﻿1
00:00:00,750 --> 00:00:01,060
OK.

2
00:00:01,080 --> 00:00:07,650
So through all the previous lectures we see in all the weaknesses that can be used by hackers in order

3
00:00:07,650 --> 00:00:14,520
to compromise with WPA and WPA to encrypted networks we see in healthcare how they can use these weaknesses

4
00:00:14,610 --> 00:00:19,020
to crack the password and give the actual key to the network.

5
00:00:19,020 --> 00:00:25,710
We also see that attackers are able to authenticate or view this connect and the voice from any network

6
00:00:25,920 --> 00:00:29,000
without the need to know the key to that network.

7
00:00:29,490 --> 00:00:37,110
And in the previous lecture we see in how we can modify the settings of our outers so that we can increase

8
00:00:37,110 --> 00:00:43,260
the encryption of our network and increase the security of our networks so that hackers can't use the

9
00:00:43,260 --> 00:00:45,170
attacks and give the passwords.

10
00:00:47,250 --> 00:00:53,640
Now in order to fly the settings that we were talking about in the previous lecture you need to be able

11
00:00:53,640 --> 00:00:59,370
to access the settings page for your outer now eater out there has a web page where you can modify the

12
00:00:59,370 --> 00:01:00,700
settings right there.

13
00:01:00,720 --> 00:01:03,590
And it's usually at the IP of that outer.

14
00:01:03,600 --> 00:01:08,780
So first of all I'm going to check and get the IP of my computer or my device.

15
00:01:08,880 --> 00:01:11,110
And I'm just going to do if config like zero.

16
00:01:12,600 --> 00:01:16,180
And as you can see this is the IP of my computer.

17
00:01:16,380 --> 00:01:18,110
So I'm going to open my browser.

18
00:01:21,700 --> 00:01:29,910
And I'm going to now begin to 1 9 2 6 8 0 and the IP of my computer was 25.

19
00:01:30,070 --> 00:01:33,530
Usually the IP of there out there is the first IP and the subnets.

20
00:01:33,640 --> 00:01:37,300
So this is the subnets at the moment it's 1 9 2 1 6 8 0.

21
00:01:37,420 --> 00:01:41,760
And I'm just going to add number one because that's the first IP and the subset.

22
00:01:41,830 --> 00:01:44,340
And that will take me to their outer setting speech.

23
00:01:44,530 --> 00:01:48,060
And as you can see it's asking me to enter a username and a password.

24
00:01:48,080 --> 00:01:52,790
Now there is come in with pre specified username and password.

25
00:01:52,990 --> 00:01:55,490
You can check what the default username and password.

26
00:01:55,510 --> 00:01:58,660
And then I highly recommend you change them after that.

27
00:01:58,660 --> 00:02:00,840
So usually it's written in the manual.

28
00:02:00,970 --> 00:02:05,460
So check them out you'll see what's the default username and password and then you can logon.

29
00:02:09,100 --> 00:02:15,280
Now in some cases the attacker might be doing an eddy authentication attack against you so he might

30
00:02:15,280 --> 00:02:19,020
be preventing you from connecting to your network wirelessly.

31
00:02:19,080 --> 00:02:24,700
So what you can do is you can connect to your out are using a cable username either at cable and when

32
00:02:24,700 --> 00:02:29,980
you do that then the attacker can not use the authentication at that to you authenticate your or disconnect

33
00:02:29,980 --> 00:02:30,490
you.

34
00:02:30,490 --> 00:02:37,360
So you'll be able to access your other settings using the wire and then you can modify your security

35
00:02:37,360 --> 00:02:42,850
settings and change the encryption change the password do all the things that I recommended in the previous

36
00:02:42,850 --> 00:02:43,630
lecture.

37
00:02:43,780 --> 00:02:49,990
In order to increase the security so that the attacker will not be able to attack your network and get

38
00:02:49,990 --> 00:02:50,630
the key.

39
00:02:51,740 --> 00:02:54,820
Now the settings of each rotor are different.

40
00:02:54,820 --> 00:02:58,320
They depend on the manufacture and even the model of their outer.

41
00:02:58,430 --> 00:03:02,360
Well usually they see things the way that you change the settings is the same.

42
00:03:02,360 --> 00:03:07,520
And like 90 percent of the cases there are there is always the first IP of the sub net.

