WEBVTT

00:01.230 --> 00:07.490
Any previous lectures we seen have to crack the debut epee encryption in minutes even if the target

00:07.490 --> 00:10.000
network is not busy.

00:10.400 --> 00:15.220
Now the next lecture as we will talk about cracking WPA.

00:15.290 --> 00:17.460
Debbie you too.

00:17.810 --> 00:23.900
First of all before we start talking about how to create these encryptions it is very important to understand

00:24.170 --> 00:27.050
that both of them are very very similar.

00:27.050 --> 00:34.660
The only difference between them is the encryption used to ensure message integrity WPA uses the key

00:34.790 --> 00:39.890
IP and WPA to uses an encryption called S.C MP.

00:40.540 --> 00:45.680
In any case this does not affect the methods that were going to use to cry.

00:45.940 --> 00:53.170
You pay a WPA to therefore all of the methods that I'm going to show you from now on will work on both

00:53.350 --> 01:02.920
WPA and WPA to know both of these encryption's came after W E P and they were designed to address the

01:02.920 --> 01:10.940
weaknesses and therefore both of them are much more secure and cracking them is more challenging.

01:11.500 --> 01:18.640
So before we start talking about how to crack them I want to cover a feature that if enabled and mis

01:18.640 --> 01:27.400
configured can be exploited to recover the key without having to crack the actual encryption the feature

01:27.400 --> 01:29.290
is called WPX.

01:29.320 --> 01:34.520
It allows devices to connect to the network easily without having to enter it.

01:34.540 --> 01:36.620
The key for the network.

01:36.780 --> 01:42.460
So it was designed to simplify the process of connecting printers as source devices.

01:43.010 --> 01:48.450
You can actually see a WPX button on most wireless enabled printers.

01:48.590 --> 01:54.860
If this button is pressed and then you press the WPX button on the rafter you'll notice that the printer

01:55.010 --> 01:59.750
will connect to the rafter without you having to enter the key.

01:59.750 --> 02:06.740
This way the authentication is done using an eight digit pin so you can think of this as a password

02:06.950 --> 02:12.570
made up of ONDI numbers and the length of this password is onlly aid.

02:12.590 --> 02:18.800
So this actually gives us a relatively small list of possible passwords and we can try all of these

02:18.800 --> 02:24.570
possible passwords within a relatively short time was very good this pin.

02:24.570 --> 02:30.010
It can be used to recover the actual WPA or WPA to keep.

02:31.030 --> 02:37.900
So as you can see with this method we are not exploiting WPA or WPA to we are actually exploiting a

02:37.900 --> 02:42.210
feature that can be enabled on these encryptions.

02:42.490 --> 02:48.910
So for this to work first of all we need WPX to be enabled on the network because it can be disabled.

02:49.330 --> 02:56.350
Also it needs to be mis configured so it needs to be configured to use a normal pin authentication and

02:56.350 --> 02:57.600
not a push button.

02:57.610 --> 03:05.020
Authentication if push button authentication is used then the rafter will refuse any pins that we try

03:05.290 --> 03:08.790
unless the WPX button is pressed on thereafter.

03:09.220 --> 03:14.110
Therefore the methods will not work if push button or apbt is enabled.

03:14.650 --> 03:21.560
So in most modern routers P B C comes enable by default or WPX will be disabled by default.

03:21.670 --> 03:29.950
So this method might not work but because WPA and WPA too are so secure and so challenging it is always

03:29.950 --> 03:36.700
a good idea to check if WP SS enabled and tried the method then I'm going to show you to the network.

03:36.700 --> 03:39.430
If it fails then you can try the other methods.

03:39.540 --> 03:42.110
I'm going to show you after the next lecture.
