1
00:00:00,360 --> 00:00:02,860
Welcome back now we're going to wrap up the remaining tasks.

2
00:00:02,880 --> 00:00:07,800
Let's read a unit test for this piece of behavior for a loan accounts, every withdrawal is charged,

3
00:00:07,800 --> 00:00:10,050
a fixed interest rate of two percent.

4
00:00:10,560 --> 00:00:14,500
So right here we'll create a unit test called withdrawal interest.

5
00:00:14,520 --> 00:00:16,230
I'll give you some time to write that out.

6
00:00:22,620 --> 00:00:27,840
OK, and now from the loan accounts, from the account and index two, we're going to withdraw.

7
00:00:29,110 --> 00:00:37,810
Twenty four, $434 point thirty one cents and the alone account is already twenty five hundred dollars

8
00:00:37,810 --> 00:00:39,730
in debt, so we can assert.

9
00:00:43,160 --> 00:00:44,280
A third equals.

10
00:00:46,020 --> 00:00:52,560
That after this withdrawal, the debt becomes five thousand twenty dollars point thirty one cents after

11
00:00:52,560 --> 00:00:57,690
we get the account's current balance counts at indexed to get balance.

12
00:00:59,150 --> 00:00:59,540
OK.

13
00:00:59,610 --> 00:01:00,380
Run the test.

14
00:01:02,930 --> 00:01:05,990
And it fails, but now we can write code to make it pass.

15
00:01:06,950 --> 00:01:09,490
So here I'm going to return true by default.

16
00:01:11,540 --> 00:01:17,810
We're going to update the balance super balance by getting the current balance super delegate balance,

17
00:01:18,440 --> 00:01:20,930
which for a loan account represents debt.

18
00:01:21,230 --> 00:01:27,410
So whatever the user withdraws will increase the debt and the debt equals whatever the amount is that

19
00:01:27,410 --> 00:01:28,130
they would draw.

20
00:01:30,310 --> 00:01:33,130
Plus, the interest, which is going to be that same amount.

21
00:01:34,500 --> 00:01:36,450
Times zero point zero two.

22
00:01:41,380 --> 00:01:46,840
And as always, don't forget to round to two decimal places, so here we're going to say super round

23
00:01:47,440 --> 00:01:49,120
and round our results.

24
00:01:52,600 --> 00:01:58,100
Now, do you see anything slightly wrong with this interest rate is an important value?

25
00:01:58,120 --> 00:01:59,770
So we're going to make this a constant.

26
00:02:01,030 --> 00:02:03,580
We're going to say private static.

27
00:02:04,480 --> 00:02:09,550
Vinyl double interest rate is equal to zero point zero two.

28
00:02:10,889 --> 00:02:12,570
And we're going to use the constant instead.

29
00:02:23,090 --> 00:02:24,620
If I rerun my unit test.

30
00:02:29,940 --> 00:02:34,370
Everything works now, our account is five thousand twenty dollars in debt.

31
00:02:35,690 --> 00:02:36,760
OK, we're almost done.

32
00:02:36,860 --> 00:02:39,080
We're in a writing test for this piece of behavior.

33
00:02:39,200 --> 00:02:42,560
So for a loan accounts, there's a withdrawal limit of $10000.

34
00:02:42,980 --> 00:02:46,070
So here we'll say well will create a unit test.

35
00:02:47,840 --> 00:02:52,100
And toll caps, I'm going to write the unit test would draw a limit.

36
00:02:55,880 --> 00:03:02,120
And from the savings account, which is that indexed to accounts at indexed two, I'm going to withdraw

37
00:03:02,570 --> 00:03:03,650
7000.

38
00:03:04,610 --> 00:03:08,570
$463 point 69 cents.

39
00:03:11,930 --> 00:03:16,040
But looking back, the loan account is already $2500 in debt.

40
00:03:20,070 --> 00:03:25,770
And the account isn't allowed to exceed $10000 in debt, so here I'm going to assert that nothing changes

41
00:03:26,280 --> 00:03:27,240
assert equals.

42
00:03:28,980 --> 00:03:34,800
The balance remains the same at twenty five hundred thirty seven point thirty one cents after we get

43
00:03:34,800 --> 00:03:36,030
that account balance.

44
00:03:37,090 --> 00:03:39,130
Counts to get balance.

45
00:03:41,050 --> 00:03:41,560
OK.

46
00:03:42,010 --> 00:03:43,000
Run the tests.

47
00:03:45,650 --> 00:03:48,120
And it fails, it does make the withdrawal.

48
00:03:48,210 --> 00:03:48,980
That's not good.

49
00:03:49,490 --> 00:03:50,510
So back here.

50
00:03:52,770 --> 00:03:55,710
We'll see if the balance, if the current dipped.

51
00:04:02,070 --> 00:04:03,180
Plus the amount.

52
00:04:04,540 --> 00:04:08,140
If it's bigger than the maximum depth, if it's bigger than 10000.

53
00:04:10,160 --> 00:04:14,870
If it's bigger than the maximum amount of debt a loan account is allowed to have, then we're going

54
00:04:14,870 --> 00:04:15,920
to return false.

55
00:04:17,130 --> 00:04:18,000
Nothing will happen.

56
00:04:18,959 --> 00:04:24,870
And instead of putting the rally 10000 directly here, I'm going to create another static constant private

57
00:04:24,870 --> 00:04:33,750
static final double max debt and set that equal to 10000 and use the constant instead.

