,970
decoy operating system we're going to install the encrypted Kali Linux installation complete with its

143
00:11:49,970 --> 00:11:57,590
own beautiful partition only after that is done will we install the decoy system and encrypted confused.

144
00:11:57,590 --> 00:12:01,590
Hopefully it will all make sense by the end of the presentation to start with.

145
00:12:01,610 --> 00:12:07,370
We need to click on system and select encrypt partition drive.

146
00:12:07,370 --> 00:12:12,680
This time we're going to click the second radial button to specify that we want to create a hidden operating

147
00:12:12,680 --> 00:12:14,540
system and click next.

148
00:12:14,540 --> 00:12:16,670
Read through this warning carefully.

149
00:12:16,670 --> 00:12:19,610
It's just telling you what I've already said.

150
00:12:19,610 --> 00:12:25,610
You must be ready to install a fresh copy of Windows to the decoy operating system.

151
00:12:25,610 --> 00:12:31,880
Once the hidden system is created make sure you have all of the disks on hand and make sure that you

152
00:12:31,880 --> 00:12:38,590
have your windows product key the correct product key and all of your important files fully backed up

153
00:12:38,600 --> 00:12:40,370
before proceeding when you're ready click.

154
00:12:40,370 --> 00:12:46,550
Yes please read through this carefully and keep in mind you may encounter certain issues while using

155
00:12:46,550 --> 00:12:54,280
USP devices such as unencrypted thumb drives being read only when you're using hidden operating system.

156
00:12:54,290 --> 00:12:57,230
This is by design and yes.

157
00:12:57,410 --> 00:13:03,740
This can make things rather a pain but it isn't necessary security precaution when you're ready click

158
00:13:03,740 --> 00:13:04,820
OK.

159
00:13:04,970 --> 00:13:06,830
And yes we want to grant authority.

160
00:13:06,920 --> 00:13:10,120
Now you may or may not receive this message.

161
00:13:10,130 --> 00:13:15,320
Depending on how your windows is configured if you don't skip this next step.

162
00:13:15,380 --> 00:13:21,170
If you do what this is telling you is that there are paging files on non system partitions.

163
00:13:21,170 --> 00:13:25,370
This can adversely affect plausible deniability of the hidden operating system.

164
00:13:25,370 --> 00:13:31,790
It is therefore very strongly recommended that you click yes here which will configure windows to create

165
00:13:31,790 --> 00:13:35,780
paging files only on the windows partition from now on.

166
00:13:35,780 --> 00:13:38,870
But doing this will require a system reboot.

167
00:13:39,020 --> 00:13:46,100
So I'm going to click yes once you reboot is complete you won't receive any special prompts so go ahead

168
00:13:46,100 --> 00:13:53,980
and relaunch very script and once again we're gonna click system encrypt system partition drive hidden

169
00:13:54,280 --> 00:14:01,450
click yes click OK yes to authorize now once again if you watched the prior videos you already know

170
00:14:01,450 --> 00:14:02,850
what I think of this screen.

171
00:14:03,100 --> 00:14:07,420
I call it the screen of doom because it exists only to confuse you.

172
00:14:07,570 --> 00:14:14,680
We are setting up multiple beautiful operating systems so it would be quite reasonable for you to think

173
00:14:14,680 --> 00:14:18,970
that you're supposed to click on multi boot and you're really not.

174
00:14:18,970 --> 00:14:26,050
This screen is a holdover from true script and it really should be rewritten to be less blatantly deceptive.

175
00:14:26,050 --> 00:14:32,210
We're going to click the single boot radial button and yes I know it seems counterintuitive and we're

176
00:14:32,200 --> 00:14:38,740
going to click next this next pop up is basically telling you about two important salient points.

177
00:14:38,740 --> 00:14:45,100
First your hidden operating system won't be allowed to hibernate but your decoy system can hibernate

178
00:14:45,100 --> 00:14:46,090
normally.

179
00:14:46,420 --> 00:14:48,190
You can select no.

180
00:14:48,310 --> 00:14:54,440
At this point however removing the extra boot partition is outside of the scope of this tutorial.

181
00:14:54,760 --> 00:15:00,910
So we're going to click yes the next pop up is reminding us that for security reasons we must make sure

182
00:15:00,940 --> 00:15:06,160
the current operating system is activated and authenticated before proceeding.

183
00:15:06,160 --> 00:15:09,170
This is your last chance to do so before we begin.

184
00:15:09,160 --> 00:15:16,780
So if you haven't exit Vera crypt and do so now if you have click yes with all the preamble out of the

185
00:15:16,780 --> 00:15:20,620
way it's now time to create our outer volume.

186
00:15:20,620 --> 00:15:26,740
This should seem familiar if you've been following along but if it's new that's OK this so-called outer

187
00:15:26,740 --> 00:15:30,010
volume is going to be our decoy partition.

188
00:15:30,010 --> 00:15:37,960
In other words when we are using our decoy operating system the hidden system will appear to be a regular

189
00:15:37,960 --> 00:15:42,410
encrypted partition to make the deception convincing.

190
00:15:42,460 --> 00:15:50,060
We need to create this outer volume and will place some sensitive looking files into it in case wherever

191
00:15:50,060 --> 00:15:55,340
ever called upon to melt the partition while we're using the decoy operating system.

192
00:15:55,360 --> 00:16:02,410
So we're presented with our encryption options and these will be the encryption and hash algorithms

193
00:16:02,410 --> 00:16:09,370
that bear crypto will be using as before we have the option of using a single algorithm or a cascade

194
00:16:09,370 --> 00:16:10,360
of algorithms.

195
00:16:10,360 --> 00:16:11,840
The choice is yours.

196
00:16:11,980 --> 00:16:16,310
However I strongly recommend that you select a single algorithm.

197
00:16:16,330 --> 00:16:22,290
The reason is that using multiple algorithms is going to slow your system performance down considerably.

198
00:16:22,300 --> 00:16:28,720
If system performance is not a concern and you want maximum security by all means do as you like but

199
00:16:28,720 --> 00:16:31,900
realize that all of these are solid choices.

200
00:16:31,900 --> 00:16:38,260
The United States military itself uses advanced encryption standard to encrypt top secret data and that's

201
00:16:38,260 --> 00:16:40,780
really going to be good enough for this demonstration.

202
00:16:40,780 --> 00:16:48,820
Also keep in mind you aren't ever likely to use the outer partition for anything and in fact you really

203
00:16:48,820 --> 00:16:49,420
shouldn't.

204
00:16:49,450 --> 00:16:52,870
As you run the risk of corrupting your hidden operating system.

205
00:16:52,870 --> 00:16:56,430
As for the hash algorithm there really isn't a wrong choice here.

206
00:16:56,440 --> 00:16:59,490
You can read up on the different algorithms if you desire.

207
00:16:59,570 --> 00:17:03,450
They are all completely rock solid for this demonstration.

208
00:17:03,460 --> 00:17:05,950
I'll be using SHA 256.

209
00:17:05,980 --> 00:17:11,030
Notice that on this next screen the option to change volume size is great out.

210
00:17:11,080 --> 00:17:12,630
Just click next.

211
00:17:12,700 --> 00:17:16,190
Now we need to set the outer volume password.

212
00:17:16,210 --> 00:17:19,230
This is actually a little bit more tricky than it seems.

213
00:17:19,240 --> 00:17:25,450
You probably won't ever have a reason to use this password since in in the normal scheme of things you're

214
00:17:25,450 --> 00:17:32,680
not likely to ever access the decoy partition but you need to remember this password so that you can

215
00:17:32,740 --> 00:17:36,480
access the partition if you're ever called upon to do so.

216
00:17:36,700 --> 00:17:43,280
Yet if you make the password simple enough to be easily brute forced it won't be convincing.

217
00:17:43,390 --> 00:17:50,020
After all if you use a password less than 20 characters long why did you even bother to encrypt at all.

218
00:17:50,050 --> 00:17:53,270
Really can't give you any special advice here.

219
00:17:53,320 --> 00:17:55,670
You just have to use your best judgment.

220
00:17:55,750 --> 00:18:02,050
Pick a password can't be brute forced easily and you'll remember despite the fact that you'll probably

221
00:18:02,050 --> 00:18:04,090
never have any occasion to use it.

222
00:18:04,330 --> 00:18:10,930
I explained the key files and pin in the last few videos so I'm not going to go into great length about

223
00:18:10,930 --> 00:18:18,010
them here except to say that key files add an extra layer of security by requiring certain files to

224
00:18:18,010 --> 00:18:20,170
be present when the password is entered.

225
00:18:20,170 --> 00:18:26,770
If these files are lost or become corrupted by even a few killer bytes they will no longer function.

226
00:18:26,770 --> 00:18:29,740
So do this at your own risk.

227
00:18:29,740 --> 00:18:35,830
Also keep in mind that if you ever ordered by a legal authority to grant access to this volume and you

228
00:18:35,830 --> 00:18:41,680
find that you can't because the key files have become lost or corrupted you may be in seriously hot

229
00:18:41,680 --> 00:18:43,390
water legally speaking.

230
00:18:43,390 --> 00:18:49,990
Even if there's nothing important stored in the decoy drive for this reason I recommend against using

231
00:18:49,990 --> 00:19:00,200
key files and I further recommend that you avoid using the PMA option the choice is yours.

