1
00:00:00,300 --> 00:00:01,560
Hello, my name is Stephen.

2
00:00:01,560 --> 00:00:08,820
And in this lecture let's delve into the concept of relative addressing a technique that leverages the

3
00:00:08,820 --> 00:00:13,080
current location in relation to the RIP register.

4
00:00:13,080 --> 00:00:21,210
So this approach is valuable as it enables us to avoid relying on hardcoded addresses within our assembly

5
00:00:21,210 --> 00:00:21,540
code.

6
00:00:21,540 --> 00:00:24,330
So the process is remarkably straightforward.

7
00:00:24,330 --> 00:00:30,930
So we can achieve this by employing the Lia, which is load effective address instruction with the format

8
00:00:30,930 --> 00:00:32,460
like the.

9
00:00:33,920 --> 00:00:34,550
Leah.

10
00:00:34,790 --> 00:00:36,060
Destination.

11
00:00:36,070 --> 00:00:37,290
Destination.

12
00:00:37,940 --> 00:00:43,460
And after that, we will also give the rel rel source.

13
00:00:43,460 --> 00:00:43,940
Right.

14
00:00:43,940 --> 00:00:44,600
Source.

15
00:00:44,600 --> 00:00:54,440
So with this here, the Rel instruction in this computes the address of the source relative to the IP

16
00:00:54,440 --> 00:00:55,250
register.

17
00:00:55,640 --> 00:01:00,950
So to implement this we must define our variables before the code itself.

18
00:01:00,950 --> 00:01:08,390
So this definition should precede the current location of the IP register and otherwise, if it's situated

19
00:01:08,420 --> 00:01:15,560
too far away, the variable's value will be truncated and the remainder of register will be filled with

20
00:01:15,560 --> 00:01:16,160
zeros.

21
00:01:16,160 --> 00:01:22,670
So now let's take the next step and enhance our shell code using the relative address technique to precisely

22
00:01:22,670 --> 00:01:24,920
locate the Hello World String.

23
00:01:24,920 --> 00:01:28,670
So we will declare the entry point of the program as start.

24
00:01:28,670 --> 00:01:30,890
So global.

25
00:01:31,880 --> 00:01:32,390
Sorry.

26
00:01:32,390 --> 00:01:34,970
Here global start here.

27
00:01:34,970 --> 00:01:41,870
We will create a text section containing the actual program code section text.

28
00:01:43,120 --> 00:01:43,990
Text here.

29
00:01:43,990 --> 00:01:46,990
So we will first start here.

30
00:01:47,260 --> 00:01:52,090
So we will start the program executing from this label.

31
00:01:53,180 --> 00:01:55,410
So GMP cut.

32
00:01:55,970 --> 00:02:02,330
Here we are jumping to the code label, which we will define now.

33
00:02:02,570 --> 00:02:10,940
And also in this section we will need to define the Hello world to declare a null terminated string.

34
00:02:11,830 --> 00:02:12,850
Uh, now.

35
00:02:16,230 --> 00:02:17,070
Here.

36
00:02:19,120 --> 00:02:20,770
It will also create a Hello world.

37
00:02:23,850 --> 00:02:25,080
Hello, world.

38
00:02:26,310 --> 00:02:27,240
String.

39
00:02:27,240 --> 00:02:28,490
And what will it?

40
00:02:28,500 --> 00:02:29,550
Containers.

41
00:02:29,760 --> 00:02:30,720
Hello, world.

42
00:02:31,350 --> 00:02:36,300
Now we will also declare it with this null termination here.

43
00:02:36,420 --> 00:02:41,820
0XA And after that we will create our code label.

44
00:02:41,970 --> 00:02:44,490
This is the main code section for our program.

45
00:02:44,490 --> 00:02:47,370
Code here and here.

46
00:02:47,370 --> 00:02:50,250
We will not create this with our tab here.

47
00:02:50,250 --> 00:02:55,560
So because this is the label, the labels writes this way in assembly.

48
00:02:55,560 --> 00:03:01,290
So now we will create our instructions to prepare Siskel to print the string.

49
00:03:01,290 --> 00:03:14,010
So mov al uh, here mov al one which is the with this here we are telling the assembly to load the Siskel

50
00:03:14,010 --> 00:03:14,730
number for.

51
00:03:14,730 --> 00:03:15,150
Right.