58
00:04:38,500 --> 00:04:38,760
OK.

59
00:04:38,800 --> 00:04:41,950
This does remind me of something and checking together.

60
00:04:43,300 --> 00:04:45,850
We don't need to return true twice here.

61
00:04:46,450 --> 00:04:48,070
We can just return true at the end.

62
00:04:50,740 --> 00:04:53,920
Because if this executes, it's going to break the entire function.

63
00:04:53,950 --> 00:04:56,710
And if one of these executed, then it'll return true.

64
00:04:56,800 --> 00:05:01,620
So anyways, not a very big deal, but back here looks good.

65
00:05:01,630 --> 00:05:03,190
I think we can just run our test.

66
00:05:06,510 --> 00:05:07,320
And beautiful.

67
00:05:09,450 --> 00:05:14,310
OK, back in requirements text, it seems that we're done writing the logic for withdrawal.

68
00:05:14,490 --> 00:05:17,100
Now we're going to test the behavior for deposits.

69
00:05:17,700 --> 00:05:22,680
Now the logic for checking and savings deposits should be identical because you're just adding money

70
00:05:22,680 --> 00:05:23,400
to an account.

71
00:05:23,760 --> 00:05:28,230
So I'm going to create a unit test named deposit test.

72
00:05:29,020 --> 00:05:30,280
Public void.

73
00:05:33,210 --> 00:05:33,900
Deposit.

74
00:05:35,390 --> 00:05:41,570
And I'll deposit $5000 into the checking account, don't deposit 5000.

75
00:05:45,850 --> 00:05:47,110
And then I'm going to assert.

76
00:05:48,300 --> 00:05:53,670
But the resulting balance is six thousand five hundred and twenty four point five one.

77
00:05:54,120 --> 00:05:56,190
After we get the updated balance.

78
00:05:59,310 --> 00:06:02,100
OK, now we can write code to make it pass.

79
00:06:03,030 --> 00:06:04,170
So we'll go to checking.

80
00:06:07,550 --> 00:06:14,540
He will say super dad set balance will update the balance to be the current balance, super balance,

81
00:06:14,540 --> 00:06:21,170
plus the amount being deposited, and just don't forget to use Super Dot Round so we can ensure that

82
00:06:21,170 --> 00:06:23,420
we have two decimal places for money.

83
00:06:24,640 --> 00:06:25,240
OK.

84
00:06:25,660 --> 00:06:28,450
And we should be able to run the test now.

85
00:06:31,970 --> 00:06:38,720
And perfect now the deposit method for a savings should be identical to checking so we can just go ahead

86
00:06:38,720 --> 00:06:41,410
in savings and replicate the same logic.

87
00:06:41,450 --> 00:06:50,690
We'll go here, we'll say super set balance, super dot around, super dark get balance plus amount.

88
00:06:54,830 --> 00:06:57,710
All right, now, we got a ready unit test for loan deposits.

89
00:06:57,740 --> 00:07:03,200
The difference is when you deposit money into a loan account, your loan balance is decreasing.

90
00:07:03,620 --> 00:07:06,980
Think of it like paying your credit card in any case.

91
00:07:07,370 --> 00:07:09,980
We'll go back here and I'll create a unit tests.

92
00:07:12,740 --> 00:07:15,590
Public void named loan deposit.

93
00:07:18,220 --> 00:07:21,850
Inside, I'm going to make a $1000 deposit to the loan accounts.

94
00:07:23,250 --> 00:07:25,500
Accounts and index to.

95
00:07:26,610 --> 00:07:29,520
That deposit $1000.

96
00:07:32,230 --> 00:07:38,420
And after we're going to assert the resulting loan balance as third equals is one thousand five hundred

97
00:07:38,420 --> 00:07:39,880
and thirty seven point three one.

98
00:07:40,900 --> 00:07:46,000
After we get the updated loan account balance accounts at indexed to.

99
00:07:47,130 --> 00:07:48,690
Does it get balance?

100
00:07:54,610 --> 00:07:55,840
OK, the test should fail.

101
00:07:58,560 --> 00:07:59,040
Nice.

102
00:07:59,070 --> 00:08:00,900
Now we get to write code to make it pass.

103
00:08:01,320 --> 00:08:02,520
So right here.

104
00:08:03,950 --> 00:08:07,040
We'll just say super dad set balance.

105
00:08:10,980 --> 00:08:16,500
Well, around whatever calculation we do to two decimal places will get the current balance, super

106
00:08:16,950 --> 00:08:22,830
balance and subtract the amount that's being deposited, thus reducing the person's loan.

107
00:08:23,760 --> 00:08:26,130
OK, not to run the test now.

108
00:08:30,310 --> 00:08:31,140
Perfect.

109
00:08:32,020 --> 00:08:33,850
Now we're going to run every single test.

110
00:08:40,100 --> 00:08:45,020
They all passed, and that gives me great confidence that we implemented all of the meaningful logic

111
00:08:45,020 --> 00:08:46,070
without any bugs.

112
00:08:46,370 --> 00:08:47,090
That's perfect.

113
00:08:47,390 --> 00:08:51,890
We unit tested every single piece of behavior from the requirements and as long as every single test

114
00:08:51,890 --> 00:08:56,120
passes, I can rest assured every method is working the way it should.

115
00:08:56,690 --> 00:08:58,400
All right, let's move on to part four.

