1
00:00:01,340 --> 00:00:03,260
Let's take a look at some of the other options that we

2
00:00:03,260 --> 00:00:05,840
have inside Windows Deployment Services.

3
00:00:05,840 --> 00:00:09,170
If I right‑click on the server and go to Properties,

4
00:00:09,170 --> 00:00:13,290
then I can change some of the defaults that were created during installation,

5
00:00:13,290 --> 00:00:16,110
such as the PXE or PXE Response.

6
00:00:16,110 --> 00:00:19,710
That's the pre‑execution environment when you boot up the computer.

7
00:00:19,710 --> 00:00:23,240
And I chose to respond to all client computers,

8
00:00:23,240 --> 00:00:24,360
known and unknown.

9
00:00:24,360 --> 00:00:28,730
If you choose to change that to only‑known client

10
00:00:28,730 --> 00:00:32,660
computers or not to respond to any, in case you're not ready to respond,

11
00:00:32,660 --> 00:00:34,770
then you can certainly make that change here.

12
00:00:34,770 --> 00:00:38,240
You can also change the PXE or PXE Response Delay.

13
00:00:38,240 --> 00:00:40,790
If it shows 0 seconds,

14
00:00:40,790 --> 00:00:44,270
it actually is going to take about a minute before it fails,

15
00:00:44,270 --> 00:00:49,150
and then it will try to boot from one of the other devices in the boot order.

16
00:00:49,150 --> 00:00:52,450
You could change this to a specific amount of time,

17
00:00:52,450 --> 00:00:56,940
such as 15 seconds, or 30 seconds, whatever it is that you'd like.

18
00:00:56,940 --> 00:01:04,440
You could change this to 15 seconds or 25 seconds, anything up to 28 seconds.

19
00:01:04,440 --> 00:01:07,300
We can also go to Active Directory Domain Services,

20
00:01:07,300 --> 00:01:10,540
and here we can see the computer account location.

21
00:01:10,540 --> 00:01:14,330
So when we join this particular computer into the domain,

22
00:01:14,330 --> 00:01:18,330
it's going to create a computer account in the same domain as

23
00:01:18,330 --> 00:01:20,120
the Windows Deployment Services server.

24
00:01:20,120 --> 00:01:23,290
You could change that to the same domain as the user performing the

25
00:01:23,290 --> 00:01:26,930
installation in case they're a part of a different domain or the same

26
00:01:26,930 --> 00:01:29,710
organizational unit or the following location.

27
00:01:29,710 --> 00:01:32,750
So if you have another Active Directory Domain or forest,

28
00:01:32,750 --> 00:01:34,160
then you can choose that here.

29
00:01:34,160 --> 00:01:36,700
I'm going to leave it the same and click on Boot.

30
00:01:36,700 --> 00:01:40,620
Here we have the option to require the user to press F12 to

31
00:01:40,620 --> 00:01:44,970
continue for both known and unknown computers or just to

32
00:01:44,970 --> 00:01:48,240
always continue on with the PXE boot.

33
00:01:48,240 --> 00:01:50,930
You could change that to force them to press the F12

34
00:01:50,930 --> 00:01:54,090
key or choose to continue the boot,

35
00:01:54,090 --> 00:01:58,840
unless the user presses Esc or to never continue the PXE boot.

36
00:01:58,840 --> 00:02:02,190
Then you have the option for putting in default boot images.

37
00:02:02,190 --> 00:02:03,640
This is optional, as you see.

38
00:02:03,640 --> 00:02:06,950
You can do this for other types of images other than just a

39
00:02:06,950 --> 00:02:09,690
standard x86 architecture if you'd like.