52
00:03:15,150 --> 00:03:19,320
Which is Siskel number one into the al register.

53
00:03:19,350 --> 00:03:26,130
Now we will clear the register with x or so our x or die.

54
00:03:27,660 --> 00:03:29,430
Here are the I.

55
00:03:30,540 --> 00:03:37,590
Now we are clearing the register, which is a file descriptor zero for the standard output.

56
00:03:37,590 --> 00:03:49,500
And we will add the we will set the RTI to one, we will set the RTI to one and we will load the address

57
00:03:49,500 --> 00:03:53,160
of Hello World into RC, which is the pointer to the string.

58
00:03:53,160 --> 00:04:01,740
So Leah, as I said, we will use this Leah here, RC the RL and Hello World.

59
00:04:04,820 --> 00:04:05,270
With this.

60
00:04:05,270 --> 00:04:08,620
Here we are loading the address of Hello World into RSA.

61
00:04:08,660 --> 00:04:14,690
As I said, and we will use XOR here again, which is for clearing the RDX register.

62
00:04:14,780 --> 00:04:20,810
RDX, RDX here, RDX.

63
00:04:20,810 --> 00:04:27,920
And after that we will set the RDX to 12 because this is the length of the string.

64
00:04:27,950 --> 00:04:30,020
Hello world and.

65
00:04:31,650 --> 00:04:35,820
Are the X here and 12.

66
00:04:38,720 --> 00:04:44,360
Also after Hello World, we also have this new line which and also the null terminated string here.

67
00:04:44,360 --> 00:04:46,580
So that's why it is 12.

68
00:04:48,070 --> 00:04:54,760
If the count is one, two, three, four, five, six, seven, eight, nine, ten, 11.

69
00:04:54,760 --> 00:04:56,470
And we also have the 12 here.

70
00:04:56,800 --> 00:05:02,890
And after that we will perform the syscall to print the string syscall.

71
00:05:05,110 --> 00:05:08,410
And here after that, we will need.

72
00:05:09,790 --> 00:05:15,530
To, uh, to prepare the fiscal to exit our program.

73
00:05:15,550 --> 00:05:24,310
And in order to do that, we will use clear the racks, register with X or racks here racks.

74
00:05:25,330 --> 00:05:31,690
And we are we are going to add the racks 60.

75
00:05:31,690 --> 00:05:34,810
We are setting the racks to 60, which is this.

76
00:05:34,810 --> 00:05:44,920
This is the fiscal number for exit and we will use the X or racks or no racks, the die or die.

77
00:05:46,480 --> 00:05:52,690
Uh, with clearing the register, which is this is the exit status zero.

78
00:05:52,690 --> 00:05:57,340
And after that we will perform the syscall to exit the program.

79
00:05:57,580 --> 00:05:58,660
Syscall here.

80
00:05:58,660 --> 00:05:59,350
That's it.

81
00:05:59,530 --> 00:06:09,190
Now, our Start label is declared as the program's entry point execution begins at this label here.

82
00:06:09,190 --> 00:06:11,770
And we also have the GMP code.

83
00:06:12,250 --> 00:06:18,280
This instruction jumps to the code label and effectively skipping the Hello World label for now.

84
00:06:18,490 --> 00:06:23,770
And the Hello World label is a null terminated string containing the Hello world followed by a new line

85
00:06:23,770 --> 00:06:30,190
character 0XA and the code label marks the main part of the program where the actual code execution

86
00:06:30,190 --> 00:06:33,550
takes place and the first block of our instruction.

87
00:06:34,270 --> 00:06:36,850
Prepares a syscall to print the string.

88
00:06:36,880 --> 00:06:38,300
MOV al one.

89
00:06:38,320 --> 00:06:44,980
Sets the value of al register to one which corresponds to the syscall number for the write system.

90
00:06:44,980 --> 00:06:51,790
Call and SDA are the I sometimes recall this as RDA or RDA.

91
00:06:51,790 --> 00:07:00,970
So RDA RDA here clears the RDA register which will be used to specify the file descriptor and this is

92
00:07:00,970 --> 00:07:11,590
the zero for standard output and RDA add RDA one sets the RDA to one indicating standard output and

93
00:07:11,590 --> 00:07:15,400
as I said, explained this in this lecture.