232
00:19:00,270 --> 00:19:07,590
Now this looks really simple and it is but it's also a little complicated very crypt is asking you if

233
00:19:07,590 --> 00:19:14,490
you want to store files larger than 4 gigabytes on your decoy partition or your outer partition that

234
00:19:14,490 --> 00:19:20,850
is to say in the prior video covering how to encrypt a USP device.

235
00:19:20,880 --> 00:19:27,870
I rather mischaracterized the selection of N T S F for the outer volume by saying that it cuts available

236
00:19:27,870 --> 00:19:29,190
space in half.

237
00:19:29,280 --> 00:19:34,180
It does but only relative to how much data you have on the drive.

238
00:19:34,200 --> 00:19:41,010
In other words what I should have said is if you save a 4 gigabyte file and you format the outer volume

239
00:19:41,010 --> 00:19:48,540
using NTSC f around 8 gigabytes worth of space is going to end up being used up or double the total

240
00:19:48,540 --> 00:19:53,010
amount of space used in the container when it was created.

241
00:19:53,010 --> 00:20:00,230
This is because n t s f likes to store stuff stored data in the middle of the file system.

242
00:20:00,240 --> 00:20:06,710
This may be a bit confusing so to cut right to the point you really want to click no here.

243
00:20:06,750 --> 00:20:15,130
If you decide to click yes and go with NTFS you'll be wasting a little bit of space and this is a random

244
00:20:15,130 --> 00:20:15,920
pool.

245
00:20:16,180 --> 00:20:21,790
As we move the mouse around within the very crypt or true crypt window the complexity of the pool will

246
00:20:21,790 --> 00:20:23,040
grow.

247
00:20:23,050 --> 00:20:29,830
This is one of the safety precautions that these pieces of software use so that you're not 100 percent

248
00:20:29,830 --> 00:20:33,890
dependent upon windows cryptographic functions.

249
00:20:34,030 --> 00:20:41,470
These functions can fail and then you can be potentially compromised either by nation state actors or

250
00:20:41,500 --> 00:20:46,100
corporations to produce a weak or predictable random pool.

251
00:20:46,120 --> 00:20:52,810
This would make it trivially easy to obtain the master key and access the volume for that reason.

252
00:20:52,810 --> 00:20:58,330
It is recommended that you waive your mouse cursor around in this window like a crazy person for as

253
00:20:58,330 --> 00:21:04,480
long as you can stand it in order to increase the cryptographic strength and the randomness of your

254
00:21:04,480 --> 00:21:07,150
encrypted container volume or partition.

255
00:21:07,150 --> 00:21:09,000
Do this for as long as you can stand it.

256
00:21:09,010 --> 00:21:14,290
The little bar at the bottom of the screen here is really just a suggestion and if you click display

257
00:21:14,290 --> 00:21:19,790
pool then the obscuring symbols will be changed to hexadecimal.

258
00:21:19,810 --> 00:21:24,240
It will also display your master and header keys when you're done.

259
00:21:24,340 --> 00:21:25,600
When you're ready click format.

260
00:21:27,200 --> 00:21:31,970
Also notice that four file system it will default to fat in most cases.

261
00:21:31,970 --> 00:21:39,350
Fat is probably your best choice for an outer volume unless you're dealing with a drive of two terabytes

262
00:21:39,350 --> 00:21:44,420
or more in which case you would need to choose e x fat or X fat

263
00:21:47,420 --> 00:21:50,130
neither the outer volume has been created.

264
00:21:50,210 --> 00:21:55,930
We have one chance and one chance only to add files to it.

265
00:21:56,090 --> 00:22:01,920
So to do this the outer volume is currently mounted at this point in the process.

266
00:22:02,240 --> 00:22:08,240
So we're gonna click the open outer volume button and it's going to open the outer volume as a partition

267
00:22:09,200 --> 00:22:16,880
and we're going to go ahead and we're gonna drag are fake secret files onto this drive.

268
00:22:16,880 --> 00:22:22,820
Now remember that these are going to be files that look like something he would want to encrypt and

269
00:22:22,820 --> 00:22:24,590
keep secret.

270
00:22:24,590 --> 00:22:31,080
But you don't actually mind if you end up having to give up your password and they do get discovered.

271
00:22:31,100 --> 00:22:34,510
So what these files are are entirely up to you.

272
00:22:34,520 --> 00:22:40,110
I went ahead and created a single file folder just to have something there to look at me.

273
00:22:40,250 --> 00:22:45,620
Come on open up this drive later you would want to make this look convincing.

274
00:22:45,620 --> 00:22:48,090
How you do that is up to you.

275
00:22:48,170 --> 00:22:56,210
You might add picture files or old records or journal entries or whatever you like.

276
00:22:56,210 --> 00:23:00,800
Remember though this is your one and only chance to add files to this drive.

277
00:23:00,830 --> 00:23:09,290
You really don't want to add anything to the drive later on after this process is finished because this

278
00:23:09,290 --> 00:23:15,170
outer volume and your hidden operating system are really occupying the same partition and there is a

279
00:23:15,170 --> 00:23:22,040
chance whenever you modify files on the outer partition without protecting it first that you can corrupt

280
00:23:22,040 --> 00:23:23,930
your hidden operating system.

281
00:23:24,080 --> 00:23:31,400
So it's strongly recommended that once you're done with this you never touch this drive again so after

282
00:23:31,400 --> 00:23:39,420
you've added whatever whatever files you wish to add close out of this and we click next.

283
00:23:39,500 --> 00:23:42,020
It's now time to create the hidden volume.

284
00:23:42,020 --> 00:23:44,870
This is going to contain our hidden operating system.

285
00:23:44,990 --> 00:23:46,100
Click Next.

286
00:23:46,180 --> 00:23:50,140
Now please pay careful attention to this warning it's very important.

287
00:23:50,150 --> 00:23:58,100
It's absolutely essential that you choose the same encryption algorithm and hash for both the hidden

288
00:23:58,190 --> 00:24:04,130
volume and the outer volume or decoy volume as it were.

289
00:24:04,130 --> 00:24:11,840
In other words if you pick a s for your hidden operating system and Sha 256 then when you install your

290
00:24:11,840 --> 00:24:21,560
decoy operating system and encrypted you need to select ATX and Sha 256 your choices must match if they

291
00:24:21,560 --> 00:24:25,800
don't match you won't be able to boot into the hidden operating system.

292
00:24:26,090 --> 00:24:32,960
So write down on a piece of paper whatever it is you choose from these options.

293
00:24:32,960 --> 00:24:40,330
Once again I'm going to go with a yes and Sha 256 when you've made your selection click next.

294
00:24:40,400 --> 00:24:45,200
Remember that the password you select for the hidden volume is the one that you're going to be keeping

295
00:24:45,200 --> 00:24:46,240
secret.

296
00:24:46,460 --> 00:24:52,940
And it's probably one that you want to be as strong as possible a minimum of 20 characters the password

297
00:24:52,940 --> 00:24:58,970
that you choose for the hidden volume needs to be as this message says substantially different from

298
00:24:59,000 --> 00:25:00,980
your other two passwords.

299
00:25:00,980 --> 00:25:04,460
That is the outer end decoy volumes.

300
00:25:04,460 --> 00:25:08,840
Once again you have the option of using key files or setting a pin.

301
00:25:08,840 --> 00:25:10,520
I'm not going to do so.

302
00:25:10,550 --> 00:25:15,350
This has been covered but you have the option when you're ready click Next

303
00:25:18,090 --> 00:25:24,300
once again we're going to wave our mouse cursor around to gather entropy increase the cryptographic

304
00:25:24,300 --> 00:25:25,230
strength.

305
00:25:25,290 --> 00:25:29,490
Notice that you don't have an option to set a file system currently.

306
00:25:29,640 --> 00:25:31,200
When you're ready click format

307
00:25:35,100 --> 00:25:36,990
and we're done with this step.

308
00:25:36,990 --> 00:25:40,650
Just like the creation of a hidden volume on USP.

309
00:25:40,860 --> 00:25:44,440
The creation of a hidden volume happens almost instantly.

310
00:25:44,550 --> 00:25:49,150
Now as I said before and I'll say it again.

311
00:25:49,290 --> 00:25:50,940
Get ready for the pain.

312
00:25:51,060 --> 00:25:56,290
You thought creating the outer volume took a long time but that was just the tip of the iceberg.

313
00:25:56,340 --> 00:26:01,800
As soon as we clicks the start button very script will begin copying the current version of Windows

314
00:26:02,070 --> 00:26:07,120
that we are running right now into the hidden volume that we just created.

315
00:26:07,140 --> 00:26:13,680
It's then going to wipe the original completely out of existence in a secure manner that we will be

316
00:26:13,680 --> 00:26:15,510
prompted to specify.

317
00:26:15,510 --> 00:26:21,380
So we're gonna click start and we will be required to restart the computer.

318
00:26:21,390 --> 00:26:25,470
This is all going to happen in the bootloader so click.

319
00:26:25,470 --> 00:26:27,650
Yes.

320
00:26:27,800 --> 00:26:29,960
Welcome to the very crypt bootloader.