40
00:02:09,690 --> 00:02:16,390
When we go over to the Client, we can specify an unattended installation file,

41
00:02:16,390 --> 00:02:19,930
so that way we'll automatically answer all the different things,

42
00:02:19,930 --> 00:02:22,950
such as the computer name, whether or not the firewall's turned on,

43
00:02:22,950 --> 00:02:27,070
and in any one of 100 different things that you can set up

44
00:02:27,070 --> 00:02:31,650
using the Windows automated deployment kit that you can

45
00:02:31,650 --> 00:02:33,640
install on one of the computers.

46
00:02:33,640 --> 00:02:36,840
If you choose to not join the client computer to the domain,

47
00:02:36,840 --> 00:02:38,190
then you can choose that as well.

48
00:02:38,190 --> 00:02:42,440
It will just add the computer in, but not add it into the domain.

49
00:02:42,440 --> 00:02:45,940
And in case you're having any trouble, you may want to enable logging,

50
00:02:45,940 --> 00:02:48,540
which is not enabled by default, but I went ahead and checked.

51
00:02:48,540 --> 00:02:51,670
This will log all the information, errors,

52
00:02:51,670 --> 00:02:53,800
warnings, if you choose this particular option,

53
00:02:53,800 --> 00:02:55,820
or you can choose a lesser version.

54
00:02:55,820 --> 00:03:00,390
When we go into DHCP, this is an area where you want to check the boxes,

55
00:03:00,390 --> 00:03:03,570
but only if a couple of things are going on.

56
00:03:03,570 --> 00:03:06,940
One is if you're not using a Windows DHCP server,

57
00:03:06,940 --> 00:03:09,260
then you can check one of those boxes.

58
00:03:09,260 --> 00:03:10,010
Otherwise,

59
00:03:10,010 --> 00:03:14,770
you can check both boxes if the DHCP server is on the Windows Deployment server,

60
00:03:14,770 --> 00:03:16,340
which mine is not.

61
00:03:16,340 --> 00:03:20,410
When going into Multicast, you can use the Obtain IP address from DHCP,

62
00:03:20,410 --> 00:03:23,180
or you can use specific addresses.

63
00:03:23,180 --> 00:03:25,440
When you choose a multicast option,

64
00:03:25,440 --> 00:03:27,980
the deployment sends one network transmission to

65
00:03:27,980 --> 00:03:30,740
multiple WDS clients all at once,

66
00:03:30,740 --> 00:03:33,690
and this is going to reduce the network bandwidth.

67
00:03:33,690 --> 00:03:38,030
This can be very useful if you're having many different clients all

68
00:03:38,030 --> 00:03:42,410
connecting to the Windows Deployment Services server all at once.

69
00:03:42,410 --> 00:03:45,910
When we go into Advanced under Domain Controller,

70
00:03:45,910 --> 00:03:49,740
we can choose the option for allow Windows Deployment Services

71
00:03:49,740 --> 00:03:53,470
to dynamically discover the valid domains.

72
00:03:53,470 --> 00:03:56,400
If it doesn't work, then you can go in here,

73
00:03:56,400 --> 00:03:58,440
and you can manually select them,

74
00:03:58,440 --> 00:04:02,490
and you also have the option under DHCP Authorization to

75
00:04:02,490 --> 00:04:05,130
either do not authorize this Windows Deployment Services

76
00:04:05,130 --> 00:04:07,540
server in DHCP or to authorize it.

77
00:04:07,540 --> 00:04:09,840
It's a good idea to set that to authorize.

78
00:04:09,840 --> 00:04:13,860
Then under Network, we have Obtain dynamic ports from Winsock.

79
00:04:13,860 --> 00:04:15,640
This is typically the best way to go.

80
00:04:15,640 --> 00:04:18,340
But if you're using ports that are in the upper range,

81
00:04:18,340 --> 00:04:20,340
you can manually set them here.

82
00:04:20,340 --> 00:04:22,890
And lastly, we have TFTP,

83
00:04:22,890 --> 00:04:26,640
and this is used to load and install the operating system.

84
00:04:26,640 --> 00:04:30,790
So the TFTP is already a part of Windows Deployment Services.