94
00:07:15,490 --> 00:07:25,030
You learned that in this lecture the l e a so l e rsi rel Hello World loads the address of Hello World

95
00:07:25,030 --> 00:07:28,210
string into the RSI register and.

96
00:07:29,080 --> 00:07:31,850
And we also have the RDX, RDX.

97
00:07:31,870 --> 00:07:37,900
This clears the RDX register, which will be used to specify the length of the string to be printed.

98
00:07:37,900 --> 00:07:48,520
And also we have the RDX and RDX 12, which as I explained, which is the length of the string.

99
00:07:48,550 --> 00:07:49,500
Hello world.

100
00:07:49,520 --> 00:07:51,160
New new line character.

101
00:07:51,160 --> 00:07:57,010
And we also have the syscall executes the write syscall printing the string to the console.

102
00:07:57,010 --> 00:08:01,960
And the second block of our instruction prepares a syscall to exit the program.

103
00:08:01,960 --> 00:08:07,030
So x or x rax clears the rax register which will hold the syscall number.

104
00:08:07,030 --> 00:08:16,450
And this is for the 60 to exit and add rax 60 sets the rax to 60, indicating the syscall number for

105
00:08:16,450 --> 00:08:25,930
exit and X or clears the RDA register which will be used to specify the exit status in this case.

106
00:08:25,930 --> 00:08:32,510
And after that, as always, syscall executes the exit syscall terminating the program.

107
00:08:34,290 --> 00:08:40,050
Now let's actually compile and assemble our this assembly language code.

108
00:08:40,080 --> 00:08:46,440
Now and after that, you will see what's what we changed here with our programs.

109
00:08:46,440 --> 00:08:50,700
Logic so Nasm f elf 64.

110
00:08:50,730 --> 00:09:00,150
Hello dot hsm dot HSM here and hello world dot all here.

111
00:09:00,150 --> 00:09:02,550
And as you can see we got some warnings but don't worry about that.

112
00:09:02,580 --> 00:09:05,190
We have our code working.

113
00:09:05,880 --> 00:09:06,750
Okay here.

114
00:09:06,750 --> 00:09:09,810
So hello world dot.

115
00:09:09,810 --> 00:09:12,180
All here and all.

116
00:09:12,180 --> 00:09:13,080
Hello world.

117
00:09:14,530 --> 00:09:15,130
Hello.

118
00:09:16,040 --> 00:09:16,460
Yeah.

119
00:09:16,490 --> 00:09:16,820
Well.

120
00:09:17,510 --> 00:09:21,630
And now we will use the as you can see, we have the Hello world here again.

121
00:09:21,660 --> 00:09:24,680
La la la la la.

122
00:09:25,280 --> 00:09:26,210
Just created.

123
00:09:26,210 --> 00:09:27,710
Now here.

124
00:09:28,670 --> 00:09:34,520
Now what we're going to do is we will use the Objdump again and you will see the interesting things

125
00:09:34,520 --> 00:09:34,940
here.

126
00:09:34,940 --> 00:09:39,260
So M Intel, Hello world here.

127
00:09:39,350 --> 00:09:41,600
And that's it.

128
00:09:41,630 --> 00:09:45,280
We have no bad characters at all.

129
00:09:45,320 --> 00:09:50,780
So now let's try it as a shell code and let's see what will change here.

130
00:09:50,810 --> 00:09:55,940
Objdump Oh, actually we can also let's actually write it from zero here.

131
00:09:55,940 --> 00:09:57,680
We know how to do that, right?

132
00:09:57,680 --> 00:10:04,550
So objdump m Intel the hello world here grep.

133
00:10:05,710 --> 00:10:06,520
Hello, world.

134
00:10:06,620 --> 00:10:07,180
Grab.

135
00:10:11,500 --> 00:10:12,120
Crap.

136
00:10:12,130 --> 00:10:13,750
Zero nine.

137
00:10:14,110 --> 00:10:15,730
A f.

138
00:10:17,790 --> 00:10:18,570
Here.

139
00:10:20,650 --> 00:10:26,230
And grab the file.

140
00:10:27,800 --> 00:10:29,210
And cut.

141
00:10:30,810 --> 00:10:32,580
F to d.

142
00:10:32,970 --> 00:10:39,810
Here you will use this code every time you you create a new shell code here.