321
00:26:29,960 --> 00:26:33,800
The screen may look slightly different in you EFI.

322
00:26:33,800 --> 00:26:42,060
It is possible to abort at this stage by pressing the escape key which will allow you to boot into windows.

323
00:26:42,080 --> 00:26:44,510
We haven't as of yet done anything.

324
00:26:44,510 --> 00:26:49,850
As soon as we put in the password to our hidden operating system however everything is going to be set

325
00:26:49,850 --> 00:26:51,050
in motion.

326
00:26:52,970 --> 00:26:56,410
If you selected a value for Pym you would enter it now.

327
00:26:56,570 --> 00:27:01,230
Otherwise just press enter the password will now verify.

328
00:27:01,280 --> 00:27:07,100
I have noticed that this verification process takes substantially longer with better script than it

329
00:27:07,100 --> 00:27:08,750
does with true script.

330
00:27:08,750 --> 00:27:15,590
Presumably this is a result of updated security although the true script audit which I do strongly encourage

331
00:27:15,590 --> 00:27:18,530
you to read online if you're interested.

332
00:27:18,530 --> 00:27:21,870
Found no flaws with bootloader implementation.

333
00:27:21,950 --> 00:27:25,450
In any case you are in for a bit of a wait here.

334
00:27:25,460 --> 00:27:32,760
But once the password does verify the process of copying the hidden system will begin.

335
00:27:32,760 --> 00:27:33,810
There we go.

336
00:27:33,810 --> 00:27:40,620
The version of Windows we were just using on the C partition is now being copied into the hidden container

337
00:27:41,160 --> 00:27:45,200
or volume that we created on the D partition.

338
00:27:45,210 --> 00:27:47,650
That is to say on the first partition.

339
00:27:47,700 --> 00:27:50,730
Windows is being copied onto the second partition.

340
00:27:50,730 --> 00:27:57,660
Once this is done we'll boot into the hidden operating system on the second partition and be prompted

341
00:27:57,660 --> 00:28:04,050
to securely delete and wipe all data located on that first partition or C partition.

342
00:28:04,050 --> 00:28:11,360
Once that is done we're going to begin the process of installing Kali Linux as an encrypted system.

343
00:28:11,400 --> 00:28:20,430
Once Cally is installed then we can go ahead and install our decoy Windows operating system on the first

344
00:28:20,430 --> 00:28:21,330
partition.

345
00:28:21,330 --> 00:28:28,020
Once all of our systems are encrypted the very crypto bootloader will direct you to the correct system

346
00:28:28,050 --> 00:28:30,330
based on the password you enter.

347
00:28:30,330 --> 00:28:37,020
In other words if you wish to boot into the decoy operating system you would supply your decoy password.

348
00:28:37,200 --> 00:28:43,620
If you want to boot into the hidden operating system which is being created for us right now you'd supplier

349
00:28:43,620 --> 00:28:49,350
hidden password if you wanted to boot into Cali Linux you would press the escape key.

350
00:28:49,530 --> 00:28:56,850
Select the second mutable partition which we're going to setup and that would then take you to the password

351
00:28:56,850 --> 00:29:00,750
screen where you would enter your encryption password for Cally.

352
00:29:00,750 --> 00:29:05,910
It is strongly recommended that you read through all of our crypto documentation on hidden operating

353
00:29:05,910 --> 00:29:09,300
systems so that you can maintain plausible deniability.

354
00:29:09,300 --> 00:29:15,900
It is also recommended that your decoy operating system be used from time to time so that it shows signs

355
00:29:15,900 --> 00:29:21,720
of being lived in a decoy system that is never used makes a very poor decoy.

356
00:29:21,720 --> 00:29:27,780
I would also like to note in case you are a little worried at this point that the decoy system works

357
00:29:27,780 --> 00:29:34,720
exactly like a normal windows installation since these are actually two totally separate partitions.

358
00:29:34,800 --> 00:29:41,400
You can save files on the decoy operating system without any fear of corrupting the hidden system as

359
00:29:41,400 --> 00:29:47,370
would be the case if you saved files to the outer volume without first placing it into protected mode.

360
00:29:47,370 --> 00:29:50,730
This will be demonstrated a little later in the video for right now.

361
00:29:50,730 --> 00:29:54,860
I'm going to make a cut to the recording so that we can skip to the end of this process.

362
00:29:54,870 --> 00:29:56,680
Copying is now complete.

363
00:29:56,790 --> 00:30:06,530
Enter the password to boot into your hidden operating system remember to just press enter for Pim unless

364
00:30:06,530 --> 00:30:15,190
you set a value in which case you would enter that value excellent our hidden system is now up and running.

365
00:30:15,270 --> 00:30:17,190
Read through this if you want.

366
00:30:17,190 --> 00:30:23,310
It's just telling you that even though we appear to be on C drive we are in fact on the D drive.

367
00:30:23,370 --> 00:30:29,640
Of course your partition designations may vary but the point is that the applications will not be able

368
00:30:29,640 --> 00:30:35,130
to tell the difference between a hidden and decoy systems because both systems will appear to be the

369
00:30:35,130 --> 00:30:43,530
primary system partition or in this case c if we were to click the defer button we could postpone the

370
00:30:43,530 --> 00:30:46,290
next step until our next reboot.

371
00:30:46,290 --> 00:30:49,650
If you're ready to proceed click next.

372
00:30:49,650 --> 00:30:51,570
Now it's time to wait again.

373
00:30:51,630 --> 00:30:54,900
The original system needs to be securely deleted.

374
00:30:55,140 --> 00:31:00,430
As you know simply deleting something of a hard drive won't actually make the information go away.

375
00:31:00,450 --> 00:31:07,560
It can still be recovered by using certain tools and forensic techniques to securely delete data.

376
00:31:07,620 --> 00:31:13,510
We're going to need to overwrite that data that we wish to delete with random nonsense.

377
00:31:13,560 --> 00:31:19,410
The more we do this the harder it will be to recover the original operating system or to even know that

378
00:31:19,410 --> 00:31:20,600
one existed.

379
00:31:20,670 --> 00:31:21,720
Click next.

380
00:31:21,840 --> 00:31:27,840
As I explained in the prior video the number of passes indicates how securely your data is going to

381
00:31:27,840 --> 00:31:31,990
be wiped but also adds time to this already lengthy process.

382
00:31:32,010 --> 00:31:38,580
One pass will simply overwrite the operating system and that's that three passes is a better level of

383
00:31:38,580 --> 00:31:45,450
security and is used by the Department of Defense of the United States to wipe secret data seven passes

384
00:31:45,510 --> 00:31:51,120
is used by the DOJ to wipe data classified top secret and above 35 passes.

385
00:31:51,150 --> 00:31:57,940
Also known as the government wipe is generally used only when you plan to discard a drive.

386
00:31:57,960 --> 00:32:01,740
It is extremely hard on even conventional hard drives.

387
00:32:01,770 --> 00:32:06,750
And remember also that solid state drives have a limited number of read rights before they begin to

388
00:32:06,750 --> 00:32:07,820
fail.

389
00:32:07,830 --> 00:32:13,200
The choice is yours but three passes should be very sufficient for most users.

390
00:32:13,230 --> 00:32:19,830
If you have the time to devote and if you are paranoid 7 passes should be enough to defeat even the

391
00:32:19,830 --> 00:32:21,570
most determined adversary.

392
00:32:21,570 --> 00:32:28,380
However if your life hangs in the balance and you absolutely positively must do so you can select the

393
00:32:28,380 --> 00:32:29,310
government wipe.

394
00:32:29,310 --> 00:32:33,760
I've never actually heard of anyone selecting 256 passes.

395
00:32:33,840 --> 00:32:39,800
I wasn't even aware that very crypt added that option and frankly it's kind of beyond insane.

396
00:32:39,870 --> 00:32:45,840
If you ever have a hard drive that requires that level of time and effort to wipe you're probably just

397
00:32:45,840 --> 00:32:54,030
better off smashing it and burying the pieces 256 passes will not be a good choice for hard drive longevity.

398
00:32:54,030 --> 00:32:58,950
I strongly recommend that you not choose it when you've made your selection.

399
00:32:58,980 --> 00:33:01,650
I'm going to go with one WIP for this demonstration.

400
00:33:01,890 --> 00:33:06,310
Click Next when you're ready to begin click wipe.

401
00:33:06,320 --> 00:33:11,600
You will be prompted with a warning that the entire contents of the original operating system will be

402
00:33:11,600 --> 00:33:12,770
erased.

403
00:33:12,800 --> 00:33:22,090
Once again we're being asked to generate entropy in the form of mouse movements.

404
00:33:22,100 --> 00:33:28,610
This is of course the random pool if we click display pool it will change these symbols to hexadecimal

405
00:33:29,580 --> 00:33:36,000
this is because as I said Windows cryptographic functions can potentially fail or be compromised.

406
00:33:36,020 --> 00:33:43,670
So while doing this may seem a bit tiresome it does add extra layers of security that is not easily

407
00:33:43,670 --> 00:33:45,470
sabotaged.

408
00:33:45,470 --> 00:33:51,850
So when you're done click continue and click yes to authorize as always.

409
00:33:51,920 --> 00:33:56,690
Once the authorization is done very crypto will proceed to wipe the original drive.

