WEBVTT

00:00.730 --> 00:06.160
In the previous lecture we seen how easy it is to kreipe debut epee.

00:06.510 --> 00:13.230
All we have to do is capture enough data and then draw on aircraft energy to crack the encryption and

00:13.230 --> 00:15.480
give me the key.

00:15.480 --> 00:20.880
Now one problem that we could face is if the network is not busy.

00:21.270 --> 00:26.950
If it's not busy then the number of data will be increasing very very slowly.

00:27.000 --> 00:33.520
Therefore we're going to have to wait for a while before we have enough data to crack the key.

00:34.420 --> 00:35.990
So let me show you an example.

00:36.190 --> 00:36.940
I'm just going to run.

00:36.940 --> 00:37.210
Error.

00:37.210 --> 00:40.670
Dump energy here and list all the networks around me.

00:41.780 --> 00:47.550
And you can see I have my test network my test AP in here is in web.

00:47.720 --> 00:51.630
If you look under the data you'll see that it's at zero.

00:51.760 --> 00:53.380
And it's not increasing.

00:53.380 --> 00:59.120
And even if it's going to increase it's going to increase very very slowly which means that I'm going

00:59.120 --> 01:04.010
to have to be waiting for hours before I can crack this network.

01:04.610 --> 01:12.700
So a solution to this is to forest the AP to generate new packets with New ivie's.

01:13.540 --> 01:19.380
Now before doing this we need to associate with this network.

01:19.420 --> 01:27.370
So what I mean by associate is we need to tell this network that we want to communicate with it because

01:27.370 --> 01:36.070
by default access points ignore any requests they get unless the device has connected to this network

01:36.190 --> 01:38.370
or associated with it.

01:38.440 --> 01:41.180
So don't get this mixed up with connecting.

01:41.200 --> 01:47.230
Were still able to connect to the network because we need the password to be able to connect to the

01:47.230 --> 01:47.950
network.

01:48.130 --> 01:54.610
What were what were doing right now is literally just telling the target network look I want to communicate

01:54.640 --> 01:55.250
with you.

01:55.360 --> 01:57.280
Dont ignore my requests.

01:57.280 --> 01:59.090
Thats all were doing it.

01:59.620 --> 02:04.660
So its something similar to what happens when you just click on the network when you want to connect

02:04.660 --> 02:05.220
to it.

02:05.290 --> 02:09.200
You still have to put the password you're just in the target network.

02:09.220 --> 02:11.210
I want to communicate with you.

02:11.230 --> 02:13.330
Please don't ignore me.

02:14.370 --> 02:20.880
So in this lecture I'm going to show you how to associate with the target network so we can communicate

02:20.880 --> 02:21.500
with it.

02:21.630 --> 02:29.760
And in the next lecture I'm going to show you how I was associated We can inject packets into the network

02:30.060 --> 02:35.190
and forest the number of data to increase very very quickly.

02:36.240 --> 02:43.200
First I'm going to run over them and against my target network which has this BSA cida So I'm going

02:43.200 --> 02:48.640
to copy it and we're going to use the exact same command that we have been using so far.

02:48.780 --> 02:50.860
So we're going to do it or dump and G.

02:51.720 --> 02:52.380
That should I should.

02:52.430 --> 02:53.940
Yes yes I did.

02:53.970 --> 02:57.270
Followed by the mike address of my tower did that.

02:57.270 --> 02:58.410
That ash Channel.

02:59.410 --> 03:04.030
Followed by the channel which my target is running go on which is six.

03:04.390 --> 03:10.110
And we were going to store all of this so we're going to do a dash dash right and we'll call this file

03:10.480 --> 03:14.520
a our AP replay because thus the name of the attack.

03:14.740 --> 03:19.680
And then I'm going to put my wireless adapter in monitor mode which is zero.

03:20.730 --> 03:26.720
So a very simple command that we'd done before were using error dump energy to capture data from our

03:26.720 --> 03:30.310
network with this MAC address running on this channel.

03:30.330 --> 03:34.430
We're a story in everything and a file called arpu a play.

03:35.420 --> 03:36.990
I'm going to have a..

03:37.000 --> 03:40.450
And as you can see it's running against my target.

03:40.450 --> 03:47.350
I noticed that there is increasing really really slow or it's actually not increasing at all right now.

03:48.500 --> 03:55.390
Now to associate with this network will it go on to use a program called Air replay energy.

03:55.700 --> 04:01.560
So we're going to type a reply energy followed by a dash dash fake.

04:01.610 --> 04:05.070
Because we want to do a fake authentication attack.

04:06.000 --> 04:11.170
We're going to with zero because we all knew what to do with this once we were going to do a dash 8

04:11.170 --> 04:14.780
to specified the Mac address of the target network.

04:14.780 --> 04:17.770
So I'm going to paste it I've already copied it.

04:17.960 --> 04:25.490
Then we're going to do a dash page to specify the Mac address of my wireless adapter and to get the

04:25.490 --> 04:27.940
MAC address of my wireless adapter.

04:27.970 --> 04:29.730
I'm going to do if config.

04:31.200 --> 04:35.580
It's the first 12 digits of the unspeak field.

04:35.580 --> 04:42.000
Usually you'd see it after the other but when you enable monitor mode it'll show up like so.

04:43.200 --> 04:44.860
So I'm going to copy this.

04:46.500 --> 04:48.040
I'm going to paste it here.

04:49.390 --> 04:52.620
And I'm going to replace the minuses with.

04:52.610 --> 04:53.500
Call on.

04:54.750 --> 04:55.630
And that's it.

04:55.680 --> 04:56.580
It's done.

04:56.850 --> 05:03.580
And finally I'm just going to give the name of my wireless adapter in monitor mode.

05:04.910 --> 05:06.580
So a very simple command.

05:06.590 --> 05:12.160
We use an aeroplane engine which is a tool that can be used to run a number of attacks and we see news

05:12.170 --> 05:16.500
seen this with the authentication attack were still at it.

05:16.550 --> 05:19.740
We want to run a fake authentication attack.

05:19.850 --> 05:27.300
We want to do with this once we are giving it the MAC address of my target network after the A.

05:27.710 --> 05:32.870
Then I'll give it the MAC address of my wireless adapter after the rage.

05:32.990 --> 05:37.960
And finally I'm giving it my wireless adapter in monitor mode.

05:38.390 --> 05:45.200
Now before I run this notice in here under the off we have nothing and we don't have any clients show

05:45.230 --> 05:47.060
up in here at the bottom.

05:47.890 --> 05:56.310
No if I hit enter you can see under the earth it's showing up as open and you can see we have a new

05:56.310 --> 05:59.920
client here associated with the network.

06:00.030 --> 06:04.690
If you look in here you'll see this is the MAC address of my target network.

06:04.770 --> 06:09.510
And right here is the MAC address of my wireless adapter.

06:09.810 --> 06:13.210
So right now I am associated with the terrorist network.

06:13.320 --> 06:20.110
And if I send it anything it's going to accept it and it's going to communicate with me again.

06:20.130 --> 06:22.040
I am not connected to the network.

06:22.050 --> 06:23.860
I still can't use the Internet.

06:23.880 --> 06:29.240
I'm literally just associated with the network so I can communicate with it.

06:30.490 --> 06:37.360
Now in the next lecture I'm going to show you how we can communicate with this network in a way to force

06:37.360 --> 06:45.110
it into generating new packets with New ivie's which will allow us to crack the key very very quickly.