143
00:10:39,810 --> 00:10:44,860
So save this command somewhere so you don't have to write it all again.

144
00:10:44,880 --> 00:10:46,920
It's not a short command.

145
00:10:46,950 --> 00:10:47,550
Right?

146
00:10:47,550 --> 00:10:48,810
So cut.

147
00:10:49,260 --> 00:10:50,160
And after that?

148
00:10:50,160 --> 00:10:50,640
Yeah.

149
00:10:50,850 --> 00:11:00,210
After cutting the F to D, we need to cut the FF177 here.

150
00:11:00,450 --> 00:11:01,200
Seven.

151
00:11:01,680 --> 00:11:04,590
And after that the here.

152
00:11:07,080 --> 00:11:07,920
He r.

153
00:11:08,220 --> 00:11:08,970
S.

154
00:11:11,140 --> 00:11:11,860
TR.

155
00:11:17,440 --> 00:11:19,570
Tears here and.

156
00:11:21,710 --> 00:11:22,820
They are.

157
00:11:24,010 --> 00:11:24,970
No.

158
00:11:25,330 --> 00:11:26,980
Yeah, they are.

159
00:11:30,660 --> 00:11:33,000
He and.

160
00:11:34,860 --> 00:11:35,610
Here.

161
00:11:36,270 --> 00:11:37,170
Set.

162
00:11:40,180 --> 00:11:42,430
S no backslash here.

163
00:11:43,000 --> 00:11:45,190
And dollar sign.

164
00:11:45,860 --> 00:11:46,760
Where is my dollar?

165
00:11:46,860 --> 00:11:47,210
Yeah.

166
00:11:47,240 --> 00:11:48,560
Dollar sign.

167
00:11:49,250 --> 00:11:50,360
Double slash.

168
00:11:50,360 --> 00:11:51,290
Like this.

169
00:11:52,250 --> 00:11:52,580
G.

170
00:11:53,540 --> 00:11:56,030
And after that we will use the set.

171
00:11:56,240 --> 00:11:57,530
S here.

172
00:11:58,370 --> 00:12:01,910
The slash slash here.

173
00:12:02,210 --> 00:12:03,080
This.

174
00:12:04,420 --> 00:12:05,890
X this year.

175
00:12:06,040 --> 00:12:14,920
And after that we will write G here and we will paste the here.

176
00:12:16,290 --> 00:12:16,800
As.

177
00:12:18,280 --> 00:12:18,490
Hmm.

178
00:12:19,690 --> 00:12:23,920
I think we didn't close some of the schools we opened here.

179
00:12:26,130 --> 00:12:28,410
So let's analyze it.

180
00:12:31,530 --> 00:12:32,160
Yeah.

181
00:12:32,490 --> 00:12:36,180
The problem is, I believe it's here.

182
00:12:36,930 --> 00:12:39,720
We need to add another code here, and that's it.

183
00:12:40,440 --> 00:12:44,130
And as you can see, here, we have.

184
00:12:44,900 --> 00:12:45,740
This.

185
00:12:47,390 --> 00:12:48,080
Here.

186
00:12:48,080 --> 00:12:51,770
So it starts with A, B or C.

187
00:12:54,010 --> 00:12:56,230
It also have a 35.

188
00:13:05,210 --> 00:13:05,840
Yeah.

189
00:13:06,200 --> 00:13:08,180
And this is our shell code.

190
00:13:08,180 --> 00:13:13,550
And as you can see here, we do not have any bad characters at all here.

191
00:13:13,550 --> 00:13:17,240
So the bad characters, you learn that bad characters in previous lectures.

192
00:13:17,240 --> 00:13:23,600
So 000A, f, F0D and we do not have those, luckily.

193
00:13:23,600 --> 00:13:27,860
So because we wrote our program exceptionally good.

194
00:13:27,860 --> 00:13:36,800
So what are we going to do here is we will code that to our C plus plus program, not C plus plus the

195
00:13:36,800 --> 00:13:37,970
C program here.

196
00:13:39,490 --> 00:13:40,540
You might get.

197
00:13:40,570 --> 00:13:41,060
Oops.

198
00:13:41,080 --> 00:13:41,800
No.

199
00:13:42,160 --> 00:13:42,790
Yeah.

200
00:13:43,180 --> 00:13:45,950
And as you can see, we have some warning here.