410
00:33:56,690 --> 00:34:03,470
Keep in mind as you watch this that the amount of space we're dealing with is really quite small and

411
00:34:03,470 --> 00:34:07,130
I'm only doing a single wipe for a modern hard drive.

412
00:34:07,130 --> 00:34:10,840
Be prepared to devote hours to this stage of the process.

413
00:34:10,850 --> 00:34:11,430
All right.

414
00:34:11,480 --> 00:34:15,800
The contents of the original operating system have been securely erased.

415
00:34:15,890 --> 00:34:18,920
Our first partition is now totally blank.

416
00:34:18,920 --> 00:34:24,620
You should read through this information carefully and maybe even print it the first thing it is telling

417
00:34:24,620 --> 00:34:30,640
you to do is power off your computer and leave it powered off for at least several minutes.

418
00:34:30,710 --> 00:34:34,420
Although ideally you should do this for up to an hour.

419
00:34:34,460 --> 00:34:39,990
This is because memory still remains active in the ram ships until they have had time to cool.

420
00:34:40,010 --> 00:34:44,360
And this may include evidence of your hidden operating system.

421
00:34:44,360 --> 00:34:49,370
If we were doing this normally the next step would be to install our Windows operating system as the

422
00:34:49,370 --> 00:34:50,030
decoy.

423
00:34:50,060 --> 00:34:56,840
However since we want to install an encrypted version of Linux in this case Kelly we need to do that

424
00:34:56,840 --> 00:34:57,870
first.

425
00:34:57,950 --> 00:35:04,250
Once our encrypted Cally is installed with the grub bootloader and our designated boot partition we

426
00:35:04,250 --> 00:35:11,000
can then go ahead and install windows again on the first partition encrypt it and everything should

427
00:35:11,000 --> 00:35:12,080
work smoothly.

428
00:35:12,080 --> 00:35:19,340
So we need to take our Cally installation media and use it to boot up our computer

429
00:35:21,920 --> 00:35:26,740
so I'm going to go ahead and reboot with the Kelly Cedi installed.

430
00:35:26,870 --> 00:35:31,530
Once you reach the screen you're going to select graphical installation.

431
00:35:31,550 --> 00:35:36,530
Most of these initial options are pretty straightforward so I'm just going to go through this quickly.

432
00:35:36,650 --> 00:35:38,100
Select your language.

433
00:35:38,180 --> 00:35:39,110
Continue.

434
00:35:39,140 --> 00:35:44,340
Select your country click continue and select your keyboard layout.

435
00:35:44,490 --> 00:35:49,860
It's not necessary to configure the network at this time so it will click continue.

436
00:35:49,860 --> 00:35:53,240
Now we have the opportunity to name our system.

437
00:35:53,280 --> 00:35:55,560
You can provide any hostname you like.

438
00:35:55,560 --> 00:35:57,440
I'm just going to go with Carly.

439
00:35:57,480 --> 00:35:59,190
When you've done this click continue.

440
00:35:59,370 --> 00:36:01,610
And now we need to set our root password.

441
00:36:01,620 --> 00:36:07,010
Remember that the default is tor t o o r.

442
00:36:07,080 --> 00:36:11,310
I'm going to set it as Tor but you may set it as whatever you wish.

443
00:36:11,310 --> 00:36:18,420
This is not our encryption password but rather the password to log into Cally once we've decrypted it

444
00:36:18,480 --> 00:36:20,280
click continue.

445
00:36:20,410 --> 00:36:23,090
Go ahead and select your time zone.

446
00:36:23,110 --> 00:36:27,180
Okay we're gonna go ahead and click manual and continue.

447
00:36:27,180 --> 00:36:33,700
Now we need to set up our boot partition so we've got these two partitions down here that we created

448
00:36:33,730 --> 00:36:35,620
after the two primaries.

449
00:36:35,620 --> 00:36:42,670
Now this first primary was our original Windows operating system which has been wiped.

450
00:36:42,690 --> 00:36:47,610
Third primary in this particular scheme is our hidden operating system.

451
00:36:47,650 --> 00:36:55,240
And you can tell because this is a little more than twice the total size of this first partition.

452
00:36:55,510 --> 00:37:02,170
And we have these two logical partitions down here and the first one the larger one is going to contain

453
00:37:02,170 --> 00:37:04,270
our encrypted Cowling installation.

454
00:37:04,270 --> 00:37:11,260
So we need to set up our boot partition that is going to link to that encrypted Cally and it's always

455
00:37:11,260 --> 00:37:12,760
the last one on the list.

456
00:37:12,820 --> 00:37:22,840
So we're gonna double click it and we're going to double click use as X T for journaling file system.

457
00:37:22,910 --> 00:37:30,100
We're gonna set the Mount point to boot and then we're going to click done setting up partition and

458
00:37:30,100 --> 00:37:36,400
notice now that this change to e x T4 and we see that it is now a beautiful partition while we're at

459
00:37:36,400 --> 00:37:41,290
it let's go ahead and double click on the Cowley partition.

460
00:37:41,290 --> 00:37:46,900
This isn't absolutely necessary but it will make it easier to recognize later so we don't make a mistake

461
00:37:47,460 --> 00:37:52,070
and we're going to double click use as and we're going to select X T4 again.

462
00:37:52,480 --> 00:37:57,870
And this is again mainly just so that we know what we're looking at later in the process.

463
00:37:58,000 --> 00:38:04,090
We don't want to accidentally format one of our windows partitions by mistake click done setting up

464
00:38:04,090 --> 00:38:05,440
partition.

465
00:38:05,440 --> 00:38:10,510
And with that done we're going to come up to configure encrypted volumes and double click it and we're

466
00:38:10,510 --> 00:38:13,660
going to select yes we want to write the changes.

467
00:38:13,660 --> 00:38:17,720
This may take a few moments okay.

468
00:38:18,010 --> 00:38:20,700
We're going to click Create encrypted volume.

469
00:38:20,740 --> 00:38:28,450
Now we're going to select R. Kelly Linux partition or what is going to become our encrypted Cally Linux

470
00:38:28,450 --> 00:38:29,560
partition.

471
00:38:29,560 --> 00:38:34,420
But this is very important don't also select your beautiful partition.

472
00:38:34,720 --> 00:38:39,720
What we're doing here is we're creating a container an encrypted container on.

473
00:38:39,760 --> 00:38:47,980
In this case SDH 5 and your number may vary which is going to contain Cally and if you were to include

474
00:38:48,310 --> 00:38:55,210
your boot partition in that encrypted container then it's not going to be recognized when you boot up

475
00:38:55,210 --> 00:38:57,940
your computer and you won't have any way of getting into it.

476
00:38:58,030 --> 00:39:03,610
So just select your Kelly partition and be careful not to select your windows partition and one more

477
00:39:03,610 --> 00:39:04,150
thing.

478
00:39:04,150 --> 00:39:12,700
Make note of what your beautiful partition is in my case it's Dev slash SD 6.

479
00:39:12,820 --> 00:39:13,900
Yours may vary.

480
00:39:13,900 --> 00:39:15,550
You're going to need to remember this.

481
00:39:15,550 --> 00:39:21,670
You might want to write it down because we're gonna have to manually enter forward slash Dev 4D slash

482
00:39:21,730 --> 00:39:27,910
SD 6 when it comes time to specify where we want to install the bootloader and if we install it in the

483
00:39:27,910 --> 00:39:30,770
wrong place the whole process will fail.

484
00:39:30,790 --> 00:39:36,100
So when you're ready click continue the default settings are in my opinion just fine.

485
00:39:36,100 --> 00:39:39,370
We do have the option to change certain things.

486
00:39:39,370 --> 00:39:47,660
For example if you don't like a yes encryption you do have other options but the defaults are going

487
00:39:47,660 --> 00:39:49,340
to be very strong.

488
00:39:49,340 --> 00:39:55,470
So we're just going to go with that in this demonstration when you're ready click done setting up partition

489
00:39:56,400 --> 00:39:58,500
and then we're going to click finish.

490
00:39:58,800 --> 00:40:02,010
And when prompted we are going to write the changes.

491
00:40:02,100 --> 00:40:09,810
Now we're being prompted to erase all data on the partition that we have selected for encryption.

492
00:40:09,810 --> 00:40:17,790
This wiping process is more or less exactly what very cryptic does with a partition prior to encryption.

493
00:40:17,820 --> 00:40:20,060
It is important for security reasons.

494
00:40:20,190 --> 00:40:22,920
So I recommend that you do so.

495
00:40:22,920 --> 00:40:30,000
We're going to click yes you have the option of canceling this process to save time in this demonstration.

496
00:40:30,060 --> 00:40:35,460
I'm going to cancel but if you're doing this for real I strongly suggest that you allow this process

497
00:40:35,460 --> 00:40:36,490
to complete.

498
00:40:36,510 --> 00:40:39,550
Now you need to select your encryption passphrase.

499
00:40:39,570 --> 00:40:47,580
This passphrase should be 20 or more characters any less than that and will be relatively easy to brute

500
00:40:47,580 --> 00:40:49,860
force depending on the password you select.

501
00:40:49,920 --> 00:40:56,040
There's really no point in encrypting your entire operating system if your password is something easily

502
00:40:56,310 --> 00:40:57,630
found in the dictionary.

