1 00:00:01,880 --> 00:00:09,220 Using a virtual machine we are not limited only to emulated or virtualise the hardware. 2 00:00:09,450 --> 00:00:14,990 We can pass it in hardware from the host machine directly to the guest as well. 3 00:00:16,160 --> 00:00:20,130 Let's take a look at using our U.S. we drive. 4 00:00:20,420 --> 00:00:27,140 We could just as easily use the US we've got a webcam or a printer or something else. 5 00:00:28,010 --> 00:00:35,600 I would check them my guest all-British system and then I will go into the setting and use us be on 6 00:00:35,600 --> 00:00:36,110 a Mac. 7 00:00:36,110 --> 00:00:40,000 You will find the under the old settings. 8 00:00:41,440 --> 00:00:45,730 I can choose to use US me one dog one. 9 00:00:45,790 --> 00:00:46,820 You asked me. 10 00:00:47,030 --> 00:00:49,440 You ask me three controller. 11 00:00:49,900 --> 00:00:56,800 Yes me one going to one is the default because to enable the other do we need to have installed a virtual 12 00:00:56,800 --> 00:01:00,330 box extension back. 13 00:01:00,360 --> 00:01:03,170 We did that hardly an hour lectures. 14 00:01:03,360 --> 00:01:12,830 But if you see an end of the next two or three here you will need to check to make sure you have it 15 00:01:12,830 --> 00:01:14,420 installed. 16 00:01:14,510 --> 00:01:20,770 You can still use me without them but only the slow one blind one Sternbergh. 17 00:01:22,050 --> 00:01:32,500 I'll plug my yes we drive into my system the vaguely I believe device to the guest is by using a filter. 18 00:01:33,270 --> 00:01:40,810 Us with devices have manufactured and model codes which is code the system can't tell them apart. 19 00:01:43,580 --> 00:01:51,530 On here on the right side of the list I have two option enabled us to be ACORN with the blue circle 20 00:01:51,590 --> 00:02:01,980 and one with the green plus the button with the Blues creates an empty hole that is a filter with no 21 00:02:01,980 --> 00:02:03,220 information. 22 00:02:03,980 --> 00:02:11,630 And late I read one and then click on the board button then click on the button with the yellow circle 23 00:02:11,630 --> 00:02:14,560 to activate no information. 24 00:02:14,570 --> 00:02:22,030 I don't know this information about my drive so I will close out of here and delete this filter using 25 00:02:22,030 --> 00:02:30,490 a button with that egg minus the button to get the green plus lets me choose a device that plugged in 26 00:02:30,490 --> 00:02:40,800 to make a filter for I will choose my flash drive from the least I know if I did what is what it's like 27 00:02:40,870 --> 00:02:41,860 here. 28 00:02:42,390 --> 00:02:50,010 This specific information for the software to identify my drive with this will turn in place when the 29 00:02:50,010 --> 00:02:51,300 guest starter. 30 00:02:51,450 --> 00:02:53,970 It will look back on the hardware to itself 31 00:02:57,070 --> 00:02:59,130 effectively begin 8. 32 00:02:59,170 --> 00:03:08,260 Right then we can also get them ready and politically add or remove us devices from the guest by selecting 33 00:03:08,290 --> 00:03:11,940 or selecting them from the menu up here. 34 00:03:13,380 --> 00:03:21,150 And their devices and us we are from the U.S. be acorn on the status by adding a device this way we 35 00:03:21,150 --> 00:03:25,780 will try again control of it from the host of any system. 36 00:03:26,270 --> 00:03:28,010 But that does not always work. 37 00:03:28,020 --> 00:03:30,380 Be sure to check that. 38 00:03:30,660 --> 00:03:40,170 The host is using a device before you give control of it to the guest if you don't need the gas to automatically 39 00:03:40,170 --> 00:03:41,740 connect to device. 40 00:03:41,790 --> 00:03:47,030 You can disable or delete the filter from the filter list in the USP settings. 41 00:03:47,870 --> 00:03:51,380 For the system but no I really liked this. 42 00:03:51,400 --> 00:03:52,040 Dr..