1
00:00:01,460 --> 00:00:02,750
Hey, welcome back.

2
00:00:02,840 --> 00:00:08,080
So in this lesson, we are going to learn about a few more networking commands.

3
00:00:08,090 --> 00:00:09,440
So let's quickly begin.

4
00:00:09,830 --> 00:00:16,250
So the first command that we are going to see is the query or control, the network driver and hardware

5
00:00:16,250 --> 00:00:17,210
settings command.

6
00:00:17,210 --> 00:00:23,930
So for that, you can simply type each tool and the interface you want to look upon.

7
00:00:23,930 --> 00:00:26,540
So you can see the details over here.

8
00:00:26,540 --> 00:00:34,100
So now this is going to show you the network driver and the hardware settings of the adapter that you

9
00:00:34,100 --> 00:00:37,010
are looking for, as you can see over here.

10
00:00:37,010 --> 00:00:39,920
So these are the settings for EDGE Zero.

11
00:00:40,610 --> 00:00:41,330
All right.

12
00:00:41,480 --> 00:00:49,910
Let's move ahead now in case you want to see if any of the host is up or no or simply you want to send

13
00:00:49,910 --> 00:00:54,590
ICMP equal request to the host to check if it is alive.

14
00:00:54,590 --> 00:00:59,690
You can use the command, which is ping so you can simply ping to someone.

15
00:00:59,690 --> 00:01:01,790
So let's ping to the same device.

16
00:01:01,790 --> 00:01:11,960
And the IP address of this device is one 92.1 60 8.0. 100 and let's hit enter and you can see the successful

17
00:01:11,960 --> 00:01:13,850
ping has been started.

18
00:01:13,850 --> 00:01:22,040
And also we are able to see this output which says 64 bytes from this IP address, which is the this

19
00:01:22,040 --> 00:01:25,400
own machine is replying perfect.

20
00:01:25,400 --> 00:01:32,060
So one thing you should always remember is the network or system admins widely use this command which

21
00:01:32,060 --> 00:01:39,980
is ping to identify different devices which is connected into their LAN network to identify if the host

22
00:01:39,980 --> 00:01:43,040
is up or down, if it is alive or no.

23
00:01:43,040 --> 00:01:48,500
So this can be handy in case you also want to know the different devices that are being connected into

24
00:01:48,500 --> 00:01:52,070
your network to check if they are alive or no.

25
00:01:52,740 --> 00:01:58,170
So I hope you guys understood how you can use Ping into your day to day life as it is going to save

26
00:01:58,170 --> 00:01:59,320
a lot of your time.

27
00:01:59,340 --> 00:02:05,310
To identify the devices that are being connected into your network and to check if they are alive or

28
00:02:05,310 --> 00:02:05,670
no.

29
00:02:05,700 --> 00:02:06,360
Thank you.