503
00:40:57,630 --> 00:41:04,110
In any case whatever password you select you need to remember because there is absolutely no way to

504
00:41:04,110 --> 00:41:06,330
recover it if you forget it.

505
00:41:06,450 --> 00:41:08,240
You will be locked out of your system.

506
00:41:08,250 --> 00:41:12,000
So choose carefully when you've entered your very strong password.

507
00:41:12,000 --> 00:41:13,120
Click Continue.

508
00:41:13,140 --> 00:41:15,000
You probably won't see this warning.

509
00:41:15,000 --> 00:41:19,440
Hopefully you won't see this with that out of the way.

510
00:41:19,470 --> 00:41:27,700
We're going to configure the launch call volume manager we're going to say yes to write changes and

511
00:41:27,740 --> 00:41:30,120
now we need to create our volume group.

512
00:41:30,120 --> 00:41:34,040
And this is what's going to contain all of our encrypted volumes.

513
00:41:34,050 --> 00:41:40,470
Or rather the volume is going to be encrypted and contain our operating system and our swap area.

514
00:41:40,680 --> 00:41:46,010
So click Create volume group and we're going to need to give the volume group a name.

515
00:41:46,020 --> 00:41:47,580
This can be any name you want.

516
00:41:47,580 --> 00:41:54,240
For simplicity I'm just going to call it crypto underscore.

517
00:41:54,270 --> 00:41:57,030
KELLY Again you can name it whatever you want.

518
00:41:57,050 --> 00:41:58,210
Click Continue.

519
00:41:58,280 --> 00:42:05,690
And now we need to select or partition that we're using as this encrypted volume.

520
00:42:05,700 --> 00:42:13,360
It's been setup in my case it's SD a five underscore crypt 64.

521
00:42:13,380 --> 00:42:16,800
Be careful not to select any of your other partitions.

522
00:42:16,800 --> 00:42:17,610
Click Continue.

523
00:42:17,610 --> 00:42:24,230
Now we're going to click Create logical volume and we're going to select our group and we're going to

524
00:42:24,230 --> 00:42:30,760
define this first volume as the swap underscore area.

525
00:42:30,920 --> 00:42:36,140
You could just call it swap or whatever you like click continue.

526
00:42:36,140 --> 00:42:42,500
Now how much space you assigned your swamp area is up to you.

527
00:42:42,560 --> 00:42:47,690
There is a lot of debate about how big a swamp area should be.

528
00:42:47,690 --> 00:42:56,420
I personally believe just a little over four gigabytes is best if you have a larger system.

529
00:42:56,420 --> 00:42:58,620
You may wish to have a larger swap area.

530
00:42:58,730 --> 00:43:02,690
You can of course choose not to use a swamp area at all.

531
00:43:02,690 --> 00:43:03,740
If you wish.

532
00:43:03,740 --> 00:43:10,820
Whatever you decide entered and click continue and we're going to create logical volume again select

533
00:43:10,880 --> 00:43:18,460
our crypto Kelly group now that this is going to be the root partition or the Cali partition if you're

534
00:43:18,460 --> 00:43:26,350
one of those people who likes to split up your Linux installation for example having a root partition

535
00:43:26,380 --> 00:43:31,020
and a different home partition and so on and so forth you can do that.

536
00:43:31,030 --> 00:43:35,830
I'm not going to be demonstrating it in this tutorial it's a little outside of the scope.

537
00:43:35,830 --> 00:43:41,350
I want to keep things simple for this demonstration but if this is how you would do it you just create

538
00:43:41,920 --> 00:43:48,540
each logical volume within this group and then set it up accordingly in the next steps.

539
00:43:48,580 --> 00:43:56,620
So we're going to call this the Kali underscore root and click continue and we're going to assign it

540
00:43:56,650 --> 00:44:01,770
the maximum amount of space left click finish.

541
00:44:02,550 --> 00:44:06,180
So now we need to set up our root partition and our swap area.

542
00:44:06,180 --> 00:44:08,920
So this first partition we're going to double click on it.

543
00:44:09,180 --> 00:44:14,770
We're going to double click on use as X T4 or whatever file system we prefer.

544
00:44:14,940 --> 00:44:17,190
And we're going to set the Mount point as root.

545
00:44:17,190 --> 00:44:22,870
Now again I'm just going to quickly point out that if you wanted to separate your partitions you would

546
00:44:22,870 --> 00:44:30,090
have simply created a few more partitions within the volume that we created.

547
00:44:30,090 --> 00:44:35,930
And then you would set for example your home partition and your root partition and so on and so forth.

548
00:44:35,940 --> 00:44:37,430
But I don't want to get confusing.

549
00:44:37,530 --> 00:44:42,160
We're gonna set the root partition and we're gonna say done setting up partition and now we're gonna

550
00:44:42,180 --> 00:44:48,390
double click on this second four point two gigabyte partition and we're going to double click on use

551
00:44:48,390 --> 00:44:51,870
as we're gonna define it as the swamp area.

552
00:44:51,870 --> 00:44:57,610
So double click on that done setting up partition and now we're going to scroll all the way to the bottom.

553
00:44:57,670 --> 00:44:59,800
We've got our root partition.

554
00:44:59,800 --> 00:45:01,850
We've got our swamp area.

555
00:45:01,900 --> 00:45:08,760
These are all setup within our encrypted SDK five underscore crypt volume that we've created.

556
00:45:08,800 --> 00:45:14,140
So we're going to click finish partitioning and write changes to disk.

557
00:45:14,140 --> 00:45:18,870
We're going to click yes to confirm we wish to write changes and click continue.

558
00:45:18,880 --> 00:45:24,190
Now the operating system will install this will take some time so please be patient.

559
00:45:24,220 --> 00:45:31,010
Once the lengthy installation process is complete you can use a network mirror if you want to configure

560
00:45:31,010 --> 00:45:32,220
the package manager.

561
00:45:32,230 --> 00:45:33,710
I'm going to say no.

562
00:45:33,730 --> 00:45:39,220
Okay now here we need to be a little careful because this is the part where most people seem to goof

563
00:45:39,220 --> 00:45:40,520
up this process.

564
00:45:40,540 --> 00:45:47,100
We're now being asked if we want to install grub bootloader to the master boot record.

565
00:45:47,110 --> 00:45:55,150
Normally we would do this but remember the master boot record is going to be taken up by the very script

566
00:45:55,180 --> 00:45:56,860
or true crypt bootloader.

567
00:45:56,860 --> 00:46:03,910
So we can't install grub to the master boot record we need to say no and click continue and then we're

568
00:46:03,910 --> 00:46:09,370
going to specify our second beautiful partition and this has to be done manually.

569
00:46:09,370 --> 00:46:11,300
Remember I said to write it down.

570
00:46:11,440 --> 00:46:17,220
So we're going to enter the device and in my case it's going to be forward slash Dev forward slash Esh

571
00:46:17,350 --> 00:46:19,880
SD a six.

572
00:46:19,930 --> 00:46:21,100
Yours may vary.

573
00:46:21,100 --> 00:46:26,800
Once you've typed in your boot partition going to click continue and grub will be installed to that

574
00:46:26,800 --> 00:46:28,140
partition.

575
00:46:28,150 --> 00:46:34,930
So now when we boot our computer we will first be presented with the very script or true script bootloader

576
00:46:35,590 --> 00:46:42,880
and if we were to press the escape key we would see a list of beautiful partitions we would select.

577
00:46:42,910 --> 00:46:50,290
The second partition on the list and that partition is going to contain R. Kelly Linux grub bootloader

578
00:46:50,410 --> 00:46:56,110
which will then allow us to boot into Kali and will then be prompted for our encryption password to

579
00:46:56,170 --> 00:47:03,100
open the Cowley volume which is encrypted so hopefully that didn't seem too confusing with the installation

580
00:47:03,100 --> 00:47:10,730
complete and go ahead and remove your installation media whether it's a CDO or a pen drive containing

581
00:47:10,730 --> 00:47:16,300
your Kelly Linux image and then when you're done click continue.

582
00:47:16,300 --> 00:47:20,790
Once you reboot you'll find yourself in the very crypt bootloader or true crypt.

583
00:47:20,830 --> 00:47:25,950
If you used true crypto instead we haven't installed the decoy operating system yet.

584
00:47:25,960 --> 00:47:33,160
So if you enter your hidden password that is to say the password for your hidden Windows operating system

585
00:47:33,580 --> 00:47:35,070
you will boot into it.

586
00:47:35,230 --> 00:47:42,440
But if you press the escape key notice that we have two beautiful partitions.

587
00:47:42,440 --> 00:47:50,720
If we select the second mutable partition we're in grub we'll go ahead and boot Kelly and in a moment

588
00:47:50,780 --> 00:47:53,570
we will be prompted for our encryption password

589
00:47:56,700 --> 00:47:58,770
and here we are in Cali normally.

590
00:47:58,770 --> 00:48:05,120
Now we would just enter our user name which in most cases is route and whatever password you specified.

591
00:48:05,130 --> 00:48:07,380
But we're not going to log in to Cali right now.