201
00:13:45,970 --> 00:13:47,740
This is an escaped backslash.

202
00:13:47,740 --> 00:13:51,310
At the end of the string is not portable.

203
00:13:52,220 --> 00:13:52,730
I believe.

204
00:13:52,730 --> 00:13:54,260
Let's actually check this again.

205
00:13:54,440 --> 00:13:57,350
Why this tells us here.

206
00:13:58,190 --> 00:13:59,810
Teachers.

207
00:14:02,620 --> 00:14:04,590
So tr.

208
00:14:04,780 --> 00:14:06,720
S s.

209
00:14:08,900 --> 00:14:09,680
And.

210
00:14:11,650 --> 00:14:12,520
Airlines.

211
00:14:13,870 --> 00:14:15,340
Space characters.

212
00:14:15,440 --> 00:14:16,300
TR.

213
00:14:18,410 --> 00:14:20,510
Oh, yeah, we have this error here.

214
00:14:20,510 --> 00:14:21,170
That's it.

215
00:14:21,170 --> 00:14:24,680
And as you can see here, we don't have that warning anymore.

216
00:14:24,680 --> 00:14:29,720
But actually we didn't change this anything at all in our shell code.

217
00:14:29,720 --> 00:14:34,060
But it's okay to write the nice code without warnings here, right?

218
00:14:34,070 --> 00:14:35,390
So that's it.

219
00:14:36,170 --> 00:14:41,520
We got we got the same results still here, but I don't want to use.

220
00:14:41,750 --> 00:14:46,490
So this warning here and yeah, we had some type of error here.

221
00:14:46,490 --> 00:14:51,200
So now let's actually copy this into our C code here.

222
00:14:53,360 --> 00:14:54,140
Now.

223
00:14:57,210 --> 00:14:58,230
In order to do that.

224
00:14:58,230 --> 00:15:02,460
And as you can see here in previous code here, we have lots of bad characters.

225
00:15:02,460 --> 00:15:05,910
So now we will copy this here and that's it.

226
00:15:07,590 --> 00:15:08,040
Here.

227
00:15:09,260 --> 00:15:11,630
So now let's go to here.

228
00:15:13,550 --> 00:15:17,210
It's actually use this terminal in our Visual Studio.

229
00:15:17,510 --> 00:15:18,200
Clear.

230
00:15:18,860 --> 00:15:21,230
So we don't have to switch that over time.

231
00:15:22,920 --> 00:15:26,070
Or let's actually use stick to the traditions here.

232
00:15:26,070 --> 00:15:36,360
So now what we're going to do is we will run compile this here with F No, no FPI, F, no stack.

233
00:15:37,450 --> 00:15:38,570
Protector.

234
00:15:38,590 --> 00:15:40,000
Protector.

235
00:15:40,030 --> 00:15:41,800
The exact stack.

236
00:15:41,830 --> 00:15:42,760
And.

237
00:15:43,990 --> 00:15:44,870
Hello, world.

238
00:15:44,930 --> 00:15:45,760
That's.

239
00:15:47,660 --> 00:15:48,430
Hey, where.

240
00:15:48,440 --> 00:15:50,350
Where is our mate?

241
00:15:50,420 --> 00:15:51,200
No, it's.

242
00:15:51,200 --> 00:15:52,370
It's main.cpp.

243
00:15:53,750 --> 00:15:54,290
Mean.

244
00:15:55,930 --> 00:15:56,650
Not CP.

245
00:15:56,740 --> 00:16:03,010
Actually, it's as you can see, we have our file name is Main CP, but it doesn't matter for the GCC

246
00:16:03,010 --> 00:16:05,710
here if your file name is here.

247
00:16:05,710 --> 00:16:12,160
So let's actually change this name to main dot CP, But actually let's change this from the Visual Studio

248
00:16:12,160 --> 00:16:13,390
code here because.

249
00:16:15,900 --> 00:16:17,190
Oh, turns out we.

250
00:16:20,230 --> 00:16:21,370
Can change it here.

251
00:16:21,370 --> 00:16:21,820
Yeah.

252
00:16:22,240 --> 00:16:23,080
rMe.

253
00:16:23,530 --> 00:16:24,520
Main.cpp.

254
00:16:24,550 --> 00:16:26,080
Main.cpp here.

