WEBVTT

00:00.750 --> 00:01.060
OK.

00:01.080 --> 00:07.650
So through all the previous lectures we see in all the weaknesses that can be used by hackers in order

00:07.650 --> 00:14.520
to compromise with WPA and WPA to encrypted networks we see in healthcare how they can use these weaknesses

00:14.610 --> 00:19.020
to crack the password and give the actual key to the network.

00:19.020 --> 00:25.710
We also see that attackers are able to authenticate or view this connect and the voice from any network

00:25.920 --> 00:29.000
without the need to know the key to that network.

00:29.490 --> 00:37.110
And in the previous lecture we see in how we can modify the settings of our outers so that we can increase

00:37.110 --> 00:43.260
the encryption of our network and increase the security of our networks so that hackers can't use the

00:43.260 --> 00:45.170
attacks and give the passwords.

00:47.250 --> 00:53.640
Now in order to fly the settings that we were talking about in the previous lecture you need to be able

00:53.640 --> 00:59.370
to access the settings page for your outer now eater out there has a web page where you can modify the

00:59.370 --> 01:00.700
settings right there.

01:00.720 --> 01:03.590
And it's usually at the IP of that outer.

01:03.600 --> 01:08.780
So first of all I'm going to check and get the IP of my computer or my device.

01:08.880 --> 01:11.110
And I'm just going to do if config like zero.

01:12.600 --> 01:16.180
And as you can see this is the IP of my computer.

01:16.380 --> 01:18.110
So I'm going to open my browser.

01:21.700 --> 01:29.910
And I'm going to now begin to 1 9 2 6 8 0 and the IP of my computer was 25.

01:30.070 --> 01:33.530
Usually the IP of there out there is the first IP and the subnets.

01:33.640 --> 01:37.300
So this is the subnets at the moment it's 1 9 2 1 6 8 0.

01:37.420 --> 01:41.760
And I'm just going to add number one because that's the first IP and the subset.

01:41.830 --> 01:44.340
And that will take me to their outer setting speech.

01:44.530 --> 01:48.060
And as you can see it's asking me to enter a username and a password.

01:48.080 --> 01:52.790
Now there is come in with pre specified username and password.

01:52.990 --> 01:55.490
You can check what the default username and password.

01:55.510 --> 01:58.660
And then I highly recommend you change them after that.

01:58.660 --> 02:00.840
So usually it's written in the manual.

02:00.970 --> 02:05.460
So check them out you'll see what's the default username and password and then you can logon.

02:09.100 --> 02:15.280
Now in some cases the attacker might be doing an eddy authentication attack against you so he might

02:15.280 --> 02:19.020
be preventing you from connecting to your network wirelessly.

02:19.080 --> 02:24.700
So what you can do is you can connect to your out are using a cable username either at cable and when

02:24.700 --> 02:29.980
you do that then the attacker can not use the authentication at that to you authenticate your or disconnect

02:29.980 --> 02:30.490
you.

02:30.490 --> 02:37.360
So you'll be able to access your other settings using the wire and then you can modify your security

02:37.360 --> 02:42.850
settings and change the encryption change the password do all the things that I recommended in the previous

02:42.850 --> 02:43.630
lecture.

02:43.780 --> 02:49.990
In order to increase the security so that the attacker will not be able to attack your network and get

02:49.990 --> 02:50.630
the key.

02:51.740 --> 02:54.820
Now the settings of each rotor are different.

02:54.820 --> 02:58.320
They depend on the manufacture and even the model of their outer.

02:58.430 --> 03:02.360
Well usually they see things the way that you change the settings is the same.

03:02.360 --> 03:07.520
And like 90 percent of the cases there are there is always the first IP of the sub net.

03:07.550 --> 03:13.430
So all we have to do is you get Sure IP utzon if Gothic commands like we did here like we did here on

03:13.430 --> 03:17.010
we go in was 9 1 9 2 1 6 8 0 25.

03:17.030 --> 03:18.810
That's the IP of my device.

03:18.950 --> 03:22.980
And then I changed the last 25 to number one to the first IP.

03:23.180 --> 03:25.860
And that is the IP on my right.

03:26.210 --> 03:30.740
Now I'm going to go to the lesser things now as you can see that there is a lot of things that you can

03:30.740 --> 03:35.480
change for your network and all concerned with the wireless things at the moment.

03:35.480 --> 03:41.350
So as you can see my wireless is enable you can change the name of the network you can change the channel.

03:42.210 --> 03:44.800
And the bandwidth and all that.

03:44.850 --> 03:46.600
So I'm going to go to the security.

03:47.190 --> 03:54.510
And as you can see I'm using WPA encryption with WPA or WPA to ensure authentication and the encryption

03:54.510 --> 03:56.660
using a s t key IP.

03:56.910 --> 04:06.660
And if I go on as you can see that the US is disabled as we said now so basically I'm not using web

04:06.750 --> 04:13.160
so they can not use any of the tags though is I spoke about that allow you to crowd them to encryption.

04:13.160 --> 04:18.900
I am using the loophole which is much more secure and I disable WPA.

04:18.930 --> 04:24.200
So they can much use reeva to determine my WPX been and then reverse engineer my password.

04:24.330 --> 04:29.910
The only way that the hacker can access or get my password is by staying in the handshake first and

04:29.910 --> 04:34.810
then use a wordlist to find my path no my password is very random.

04:34.810 --> 04:39.110
If that actually those in use numbers or digits just just letters.

04:39.180 --> 04:44.490
But it's very random So there's a really small chance of someone being able to guess that password.

04:45.510 --> 04:50.900
Now there is another thing I like to show you here is the access control and use of this you can add

04:50.910 --> 04:58.760
policies so you can add a low policy or deny policy and use it that is based on the mac address.

04:58.800 --> 05:02.870
You can specify a MAC address that you want to allow to connect to your network.

05:03.000 --> 05:08.300
You can also specify MAC addresses that you can deny from YOUR NETWORK.

05:08.310 --> 05:14.660
So for example you can just if you if you dont have many people many visitors coming to the house or

05:14.680 --> 05:20.340
if you're in a company with a specified number of computers and you want to onlly to allow a number

05:20.340 --> 05:24.330
of computers to connect through that network then you can just opt in.

05:24.330 --> 05:30.790
Ask the people good my addresses the people they want to allow and are them in an allowed list now now

05:30.990 --> 05:36.580
even if someone has the actual key the rifka you for your network and they dont exist in the white list

05:36.600 --> 05:37.830
or in the allowed list.

05:37.830 --> 05:40.460
They will not be able to access the network.

05:40.860 --> 05:47.070
You can also add in my list which is if you were you want to deny a certain computer or a certain person

05:47.070 --> 05:48.600
that you think are suspicious.

05:48.660 --> 05:54.030
You can just add the MAC address in the list and they will not be able to connect to your network.

05:55.400 --> 05:56.650
So this is about.

05:57.010 --> 06:00.190
As I said this setting space usually looks different.

06:00.190 --> 06:07.030
The names might be called different names as the names for each of these tabs are usually the main thing

06:07.030 --> 06:07.750
is you're.

06:07.780 --> 06:13.570
You should be able to access their outer settings using the subnet IP and the number one which is the

06:13.570 --> 06:20.710
first IPA and if you're being attacked if you can't connect to your network at all then just use a cable

06:20.770 --> 06:24.480
and modify the settings like we discussed in the previous lectures.