592
00:48:07,380 --> 00:48:14,910
We've confirmed that Cali has been installed successfully and is encrypted so now it's time to install

593
00:48:14,910 --> 00:48:18,270
the windows decoy operating system.

594
00:48:18,270 --> 00:48:20,650
This will be the final step of this procedure.

595
00:48:20,700 --> 00:48:27,990
We're going to need to insert our windows installation media whether that's a city that you burned with

596
00:48:27,990 --> 00:48:35,130
the ISO or a U.S. B pen drive and we're going to boot our computer from it to get into the windows installer

597
00:48:35,640 --> 00:48:41,910
then we're going to install Windows normally and this will temporarily make the hidden operating system

598
00:48:42,000 --> 00:48:49,050
unsuitable and we're going to encrypt this new installation of Windows to be our decoy.

599
00:48:49,110 --> 00:48:54,300
Once this is done all three operating systems will once again be accessible.

600
00:48:54,480 --> 00:48:56,180
So let's go ahead and do that now.

601
00:48:56,190 --> 00:48:56,770
All right then.

602
00:48:56,970 --> 00:49:03,060
Having booted from our windows installation media we will be presented with a screen like this.

603
00:49:03,060 --> 00:49:09,900
Now this is all a very straightforward process of following prompts all of which you'll see me do though

604
00:49:09,900 --> 00:49:15,000
I will make little recording edits to make sure that this process speeds along.

605
00:49:15,000 --> 00:49:18,480
So when you're ready click next and click install.

606
00:49:18,480 --> 00:49:22,980
This is where you enter your product key for your Windows installation.

607
00:49:22,980 --> 00:49:26,050
You can skip this step if you don't have a key.

608
00:49:26,070 --> 00:49:30,820
But remember you need to activate Windows before you encrypted.

609
00:49:30,830 --> 00:49:34,890
This is very important since I'm doing this for a demonstration.

610
00:49:34,890 --> 00:49:37,360
I will click I don't have a product key.

611
00:49:37,380 --> 00:49:39,300
Select your operating system.

612
00:49:39,300 --> 00:49:45,000
If you're presented with different choices remember to select the same operating system that you're

613
00:49:45,000 --> 00:49:47,980
using for your hidden operating system.

614
00:49:48,000 --> 00:49:54,680
In my case that is Windows 10 professional you will be required to agree to these terms before you'll

615
00:49:54,680 --> 00:49:59,750
be allowed to proceed select custom.

616
00:49:59,880 --> 00:50:05,190
And remember to select the first partition not the system reserved.

617
00:50:05,190 --> 00:50:06,530
If you have one.

618
00:50:06,750 --> 00:50:09,030
But this first partition.

619
00:50:09,030 --> 00:50:13,200
We wiped that contained or original Windows installation.

620
00:50:13,200 --> 00:50:17,210
Remember it'll be smaller than the partition immediately following it.

621
00:50:17,220 --> 00:50:25,050
Because this is our hidden partition which is by requirement a little over twice the size.

622
00:50:25,080 --> 00:50:29,630
When you're ready click Next windows will now proceed to install normally.

623
00:50:29,670 --> 00:50:31,070
Please be patient.

624
00:50:31,140 --> 00:50:36,310
The rest of the installation process is really just going through the steps.

625
00:50:36,360 --> 00:50:39,820
You can use Express settings if you want to.

626
00:50:39,840 --> 00:50:44,840
I always choose customize and I tend to switch all of these off.

627
00:50:45,930 --> 00:50:51,240
I'm not sure it does any good with Windows 10 but once you've made your selections and you're ready

628
00:50:51,240 --> 00:50:52,140
to proceed

629
00:50:55,840 --> 00:51:01,400
once you're done windows will setup and you should boot straight into the operating system.

630
00:51:01,480 --> 00:51:06,670
So once all the critical updates are downloaded and everything is setup and we're back in Windows we're

631
00:51:06,670 --> 00:51:07,330
gonna go ahead.

632
00:51:07,330 --> 00:51:13,450
We're going to open up our browser of choice or more likely edge because that's what comes default with

633
00:51:13,450 --> 00:51:17,550
Windows nowadays and we're going to download a better script.

634
00:51:17,620 --> 00:51:23,560
Remember that we need to download the installer and not the portable version with that done we can go

635
00:51:23,560 --> 00:51:30,400
ahead and close our browser and we'll run the very script installation click yes to authorize select

636
00:51:30,400 --> 00:51:38,740
your language accept the terms and click install once the installation is successful click OK finish

637
00:51:39,070 --> 00:51:42,770
you can read through the beginners tutorial if you wish.

638
00:51:42,790 --> 00:51:46,420
Close out of this all right now with very scripts installed.

639
00:51:46,420 --> 00:51:53,260
We're gonna go ahead and we're going to encrypt this operating system and it's going to become our decoy.

640
00:51:53,260 --> 00:51:59,560
Now remember it's very important that you make sure that your current windows installation is properly

641
00:51:59,560 --> 00:52:02,950
activated before proceeding to the next step.

642
00:52:02,950 --> 00:52:07,340
It's also recommended that you go ahead and download updates at this time.

643
00:52:07,360 --> 00:52:09,160
You don't absolutely have to.

644
00:52:09,160 --> 00:52:15,250
The reason I recommend to doing that is because when you're running through the very script reboot you

645
00:52:15,250 --> 00:52:21,580
really don't want to deal with Windows Updates reconfiguring things in the background.

646
00:52:21,610 --> 00:52:27,910
So it is your choice but when you're ready to proceed go ahead and run very crypt and from here we're

647
00:52:27,910 --> 00:52:34,690
gonna go to system and select encrypt system partition drive the hidden operating system has already

648
00:52:34,690 --> 00:52:35,690
been created.

649
00:52:35,740 --> 00:52:40,030
We're going to now create the decoy so we want to make sure that normal is selected.

650
00:52:40,030 --> 00:52:46,930
Press next we're going to select encrypt the Windows system partition click next.

651
00:52:47,030 --> 00:52:53,690
And now once again were on my favorite screen which is essentially trying to trick you.

652
00:52:53,690 --> 00:52:57,980
I have never really run into a case where multi boot was the correct choice.

653
00:52:57,980 --> 00:53:03,350
Pretty much every time no matter how you set this up you're going to want to go with single boot so

654
00:53:03,350 --> 00:53:06,350
click the single boot radial button and click next.

655
00:53:06,350 --> 00:53:08,270
Now this is very important.

656
00:53:08,360 --> 00:53:13,490
Whatever options you selected for the hidden operating system need to be repeated here.

657
00:53:13,520 --> 00:53:19,880
In other words if you selected a yes for the encryption algorithm you need to select a yes again and

658
00:53:19,880 --> 00:53:22,490
the same is true for the hash algorithm.

659
00:53:22,520 --> 00:53:29,540
If you change either option in other words if your hidden operating system and your decoy have either

660
00:53:29,540 --> 00:53:34,580
a different encryption algorithm or a different hash algorithm than the hidden operating system will

661
00:53:34,580 --> 00:53:35,300
not boot.

662
00:53:35,450 --> 00:53:40,700
So please make sure that these are the same choices you made when you set up the hidden operating system

663
00:53:41,060 --> 00:53:42,200
and click next.

664
00:53:42,200 --> 00:53:46,490
Now we need to give the password for our decoy operating system.

665
00:53:46,490 --> 00:53:51,740
And again it is important that you pick a good password to make the deception credible.

666
00:53:51,740 --> 00:53:53,910
You also need to be able to remember it.

667
00:53:53,910 --> 00:53:56,350
Few were ever forced to give up your password.

668
00:53:56,360 --> 00:54:00,000
This is the password you'd give up along with the outer volume.

669
00:54:00,080 --> 00:54:02,750
Again key files are an option.

670
00:54:02,750 --> 00:54:07,780
Do not select the use of the Pym option unless you did so with the hidden operating system.

671
00:54:07,910 --> 00:54:14,750
And if you did set a pin with the hidden operating system be sure you choose the same setting here 20

672
00:54:14,810 --> 00:54:20,180
or more characters is recommended for the password when you're ready click next.

673
00:54:20,180 --> 00:54:24,170
Now we've reached the random pool collection screen.

674
00:54:24,170 --> 00:54:28,550
This should look familiar to you by now and I trust it needs no further explanation.

675
00:54:28,580 --> 00:54:33,860
If you wish to display the pool content that option is available simply wave your mouse cursor around

676
00:54:33,860 --> 00:54:37,100
for as long as you can stand it and try to be as random as possible.

677
00:54:37,160 --> 00:54:42,410
And remember that the bar at the bottom of the screen really is just a suggestion.

678
00:54:42,410 --> 00:54:48,870
You can keep doing this longer if you wish and the longer the better.

679
00:54:48,900 --> 00:54:55,320
And once you're satisfied click next click yes to authorize the screen is letting us know that our keys

680
00:54:55,320 --> 00:54:56,330
have been generated.

681
00:54:56,340 --> 00:54:58,530
You can hide these keys if you wish.

682
00:54:58,530 --> 00:55:04,450
Now comes the tricky bit both true crypt and very crypt require you to create a rescue desk.

683
00:55:04,470 --> 00:55:11,250
If you encounter a situation where windows will not start or if the very crypt bootloader itself gets

684
00:55:11,280 --> 00:55:15,840
corrupted somehow the disk will allow you to repair this damage.