85
00:04:30,790 --> 00:04:32,400
If you understand block size,

86
00:04:32,400 --> 00:04:34,790
you can go ahead and play with that and make some changes,

87
00:04:34,790 --> 00:04:37,270
but typically you would leave that just the way it is,

88
00:04:37,270 --> 00:04:39,640
as well as the variable‑window extension.

89
00:04:39,640 --> 00:04:44,040
If you like the changes that you made, you can click Apply and OK, or just OK.

90
00:04:44,040 --> 00:04:48,480
I'm going to go down here also to the Wind10 install

91
00:04:48,480 --> 00:04:52,290
images group, I'm going to right‑click, and I want to show you Security.

92
00:04:52,290 --> 00:04:53,410
Because, by default,

93
00:04:53,410 --> 00:04:58,190
this Security is set up in a way that pretty much anyone can use it.

94
00:04:58,190 --> 00:04:59,440
If that's not what you want,

95
00:04:59,440 --> 00:05:03,340
then you can go in and change Authenticated Users to either not allow

96
00:05:03,340 --> 00:05:07,470
or be denied to go ahead and access these images.

97
00:05:07,470 --> 00:05:11,200
You can also add in specific groups or users and give

98
00:05:11,200 --> 00:05:13,090
them control if you'd like as well.

99
00:05:13,090 --> 00:05:15,410
What I recommend is that you keep your Windows

100
00:05:15,410 --> 00:05:18,390
Deployment Services set up in its own subnet,

101
00:05:18,390 --> 00:05:22,310
and that way, no one else is going to be able to connect to it,

102
00:05:22,310 --> 00:05:25,380
and you won't have to worry about any type of security

103
00:05:25,380 --> 00:05:27,830
issues and having to make any changes here.

104
00:05:27,830 --> 00:05:30,740
I'm going to go down to where it says Drivers,

105
00:05:30,740 --> 00:05:34,370
and we can see there are All Packages and a DriverGroup.

106
00:05:34,370 --> 00:05:37,360
So if I right‑click on the DriverGroup1,

107
00:05:37,360 --> 00:05:41,060
I can go to Properties, and we can see that the status is enabled,

108
00:05:41,060 --> 00:05:44,720
and it's going to have driver packages matching client hardware.

109
00:05:44,720 --> 00:05:48,230
This allows us to have specific drivers for hardware.

110
00:05:48,230 --> 00:05:52,270
It's most commonly used with things that don't automatically come

111
00:05:52,270 --> 00:05:55,520
with Windows Server or Windows 10 operating systems,

112
00:05:55,520 --> 00:05:59,030
such as specific types of printers, RAID controllers,

113
00:05:59,030 --> 00:05:59,940
things like that.

114
00:05:59,940 --> 00:06:01,930
Here you can go ahead and add those in,

115
00:06:01,930 --> 00:06:05,190
just click on Add and locate the driver packages,

116
00:06:05,190 --> 00:06:06,350
and then you can install them,

117
00:06:06,350 --> 00:06:10,510
and then you can add them into the package for the install images.

118
00:06:10,510 --> 00:06:13,590
Here we have Active Directory Prestaged Devices.

119
00:06:13,590 --> 00:06:19,740
I went ahead and ran my pre‑execution environment and added in a computer,

120
00:06:19,740 --> 00:06:24,280
and it automatically added in a computer called administrator1. And it

121
00:06:24,280 --> 00:06:27,070
did that because I was logged in as the administrator.

122
00:06:27,070 --> 00:06:30,390
If you're logged in as another user, then you'll see that name instead.

123
00:06:30,390 --> 00:06:33,880
And then my next computer I add in should be called administrator2.

124
00:06:33,880 --> 00:06:37,340
Understanding additional features and changes to the installation

125
00:06:37,340 --> 00:06:45,000
will allow you to customize how you want Windows Deployment Services to work in your environment.

