WEBVTT

00:00.850 --> 00:08.350
Now let's set to the DNS server addresses the last part of the certain fixed IP address is to set the

00:08.410 --> 00:16.930
DNS server addresses because your phone's domain controller in the New Forest should also be our DNS

00:16.930 --> 00:17.600
server.

00:17.710 --> 00:25.230
That's pretty easy to do by using their cert does DNS client server address Gaumont lot.

00:25.240 --> 00:29.130
So let's perform the next steps.

00:29.990 --> 00:34.920
We'll use Surt the DNS client server address command.

00:34.970 --> 00:43.120
Then there's interface Elyas and you have to put in your alias of your interface.

00:43.130 --> 00:53.770
In my case a just network in quotes then dasht server addresses and Putin addresses you want to use.

00:53.830 --> 01:00.610
So you could use the address of your first server which you are setting up right now.

01:02.370 --> 01:11.870
And now if you perform there get the net IP address there's interface ls and the name of your interface.

01:12.000 --> 01:18.150
You can get the same or maybe pretty much the same picture like mine.

01:18.150 --> 01:29.690
So you have all this settles down and all the network interface is set up and ready to be used for the

01:29.790 --> 01:31.810
domain controller set up.

01:31.820 --> 01:39.970
Prosser's before you actually deploy your new forest you should set the name of your domain controller

01:39.970 --> 01:41.920
to match your name and convention.

01:42.050 --> 01:49.210
Changing the name of a computer causes a reboot which is why you should delay the change until all of

01:49.720 --> 01:59.800
all the IP address certain is done to change the name of this new server to some name you prefer to

02:00.010 --> 02:02.140
use their real name computer.

02:02.140 --> 02:02.460
Come on.

02:02.470 --> 02:08.450
Let to by using the following syntax so let's dive rename this computer.

02:08.470 --> 02:10.780
There's a new name here.

02:10.780 --> 02:12.760
You have to put in your name.

02:12.760 --> 02:16.130
In my case it's Larb see one.

02:16.170 --> 02:18.010
Then there's the restart.

02:18.030 --> 02:26.080
There's fourth and Desch parse through parameter list changes the name of the server and automatically

02:26.080 --> 02:34.690
restarts it's the dash force parameter suppresses the confirmation prompt and let this pass through

02:34.690 --> 02:38.330
parameter returns the results of the command.

02:38.440 --> 02:45.210
After this or restarts you feel you you're ready to actually deploy your forest.

02:45.240 --> 02:53.780
I am now Lorcan owner already and set up already a domain controller but I'll demonstrate the process

02:53.840 --> 03:02.570
of setting up the first domain controller on some other server and you will have a possibility to follow

03:02.570 --> 03:04.340
along if you wish.