43
00:03:07,550 --> 00:03:13,430
So all we have to do is you get Sure IP utzon if Gothic commands like we did here like we did here on

44
00:03:13,430 --> 00:03:17,010
we go in was 9 1 9 2 1 6 8 0 25.

45
00:03:17,030 --> 00:03:18,810
That's the IP of my device.

46
00:03:18,950 --> 00:03:22,980
And then I changed the last 25 to number one to the first IP.

47
00:03:23,180 --> 00:03:25,860
And that is the IP on my right.

48
00:03:26,210 --> 00:03:30,740
Now I'm going to go to the lesser things now as you can see that there is a lot of things that you can

49
00:03:30,740 --> 00:03:35,480
change for your network and all concerned with the wireless things at the moment.

50
00:03:35,480 --> 00:03:41,350
So as you can see my wireless is enable you can change the name of the network you can change the channel.

51
00:03:42,210 --> 00:03:44,800
And the bandwidth and all that.

52
00:03:44,850 --> 00:03:46,600
So I'm going to go to the security.

53
00:03:47,190 --> 00:03:54,510
And as you can see I'm using WPA encryption with WPA or WPA to ensure authentication and the encryption

54
00:03:54,510 --> 00:03:56,660
using a s t key IP.

55
00:03:56,910 --> 00:04:06,660
And if I go on as you can see that the US is disabled as we said now so basically I'm not using web

56
00:04:06,750 --> 00:04:13,160
so they can not use any of the tags though is I spoke about that allow you to crowd them to encryption.

57
00:04:13,160 --> 00:04:18,900
I am using the loophole which is much more secure and I disable WPA.

58
00:04:18,930 --> 00:04:24,200
So they can much use reeva to determine my WPX been and then reverse engineer my password.

59
00:04:24,330 --> 00:04:29,910
The only way that the hacker can access or get my password is by staying in the handshake first and

60
00:04:29,910 --> 00:04:34,810
then use a wordlist to find my path no my password is very random.

61
00:04:34,810 --> 00:04:39,110
If that actually those in use numbers or digits just just letters.

62
00:04:39,180 --> 00:04:44,490
But it's very random So there's a really small chance of someone being able to guess that password.

63
00:04:45,510 --> 00:04:50,900
Now there is another thing I like to show you here is the access control and use of this you can add

64
00:04:50,910 --> 00:04:58,760
policies so you can add a low policy or deny policy and use it that is based on the mac address.

65
00:04:58,800 --> 00:05:02,870
You can specify a MAC address that you want to allow to connect to your network.

66
00:05:03,000 --> 00:05:08,300
You can also specify MAC addresses that you can deny from YOUR NETWORK.

67
00:05:08,310 --> 00:05:14,660
So for example you can just if you if you dont have many people many visitors coming to the house or

68
00:05:14,680 --> 00:05:20,340
if you're in a company with a specified number of computers and you want to onlly to allow a number

69
00:05:20,340 --> 00:05:24,330
of computers to connect through that network then you can just opt in.

70
00:05:24,330 --> 00:05:30,790
Ask the people good my addresses the people they want to allow and are them in an allowed list now now

71
00:05:30,990 --> 00:05:36,580
even if someone has the actual key the rifka you for your network and they dont exist in the white list

72
00:05:36,600 --> 00:05:37,830
or in the allowed list.

73
00:05:37,830 --> 00:05:40,460
They will not be able to access the network.

74
00:05:40,860 --> 00:05:47,070
You can also add in my list which is if you were you want to deny a certain computer or a certain person

75
00:05:47,070 --> 00:05:48,600
that you think are suspicious.

76
00:05:48,660 --> 00:05:54,030
You can just add the MAC address in the list and they will not be able to connect to your network.

77
00:05:55,400 --> 00:05:56,650
So this is about.

78
00:05:57,010 --> 00:06:00,190
As I said this setting space usually looks different.

79
00:06:00,190 --> 00:06:07,030
The names might be called different names as the names for each of these tabs are usually the main thing

80
00:06:07,030 --> 00:06:07,750
is you're.

81
00:06:07,780 --> 00:06:13,570
You should be able to access their outer settings using the subnet IP and the number one which is the

82
00:06:13,570 --> 00:06:20,710
first IPA and if you're being attacked if you can't connect to your network at all then just use a cable

83
00:06:20,770 --> 00:06:24,480
and modify the settings like we discussed in the previous lectures.

