WEBVTT

00:00.800 --> 00:10.740
It it's important to say that it is impossible to turn on a remote and enable remote and you no domain

00:10.820 --> 00:20.830
environment to do this you have to Iran in an interactive power shell prompt for and command

00:27.300 --> 00:35.020
the around power shall prompt this administrator's privileges throng the full and.

00:35.460 --> 00:39.080
Been around good config.

00:44.560 --> 00:47.290
Here I have for this command already.

00:47.310 --> 00:55.770
So the service is already running but if you are running this for the first time you could get some

00:58.080 --> 00:58.500
gross

01:01.380 --> 01:02.970
to fix this error.

01:03.110 --> 01:07.800
You going to meet the following commands.

01:07.910 --> 01:16.870
I'll run the environment here to show you this commands.

01:17.080 --> 01:24.250
The first command to your real need to fix it is Cat Network Connection profile.

01:24.280 --> 01:25.420
This will get

01:28.140 --> 01:33.850
the devices you've got on your system and the names of the devices.

01:33.930 --> 01:36.040
So this type of cat

01:38.940 --> 01:52.240
mood connection profile and run and they have network connection profile for either net zero interface

01:52.370 --> 01:57.500
ls and network category is public.

01:57.710 --> 02:12.690
So you could have four and there are concerns and public firewall profile and to change to private you're

02:12.700 --> 02:20.710
going to need another command which is sout network connection profile

02:24.860 --> 02:26.390
connection profile.

02:26.390 --> 02:30.110
Then we have to stay in to freeze

02:34.220 --> 02:41.740
and in our case that is not zero.

02:41.880 --> 02:46.900
And then we have to take the perimeter network category

02:50.170 --> 02:52.280
and make it private

02:54.890 --> 03:04.640
with a perimeter parse through this perimeter will show us the results of this command.

03:06.460 --> 03:12.210
Heed to the result our interface is less than zero.

03:12.440 --> 03:16.690
It's private so we can turn on

03:20.540 --> 03:29.160
her modem without any obstacles then that the next command you're going to need is enable people or

03:29.160 --> 03:34.000
remote in the following command enables that

03:37.040 --> 03:37.760
enable

03:40.290 --> 03:58.620
is remote so it will enable remote to and to check if our computer accepts the remote and we use the

03:58.620 --> 04:01.610
command and to session

04:06.450 --> 04:12.660
iritis into the we are going to enter the session.

04:12.720 --> 04:17.260
The computer name it will be a local host

04:27.880 --> 04:36.690
as you can see we are in session on localhost and it accepts sessions.

04:36.700 --> 04:41.370
Now that six decision.

04:41.480 --> 04:52.680
Also we can meant to set computers which are trusted for these we use the command set.

04:52.700 --> 04:53.380
Item

04:56.490 --> 05:02.360
then we go in a with man w as man

05:08.220 --> 05:09.410
local who is

05:13.550 --> 05:14.410
Kali and

05:18.780 --> 05:20.060
trusted hosts

05:24.510 --> 05:29.470
and Rivervale you know all all.

05:30.070 --> 05:43.030
Of course you can state their hosts which are trusted by by type in for example computer Awang computer

05:43.090 --> 05:46.280
to etc..

05:46.540 --> 05:57.450
But in this case new real type esoterics for all hoves and this command modifies trusted host lists

05:57.530 --> 06:06.320
in the region around climbed the components and their trusted host list might not be authenticated.

06:06.400 --> 06:18.530
Here is warning Bill excepted that's it about remote him on loan domain environment.