1
00:00:00,750 --> 00:00:07,560
In the previous two videos, we saw how we can discover Life Post in a target network by using a map

2
00:00:07,570 --> 00:00:13,770
and it's been three now we will see how we can discover life boards by using the same.

3
00:00:14,020 --> 00:00:16,650
OK, so let's start with and map first.

4
00:00:17,700 --> 00:00:26,400
So let's clear the screen and now let's state and map and your target IP that is to dot seven.

5
00:00:27,690 --> 00:00:32,550
And remember, 237 seven is the IP address of my window ten virtual machine.

6
00:00:33,540 --> 00:00:38,010
So now a map has started and it's scanning for lifeboats.

7
00:00:39,840 --> 00:00:43,440
See boards are basically the entry and exit points.

8
00:00:44,100 --> 00:00:52,410
OK, see here is the output support number 135 is open and the service name is Ms.

9
00:00:52,410 --> 00:00:54,200
IACP IVC.

10
00:00:54,360 --> 00:00:56,720
OK, the next is next bios.

11
00:00:56,730 --> 00:01:04,820
Okay, see one card in name and the Mac address of Windows then virtual machine.

12
00:01:04,830 --> 00:01:06,950
Is this right.

13
00:01:07,710 --> 00:01:13,840
So it says that total time taken is this and only three boards are open.

14
00:01:15,490 --> 00:01:23,750
OK, and it also says that it is scanned 1000 ports on which nine nine seven are closed ports.

15
00:01:25,520 --> 00:01:29,650
OK, we can also increase or decrease the number of scanned ports.

16
00:01:29,950 --> 00:01:38,490
Right now you have saw that how we can use and maybe discover life host and life board.

17
00:01:38,880 --> 00:01:44,670
Now, in the next video, we will see how we can use Eppink three to discover lifeboats.