WEBVTT

00:01.140 --> 00:09.600
Now if WPX is disabled on your target network or if it's enable but configure to use push button or

00:09.600 --> 00:15.080
P B C then the method that I showed you in the previous lecture will not work.

00:15.480 --> 00:22.630
Therefore you will have to go and crack the actual WPA or WPA to encryption.

00:22.630 --> 00:28.560
And like I said when these encryption's were designed the developers knew about the weaknesses in their

00:28.570 --> 00:33.440
new epee and they made sure that they properly fix these weaknesses.

00:33.690 --> 00:36.120
They actually did a pretty good job at this.

00:36.120 --> 00:43.510
Therefore we can not use the same method used in the epee to crack their beaupré and WPA too.

00:44.660 --> 00:47.850
So in WPA through the key is are unique.

00:47.940 --> 00:48.910
They're temporary.

00:48.950 --> 00:52.300
They're much longer than what they wear in the epee.

00:52.430 --> 01:01.840
Therefore the packets sent in the air contained no information that is useful for us so it doesn't matter

01:01.850 --> 01:04.130
even if we capture one million packets.

01:04.220 --> 01:07.620
We can't use them to crack the key.

01:07.940 --> 01:13.090
The money packets that contain useful information are the handshake packets.

01:14.120 --> 01:18.570
These are four packets transferred between a client and the rafter.

01:18.680 --> 01:21.360
When the client connects to the network.

01:22.070 --> 01:26.500
So in this lecture I'm going to show you how to capture this packets.

01:26.540 --> 01:33.720
And in the next lectures we'll see how to use them to crowd the WPA or a WPA to keep.

01:34.610 --> 01:40.300
First of all as usual you had one Iran Iraq Dungey against all the networks around you.

01:40.340 --> 01:41.700
I've already done that.

01:41.820 --> 01:44.510
And as you can see this is my target right here.

01:44.540 --> 01:46.420
It's use in WPA too.

01:47.240 --> 01:49.050
And this is the MAC address.

01:49.150 --> 01:50.330
I'm going to copy it.

01:51.830 --> 01:57.380
And the first thing we'll do is just run air or dump energy on this network and study the data in a

01:57.380 --> 02:02.300
file exactly the same way that we used to do it with their blue epee.

02:02.810 --> 02:10.880
So we're just going to do error dump energy dash dash B s s idea and give it the BSA idea of my target

02:11.750 --> 02:13.090
dash dash Channel.

02:14.060 --> 02:17.300
And give it the channel of my target which is one.

02:18.350 --> 02:24.410
That that's right to specify a file name to store all the data that were going to capture em.

02:24.590 --> 02:29.230
And let's call this WP a handshake.

02:30.260 --> 02:32.730
Because we're going to capture the handshake.

02:32.900 --> 02:38.770
And finally we're going to give it my wife said that after in monitoring mode which is morning zero.

02:39.260 --> 02:40.830
So very simple command.

02:40.840 --> 02:43.160
We've done this multiple times now.

02:43.250 --> 02:49.420
We use an error on energy were it given the MAC address of my tarrega it after the B.S. aside the UM

02:49.430 --> 02:55.870
given it dash dash channel to specify the channel of my target and use in dash dash right to store all

02:55.880 --> 02:56.700
the data.

02:56.750 --> 03:03.670
File this file contains everything that we capture so we captured how Chegg it'll be in this file.

03:04.070 --> 03:08.930
And finally I'm giving it the name of my wireless adapter in waiter mode.

03:09.320 --> 03:10.950
So now I'm going to hit enter.

03:11.240 --> 03:16.170
And as you can see error Energy is working against my Target's network.

03:16.520 --> 03:23.210
Right now all we have to do is literally sit down and wait for the handshake to be captured.

03:23.210 --> 03:28.310
Like I said the handshake is sent when a client connects to the network.

03:28.400 --> 03:34.370
So we literally have to sit down and wait until a new client connected the network wants a new client

03:34.420 --> 03:40.550
connects we will capture the handshake and you will see in here is a them telling us that the handshake

03:40.550 --> 03:41.930
has been captured.