685
00:55:15,840 --> 00:55:18,380
Keep one very important detail in mind.

686
00:55:18,390 --> 00:55:24,510
However the rescue disk is not a substitution for the password and or key files.

687
00:55:24,720 --> 00:55:30,480
If you forget your password or you lose your key files or you set a pin and you forget about it you're

688
00:55:30,480 --> 00:55:31,300
out of luck.

689
00:55:31,320 --> 00:55:35,240
We can use the Browse button to select where we want to save the iso file.

690
00:55:35,250 --> 00:55:42,480
The file would then be placed on some form of external media such as a USP or burned to a CDO before

691
00:55:42,480 --> 00:55:48,240
proceeding very script gives you the option of skipping the rescue disk verification which is handy

692
00:55:48,240 --> 00:55:50,490
if your system doesn't have any way to mount it.

693
00:55:50,490 --> 00:55:56,730
True Crypt does not give you this option if you are using True Crypt you will need to mount the iso

694
00:55:56,730 --> 00:56:03,150
image somehow either by right clicking it and selecting the mount option in certain versions of Windows

695
00:56:03,270 --> 00:56:11,010
or by using third party software and Windows 7 to melt the image as if it were a drive for this tutorial.

696
00:56:11,010 --> 00:56:17,040
I'm going to go ahead and click skip rescue disk verification when you're ready click next.

697
00:56:17,070 --> 00:56:21,780
We're now being told essentially what I just said that the ISO for the rescue desk has been created

698
00:56:21,780 --> 00:56:28,320
in a directory that we specified and that it should at this time be moved to external media or burned

699
00:56:28,320 --> 00:56:29,420
onto a disk.

700
00:56:29,550 --> 00:56:35,190
Click Next this screen is telling you something important so don't just flash right through it.

701
00:56:35,190 --> 00:56:41,010
This is reminding you that each rescue disk is unique to the encrypted operating system that you're

702
00:56:41,160 --> 00:56:42,210
using it on.

703
00:56:42,240 --> 00:56:49,320
In other words if you create a rescue disk on another system or even a prior encryption on the system

704
00:56:49,320 --> 00:56:52,170
you're using now the disk won't work.

705
00:56:52,170 --> 00:56:59,100
Only the disk that is now being created will work with this encryption so keep that in mind and click

706
00:56:59,130 --> 00:56:59,720
OK.

707
00:56:59,790 --> 00:57:05,430
And last but not least we need to once again select our WIP mode since we already covered this with

708
00:57:05,430 --> 00:57:06,720
the hidden system creation.

709
00:57:06,720 --> 00:57:09,690
I won't go over it again for this demonstration.

710
00:57:09,690 --> 00:57:11,580
I'm selecting none.

711
00:57:11,580 --> 00:57:17,670
Keep in mind that the more passes you select the longer this process is going to take and the harder

712
00:57:17,670 --> 00:57:19,340
it's going to be on your drive.

713
00:57:19,350 --> 00:57:23,400
Please do not select government unless you absolutely have to.

714
00:57:23,400 --> 00:57:29,910
Once you've made your selection click next and the last step is going to be the encryption pretest when

715
00:57:29,910 --> 00:57:31,570
we click the test button.

716
00:57:31,590 --> 00:57:37,260
Windows is going to reboot and we will be presented with the very script password screen.

717
00:57:37,320 --> 00:57:43,830
If we fail to enter our password or if something broke along the way the test will fail and no harm

718
00:57:43,830 --> 00:57:44,910
will be done.

719
00:57:45,030 --> 00:57:50,880
If the password works and everything else functions correctly we will be prompted to proceed with the

720
00:57:50,880 --> 00:57:52,260
encryption process.

721
00:57:52,260 --> 00:57:57,420
Please note however that you must not boot into the hidden system at this time.

722
00:57:57,420 --> 00:58:02,610
It will seriously goof things up when you're ready click test.

723
00:58:02,610 --> 00:58:06,040
You may read through this if you wish otherwise click Okay.

724
00:58:06,150 --> 00:58:10,110
We will now be prompted to restart click yes to confirm.

725
00:58:11,240 --> 00:58:14,020
So here we are once again on the bootloader screen.

726
00:58:14,090 --> 00:58:18,370
I've mentioned before that cosmetically this is almost identical to the true script.

727
00:58:18,380 --> 00:58:19,690
Boot loading screen.

728
00:58:19,730 --> 00:58:25,520
Except that we have the option to show our password and Pym and also to skip authentication with the

729
00:58:25,520 --> 00:58:29,150
escape key which by the way does work with true crypto as well.

730
00:58:29,150 --> 00:58:31,670
Remember this is only the pre-test.

731
00:58:31,670 --> 00:58:34,510
Our system is not yet being encrypted.

732
00:58:34,730 --> 00:58:40,940
Enter the password you selected for the decoy operating system and again do not enter the password for

733
00:58:40,940 --> 00:58:44,400
the hidden system or the outer volume under P.M..

734
00:58:44,420 --> 00:58:50,810
Just press enter unless you specified a specific value in which case you would enter that value now

735
00:58:51,470 --> 00:58:53,680
true crypto has no Pym prompt.

736
00:58:53,780 --> 00:58:57,820
He will now verify our password and this may take a minute or two.

737
00:58:57,830 --> 00:59:02,950
Once done windows will boot normally and we can begin the process of encryption.

738
00:59:03,050 --> 00:59:08,150
Once Windows is finished rebooting will need to wait just a minute for the notification to pop up telling

739
00:59:08,150 --> 00:59:12,950
us that our pretest was successful and there it is our pretest was successful.

740
00:59:12,950 --> 00:59:18,300
We could click the defer button if we don't wish to begin encrypting right now.

741
00:59:18,320 --> 00:59:23,990
However we're ready so we're gonna go ahead and click encrypt read through this pop up and printed if

742
00:59:23,990 --> 00:59:24,990
you wish.

743
00:59:25,160 --> 00:59:31,850
It is simply telling you how to use the rescue disk if you need to when you're ready click OK and finally

744
00:59:31,850 --> 00:59:33,620
click yes to authorize.

745
00:59:33,620 --> 00:59:35,830
Now we can see the encryption progress.

746
00:59:35,930 --> 00:59:39,520
It would begin with the wiping of free space.

747
00:59:39,620 --> 00:59:42,410
If we had selected a white mode other than none.

748
00:59:42,410 --> 00:59:48,170
I said all of this in the prior video but you may have skipped it and it does bear repeating so I'm

749
00:59:48,170 --> 00:59:49,640
going to say it again now.

750
00:59:49,670 --> 00:59:52,710
I really can't stress enough just how long this takes.

751
00:59:52,730 --> 00:59:58,760
You are seeing this performed on a very small amount of space but for a real system this process can

752
00:59:58,760 --> 00:59:59,780
take days.

753
00:59:59,780 --> 01:00:03,040
A four terabyte hard drive might take up to a week or more.

754
01:00:03,050 --> 01:00:06,040
Of course it depends on many factors.

755
01:00:06,050 --> 01:00:12,410
I therefore suggest that you place your system somewhere cool and keep all potentially flammable objects

756
01:00:12,410 --> 01:00:18,410
away from it as you may need to leave it on for an extended period unattended and the heavy drive usage

757
01:00:18,410 --> 01:00:20,290
may cause it to heat up quite a bit.

758
01:00:20,300 --> 01:00:25,700
Please also keep in mind the laws of your region of the world concerning encryption.

759
01:00:25,730 --> 01:00:29,300
As I mentioned before I'm not an international lawyer.

760
01:00:29,300 --> 01:00:35,990
Depending on where you are in the world encryption may or may not be legal or you may be under a legal

761
01:00:35,990 --> 01:00:42,380
obligation to surrender your password and keys if requested to do so by certain authorities.

762
01:00:42,380 --> 01:00:44,930
Even if they do not have a warrant as such.

763
01:00:44,930 --> 01:00:48,380
If you fail to comply with these laws you may end up in hot water.

764
01:00:48,380 --> 01:00:51,950
This is very important to remember when you're traveling abroad.

765
01:00:51,950 --> 01:00:57,830
It might be 100 percent legal to encrypt your laptop in the United States but you might be in for a

766
01:00:57,830 --> 01:01:03,890
nasty shock when you travel to certain parts of the world and airport authorities demand that you decrypt

767
01:01:03,890 --> 01:01:09,590
it or worse you must do your due diligence and make certain that you were employing these techniques

768
01:01:09,680 --> 01:01:13,520
in a way consistent with the laws of wherever you happen to be.

769
01:01:13,640 --> 01:01:18,890
To avoid getting into any legal trouble the hidden operating system and plausible deniability exists

770
01:01:18,920 --> 01:01:25,640
so that in the event that some criminal attempts to compel you to give up your password you have a way

771
01:01:25,640 --> 01:01:31,490
of protecting your real data withholding the hidden password from lawful authorities when you are expressly

772
01:01:31,490 --> 01:01:37,160
required by law to give up all of your encryption keys may be illegal.

773
01:01:37,160 --> 01:01:43,400
Please have all of this sorted out in your mind long before you ever find yourself in this situation

774
01:01:43,460 --> 01:01:44,990
where you need to think about it.