255
00:16:26,080 --> 00:16:27,040
Main.c.

256
00:16:29,160 --> 00:16:29,580
No.

257
00:16:30,650 --> 00:16:34,600
And we main dot cpp Main.c and sunos.

258
00:16:34,940 --> 00:16:36,850
Why don't we have the.

259
00:16:36,860 --> 00:16:40,100
No, we don't have this main.cpp here.

260
00:16:40,130 --> 00:16:41,450
Why is that?

261
00:16:50,610 --> 00:16:52,500
It should be somewhere sheltered.

262
00:16:52,530 --> 00:16:54,930
Maybe we deleted that accidentally.

263
00:16:55,020 --> 00:16:55,950
That's actually.

264
00:16:57,180 --> 00:16:58,170
Create a new.

265
00:17:02,720 --> 00:17:04,640
Main dot C here.

266
00:17:05,060 --> 00:17:06,560
And copy this here.

267
00:17:06,680 --> 00:17:08,030
And the same code.

268
00:17:08,120 --> 00:17:11,960
And as you can see, we will not change anything in our code.

269
00:17:12,050 --> 00:17:18,440
And now can we actually increase the size of this and the terminal size?

270
00:17:18,470 --> 00:17:18,980
No.

271
00:17:19,830 --> 00:17:21,900
I believe we can from the settings.

272
00:17:21,900 --> 00:17:26,940
But now instead of increasing it, let's actually use this terminal here.

273
00:17:26,940 --> 00:17:28,380
Stick to the traditions.

274
00:17:28,380 --> 00:17:34,650
And we have we should have the Hello world, the main dot see here.

275
00:17:35,490 --> 00:17:36,060
Right.

276
00:17:38,970 --> 00:17:42,510
Yeah, I think we move this somewhere or do it.

277
00:17:42,840 --> 00:17:44,760
So now what we're going to do is.

278
00:17:46,510 --> 00:17:47,410
Now we will.

279
00:17:47,420 --> 00:17:48,040
Geek.

280
00:17:50,060 --> 00:17:51,550
F no stack.

281
00:17:52,570 --> 00:18:04,420
Protector the exec stack here and main dot C here main dot c Yeah we have exec start ignored here.

282
00:18:04,660 --> 00:18:17,020
We know that we did that on purpose and now the final thing here and now we have the shell code length.

283
00:18:17,170 --> 00:18:22,630
We have the segmentation fault at the shell code 51 here.

284
00:18:22,630 --> 00:18:25,090
Let's actually see what happened here.

285
00:18:31,750 --> 00:18:34,150
We probably have that bad characters again.

286
00:18:35,260 --> 00:18:36,070
So.

287
00:18:37,100 --> 00:18:37,260
One.

288
00:18:37,400 --> 00:18:38,600
One, two, three.

289
00:18:48,080 --> 00:18:49,640
Why we have that.

290
00:18:54,190 --> 00:18:56,500
Let's actually find another place.

291
00:18:56,500 --> 00:19:01,600
Search for slash back slash and replace to new line.

292
00:19:03,280 --> 00:19:04,060
No.

293
00:19:08,630 --> 00:19:09,890
Regular expression.

294
00:19:26,490 --> 00:19:30,120
Find and place New line.

295
00:19:31,700 --> 00:19:32,950
And don't we have Internet?

296
00:19:33,340 --> 00:19:35,850
Yeah, sure, we can do that.

297
00:19:35,980 --> 00:19:38,080
I think from the regular expressions here.

298
00:19:40,590 --> 00:19:44,370
And I think I did that correct in previous example here.

299
00:19:44,370 --> 00:19:46,110
So we will search for the.

300
00:19:47,740 --> 00:19:51,400
Slashes not for apparent and regular expression.

301
00:19:51,580 --> 00:19:53,230
And here.

302
00:19:54,520 --> 00:19:57,850
We will change to New line.

303
00:20:00,570 --> 00:20:05,070
Or we can also enable the regular expression, change the access to new line.

304
00:20:05,070 --> 00:20:06,120
And that's it.

305
00:20:07,760 --> 00:20:08,570
And.

306
00:20:09,390 --> 00:20:15,710
As you can see here, we have the bad character in here.

307
00:20:15,720 --> 00:20:20,580
This is f f, which is mentioned as bad character.