03:42.900 --> 03:50.550
Tentatively we can use something that we learned before which is the authentication attack we know we

03:50.550 --> 03:56.430
use in that attack we can disconnect the client from the network so we can do this for a very short

03:56.430 --> 03:57.380
period of time.

03:57.390 --> 04:00.330
We can disconnect this client from the network.

04:00.330 --> 04:02.550
He will automatically Kinect.

04:02.610 --> 04:04.310
Once we stop the attack.

04:04.680 --> 04:10.710
Therefore when he automatically connects the handshake will be sent in the air and we will be able to

04:10.710 --> 04:11.910
capture it.

04:11.910 --> 04:17.790
This way we will not have to sit down and wait for someone to voluntarily connect to the network.

04:19.320 --> 04:24.560
So we see now to do this before is this going to be exactly the same command as we did it before.

04:24.590 --> 04:26.360
Were you in a play and you.

04:27.640 --> 04:28.540
We did that.

04:28.550 --> 04:29.660
They actually are.

04:31.050 --> 04:38.060
Then we specified a really low number of packets to keep the client disconnected for a long period of

04:38.060 --> 04:39.100
time.

04:39.140 --> 04:44.940
This time I'm going to send this to for two of you send Florida authentication packets.

04:45.080 --> 04:49.360
This way my client will be disconnected for a very short period of time.

04:49.400 --> 04:52.170
They won't even feel that they got this connected.

04:52.310 --> 04:56.530
But this is enough for the handshake to be sent because they will be disconnected.

04:56.570 --> 05:01.260
They will automatically connect and when they do that we will capture the handshake.

05:02.400 --> 05:06.840
Now the next argument we want to set is the MAC address of my target.

05:06.930 --> 05:11.160
So we're going to do a dash a followed by the MAC address of my target.

05:11.250 --> 05:17.130
Then were going to do dashi followed by the MAC address of the client that we want to disconnect.

05:17.220 --> 05:20.780
So as this client right here I'm going to copy.

05:21.700 --> 05:22.930
Pasted here.

05:23.110 --> 05:27.770
And finally we are going to give it the name of my wireless adapter in I you to.

05:27.770 --> 05:29.850
Mode which is more than zero.

05:31.050 --> 05:33.130
And we are done again.

05:33.150 --> 05:35.430
I've spent a full lecture on this command.

05:35.430 --> 05:38.080
Explain what a authentication attack is.

05:38.190 --> 05:39.920
So it's a bit confusing.

05:39.930 --> 05:40.850
Please go back.

05:40.940 --> 05:42.750
Why's that lecture.

05:42.840 --> 05:47.910
Basically all we're doing is where are you as an aeroplane and you two are on the authentication at

05:47.920 --> 05:52.240
work to disconnect this device for a very short period of time.

05:52.290 --> 05:58.620
That's why I'm setting this too ONDI number four then I'm using dash 8 to specify the MAC address of

05:58.620 --> 05:59.610
my target.

05:59.830 --> 06:06.690
I see specified the MAC address of the client connected to this network and then given it my wireless

06:06.690 --> 06:09.520
adapter in monitor mode.

06:09.570 --> 06:13.580
Now I'm going to hit enter and keep an eye on this side right here.

06:13.590 --> 06:16.570
You'll see the high check will be captured in here.

06:17.030 --> 06:24.540
So go ahead and tell the authentication packets being scanned and perfect as you can see you wants the

06:24.540 --> 06:25.780
client connected.

06:25.800 --> 06:28.720
Again we receive the handshake.

06:29.820 --> 06:31.310
So now we can quit.

06:31.350 --> 06:32.480
Ere are done and you.

06:32.490 --> 06:36.090
So controller see you because we have the handshake now.

06:36.220 --> 06:43.600
It is in the file that we set after the right option which is called WPA a handshake and the next lecture.

06:43.680 --> 06:48.700
I'll show you how this had she can be used to get the key for the network.