775
01:01:44,990 --> 01:01:50,330
Encryption is a very good technology and protects innocent people from oppressive powers.

776
01:01:50,330 --> 01:01:55,250
Helps to ensure honest journalism and protect important information from criminal theft.

777
01:01:55,250 --> 01:01:59,060
There are many good and lawful reasons to employ encryption.

778
01:01:59,060 --> 01:02:06,610
Even at the level that we're seeing in this video and we're done click OK and finish all right now we're

779
01:02:06,610 --> 01:02:10,420
going to reboot the system.

780
01:02:10,470 --> 01:02:18,570
So now if we enter our decoy password our decoy operating system will boot if we enter our hidden password

781
01:02:18,720 --> 01:02:25,170
our hidden operating system will boot if we press the escape key and select the second mutable partition.

782
01:02:25,170 --> 01:02:31,860
As you saw before we can then boot into R. Kelly Linux installation and we will be prompted for our

783
01:02:31,860 --> 01:02:33,210
encryption password.

784
01:02:33,390 --> 01:02:37,630
So for right now we're gonna go ahead and we're going to boot into the decoy partition.

785
01:02:37,650 --> 01:02:40,070
Remember that if you did not specify a pin.

786
01:02:40,080 --> 01:02:41,130
Just press enter.

787
01:02:41,190 --> 01:02:45,780
Now we could end the video here and if this is all you need to know then.

788
01:02:45,780 --> 01:02:47,030
Thank you for your attention.

789
01:02:47,070 --> 01:02:56,040
But the last thing I'm going to show off is how to mount the decoy or outer volume.

790
01:02:56,040 --> 01:02:59,910
If you're ever called upon to do so this is something you will need to know.

791
01:02:59,910 --> 01:03:07,080
So here we are once again in our decoy installation of Windows and you'll notice that when you go to

792
01:03:07,080 --> 01:03:16,200
this P.C. or my computer you have this local disk D and we know that this is the partition which contains

793
01:03:16,200 --> 01:03:19,500
the hidden Windows operating system.

794
01:03:19,740 --> 01:03:28,020
But an adversary who is looking at this decoy installation of Windows will notice this drive and will

795
01:03:28,020 --> 01:03:30,750
probably ask you what it is.

796
01:03:30,750 --> 01:03:35,580
And of course you don't want to say that it contains a hidden Windows installation or that would defeat

797
01:03:35,580 --> 01:03:36,960
the whole purpose.

798
01:03:36,960 --> 01:03:44,010
So remember that we set up what was called an outer volume and this contained files that looked sensitive

799
01:03:44,070 --> 01:03:50,850
like something we would wish to encrypt but are actually files we don't mind falling into the hands

800
01:03:50,850 --> 01:04:00,510
of an adversary so to mount this partition not as a hidden operating system but as what appears to be

801
01:04:00,570 --> 01:04:02,780
a normal encrypted volume.

802
01:04:03,120 --> 01:04:09,380
We're going to launch very crypt and we're going to select any drive that is not currently in use.

803
01:04:09,450 --> 01:04:16,930
We're going to select device we're going to choose the appropriate partition and then we're going to

804
01:04:17,500 --> 01:04:20,480
mount.

805
01:04:20,550 --> 01:04:23,430
We will now enter our outer volume password

806
01:04:28,480 --> 01:04:32,800
and please notice that there is a true crypt mode that you can click on.

807
01:04:33,010 --> 01:04:38,580
If you're using a volume that was created with True Crypt one ready click OK.

808
01:04:38,590 --> 01:04:45,490
Notice that the partition has now been mounted as a Z drive and it appears to be a normal encrypted

809
01:04:45,490 --> 01:04:47,100
volume under type.

810
01:04:47,110 --> 01:04:55,820
So we go back to my computer or this P.C. we can see local disk Z and it contains the supposedly top

811
01:04:55,820 --> 01:05:00,690
secret files that we placed into it during the creation of our outer volume.

812
01:05:00,710 --> 01:05:07,790
Someone very knowledgeable about how very crypt or True Crypt works might suspect the deception but

813
01:05:07,880 --> 01:05:12,100
they will be unable to prove the existence of a hidden operating system.

814
01:05:12,110 --> 01:05:14,620
This gives you plausible deniability.

815
01:05:14,990 --> 01:05:15,990
And one last thing.

816
01:05:15,990 --> 01:05:21,350
And do not under any circumstances add or modify files on this drive.

817
01:05:21,380 --> 01:05:24,770
You run the risk of damaging your hidden operating system.

818
01:05:24,950 --> 01:05:31,010
If you need to interact with this file space at any time when you're not under any sort of a threat

819
01:05:31,430 --> 01:05:37,850
then you need to mount the drive in what is called protected mode which I will now demonstrate.

820
01:05:37,850 --> 01:05:42,900
So we're going to dismount the drive and we're going to once again click mount.

821
01:05:43,220 --> 01:05:46,340
And this time we're going to go in to mount options.

822
01:05:46,370 --> 01:05:51,340
We're going to click protected and volume against damage caused by writing to the outer volume.

823
01:05:51,380 --> 01:05:56,300
And for this we need to supply the password to our hidden operating system.

824
01:05:56,300 --> 01:05:58,860
So remember only do this when you're alone.

825
01:05:58,910 --> 01:05:59,730
You'll need to you.

826
01:05:59,750 --> 01:06:05,410
You'll need to specify a poem if you set one and you'll need to use key files.

827
01:06:05,450 --> 01:06:11,450
If you used key files and you'll only need to use key files if you specified them during the creation

828
01:06:11,480 --> 01:06:12,410
the hidden system.

829
01:06:12,440 --> 01:06:19,920
When you're ready click OK then enter the password and credentials for your outer volume click OK.

830
01:06:20,140 --> 01:06:27,140
We'll receive this message and notice that the outer volume is now revealed under type as being an outer

831
01:06:27,140 --> 01:06:27,770
volume.

832
01:06:27,800 --> 01:06:35,570
So the character of the partition is in this way revealed so again only do this when you're alone and

833
01:06:35,570 --> 01:06:37,980
only do this when you absolutely need to.

834
01:06:38,060 --> 01:06:39,160
And that's about it.

835
01:06:39,200 --> 01:06:43,910
How you use your decoy and hidden operating systems is entirely up to you.

836
01:06:43,910 --> 01:06:51,110
However I would suggest making frequent use of your decoy make it your daily driver for most of the

837
01:06:51,110 --> 01:06:56,900
things that you do only use the hidden system for activities or when dealing with data that needs to

838
01:06:56,900 --> 01:06:57,870
stay hidden.

839
01:06:57,890 --> 01:07:05,180
That way if anyone ever has cause to examine your decoy system in detail it will appear lived in a decoy

840
01:07:05,180 --> 01:07:09,080
system that is never used is going to look extremely suspicious.

841
01:07:09,080 --> 01:07:15,740
Also remember that your hidden operating system right protects things like external media to prevent

842
01:07:15,740 --> 01:07:23,240
data leaks so you may find that certain activities like transferring files via a USP is a pain while

843
01:07:23,240 --> 01:07:26,230
using the hidden operating system in a prior video.

844
01:07:26,230 --> 01:07:31,690
I gave a demonstration of how to remove the encryption for an operating system if you so desire.

845
01:07:31,700 --> 01:07:35,540
Please see that video for more information about doing that if you wish.

846
01:07:35,540 --> 01:07:42,260
However this will leave you with two windows systems installed side by side and a potentially broken

847
01:07:42,260 --> 01:07:42,970
bootloader.

848
01:07:43,040 --> 01:07:48,800
So please make sure you have a boot repair disk of some kind handy before you attempt that if at any

849
01:07:48,800 --> 01:07:51,210
point you wish to start over from scratch.

850
01:07:51,230 --> 01:07:57,770
And I do mean square one or if you just wish to securely delete all encrypted data once you're done

851
01:07:57,770 --> 01:08:04,580
using the encrypted systems please see the video later in this module covering Derek's boot and nuke

852
01:08:04,790 --> 01:08:10,730
boot and nuke will completely wipe a hard drive including its partition table and allow you to start

853
01:08:10,730 --> 01:08:15,590
fresh with the obvious catch being that all of your data will be totally erased.

854
01:08:15,590 --> 01:08:21,650
Finally it is probably worth repeating that for any of this to work you will need to disable any protected

855
01:08:21,650 --> 01:08:23,350
boot settings in your BIOS.

856
01:08:23,450 --> 01:08:29,290
If they exist this is done at your own risk and may require you to reinstall your operating system.

857
01:08:29,300 --> 01:08:36,380
It may also be possible to switch from GP t partitioning to NPR and put your bootloader into legacy

858
01:08:36,380 --> 01:08:37,190
mode.

859
01:08:37,190 --> 01:08:44,180
Again this is done in bios and Iran risk although it may make things much smoother because every version

860
01:08:44,180 --> 01:08:45,800
of bios is a little different.

861
01:08:45,800 --> 01:08:48,560
There isn't any real way to show this.

862
01:08:48,620 --> 01:08:53,170
So you may need to research the subject a bit if it is a consideration for you.

863
01:08:53,180 --> 01:08:54,340
Thank you for your attention.

