1 00:00:07,950 --> 00:00:12,270 All right, so in the last lecture, we downloaded the bits for open sets. 2 00:00:12,780 --> 00:00:18,360 Now we're going to configure the appliance and really we don't need to do two things. 3 00:00:18,510 --> 00:00:22,020 One, assign the interfaces and to set the interface IP address. 4 00:00:22,590 --> 00:00:30,570 So let's first assign the interface press one and we can see M0 and again, one, if you see the Mac 5 00:00:30,570 --> 00:00:34,070 address, seven seven four seven four zero zero zero. 6 00:00:34,080 --> 00:00:41,880 What, we can click on the adapter and go to settings for the bridge that after we were advanced seven 7 00:00:41,890 --> 00:00:42,500 seven four seven. 8 00:00:42,870 --> 00:00:44,600 So that is our adapter. 9 00:00:45,000 --> 00:00:47,100 So it says, do you want to configure violence now? 10 00:00:47,490 --> 00:00:50,780 No, enter the window interface name. 11 00:00:51,540 --> 00:00:54,150 That would be M0, as we've just confirmed. 12 00:00:54,960 --> 00:00:55,770 And then it's going to say. 13 00:00:55,770 --> 00:00:56,190 All right. 14 00:00:57,170 --> 00:01:03,860 Into the land interface name for nothing, the land interface name is going to be item one and then 15 00:01:03,860 --> 00:01:07,070 the optional interface, we're not going to be using that to what to say enter. 16 00:01:07,350 --> 00:01:14,060 If you were creating a DMZ, you can figure that one and then Opti would be your DMZ interface, saying 17 00:01:14,060 --> 00:01:16,080 these are the interface assignments that we want to proceed. 18 00:01:16,100 --> 00:01:16,760 Yes, we do. 19 00:01:18,260 --> 00:01:23,490 And they should finish in just a few seconds and then we'll move on to setting the interface IP addresses. 20 00:01:24,260 --> 00:01:25,050 All right, very good. 21 00:01:25,070 --> 00:01:27,890 So you can see the IPS for and when it's not really what we want. 22 00:01:27,890 --> 00:01:28,130 Right. 23 00:01:28,130 --> 00:01:29,640 Because the land needs to be in attendance. 24 00:01:29,720 --> 00:01:32,860 100 zero dark zero 24 network. 25 00:01:33,650 --> 00:01:39,920 So let's go to set and IP, the number two set interface IP address into the number of the interface 26 00:01:39,920 --> 00:01:46,940 to configure so we can start with the land and we're not going to configure DCP Y because we're going 27 00:01:46,940 --> 00:01:51,230 to use our 10.1 that zero dot 50 DNS provider. 28 00:01:51,320 --> 00:01:51,640 Right. 29 00:01:51,650 --> 00:01:52,970 Irwindale, 1719. 30 00:01:53,570 --> 00:01:54,530 That has the Dienes roll. 31 00:01:55,210 --> 00:02:01,760 So enter the LAN IP for address 10 100 zero dot one into the subnet. 32 00:02:02,000 --> 00:02:03,050 It's going to be a 24 bit. 33 00:02:03,210 --> 00:02:05,720 You can see that activity activity activity five. 34 00:02:06,170 --> 00:02:08,300 If you have questions about that, look at the earlier lectures. 35 00:02:08,300 --> 00:02:12,920 We we talked about something in great detail and this is the Glan interface that will press enter for 36 00:02:12,920 --> 00:02:13,250 none. 37 00:02:14,030 --> 00:02:15,620 And we're not going to configure IPV six. 38 00:02:17,150 --> 00:02:21,440 So no for all that and then we're just going to hit enter. 39 00:02:21,770 --> 00:02:22,090 All right. 40 00:02:22,110 --> 00:02:24,510 And do you want to enable the server on Islan? 41 00:02:24,530 --> 00:02:25,250 No, we don't. 42 00:02:27,980 --> 00:02:35,360 Do you want to revert to HTP now we can continue using HDB, so let's, you know, generate a new self 43 00:02:35,360 --> 00:02:37,340 signed Web GUI certificate. 44 00:02:37,400 --> 00:02:43,040 Nopal is the one that exists and will we will restore the web going to the defaults. 45 00:02:45,680 --> 00:02:52,250 All right, so now you can see 10, 100, zero one is going to be the gooey interface that we just need 46 00:02:52,250 --> 00:02:53,240 to configure the wind part. 47 00:02:54,250 --> 00:03:00,040 So one more time ago to set Elvis I.P. address number two into the number of the interface we wanted 48 00:03:00,040 --> 00:03:03,580 during this time and this time, we do want to use the HCB. 49 00:03:04,090 --> 00:03:10,210 You know, I want my home router to assign a DCB address to the external interface of this appliance. 50 00:03:11,590 --> 00:03:13,540 So it's easier just to set this up with the HCB. 51 00:03:13,550 --> 00:03:18,340 So I'm going to say yes, and then we're just going to say no to all the IPV six stuff. 52 00:03:20,660 --> 00:03:21,890 Do you want to revert to TDP? 53 00:03:21,920 --> 00:03:22,820 No, I don't. 54 00:03:25,530 --> 00:03:27,930 And all of this is basically the same as the first adapter. 55 00:03:32,850 --> 00:03:33,370 Very cool. 56 00:03:33,390 --> 00:03:34,500 So this is looking pretty good. 57 00:03:34,530 --> 00:03:38,280 Let's just make sure everything works, we're going to hit seven tipping host and we're going to put 58 00:03:38,280 --> 00:03:41,010 in Google to see if we can ping Google and we can. 59 00:03:41,040 --> 00:03:41,860 So that's a really good sign. 60 00:03:42,720 --> 00:03:43,950 That's all we're going to do in this lecture. 61 00:03:43,950 --> 00:03:50,700 In the next one, we're going to install BMR tools and also we're going to download Sensa onto this 62 00:03:50,700 --> 00:03:52,020 box all from the Komala. 63 00:03:52,030 --> 00:03:52,800 It's going to be really cool. 64 00:03:53,190 --> 00:03:53,430 All right. 65 00:03:53,440 --> 00:03:55,020 I'll see you guys in the next lecture by.