1
00:00:00,460 --> 00:00:03,400
In this workbook, we're going to monitor the thread states.

2
00:00:03,430 --> 00:00:06,640
First, we're going to place comments on this scanner related code.

3
00:00:07,450 --> 00:00:11,650
And now from the main thread, we're going to print the state of threat to when it's new.

4
00:00:12,160 --> 00:00:13,270
So here's what I'll say.

5
00:00:13,450 --> 00:00:16,030
Or before the thread starts, we'll have to print.

6
00:00:17,210 --> 00:00:19,430
Threat to get states.

7
00:00:20,960 --> 00:00:21,950
Now, not that.

8
00:00:23,440 --> 00:00:24,700
And if we run the application.

9
00:00:26,300 --> 00:00:30,290
The threat has yet to be created at this point in the runtime, so at this point it is new.

10
00:00:31,070 --> 00:00:33,860
But after we start the thread, if we print the state here.

11
00:00:36,820 --> 00:00:37,840
It's currently running.

12
00:00:38,380 --> 00:00:38,740
OK.

13
00:00:40,130 --> 00:00:47,310
Now, for a task for we want to print the state of thread to when it's terminated, and the requirement

14
00:00:47,310 --> 00:00:52,800
was that we can only sleep the main thread for 10 seconds or 10 milliseconds, I should say.

15
00:00:53,550 --> 00:01:00,930
If I do that thread, not sleep, if I sleep the main thread for a 10 milliseconds and then after sleeping

16
00:01:00,930 --> 00:01:01,470
the thread.

17
00:01:03,680 --> 00:01:08,270
Printing the state of threat to war that give threat to enough time to finish.

18
00:01:09,860 --> 00:01:10,430
I wonder.

19
00:01:11,150 --> 00:01:13,610
Oh, it throws and interrupted exception.

20
00:01:13,850 --> 00:01:16,190
So we're going to have to catch this exception as well.

21
00:01:16,650 --> 00:01:20,800
Catch interrupted exception in case the main thread gets interrupted.

22
00:01:22,850 --> 00:01:25,130
We're going to print the exceptions message.

23
00:01:27,010 --> 00:01:29,020
OK, if we run the code.

24
00:01:31,320 --> 00:01:34,050
And it's still a runnable at this point.

25
00:01:34,440 --> 00:01:39,690
So even though we slept the main thread for 10 milliseconds, Thread two was still running.

26
00:01:40,530 --> 00:01:44,370
Clearly, this task takes a lot more than 10 milliseconds to process.

27
00:01:44,790 --> 00:01:47,790
So what we need to do is interrupt the thread right here.

28
00:01:48,660 --> 00:01:51,880
We're going to say thread to interrupt.

29
00:01:52,650 --> 00:01:54,630
And as soon as we interrupt, thread to.

30
00:01:56,920 --> 00:02:03,070
We need to stop this function from performing its task, so we'll say if the current thread that's running

31
00:02:03,070 --> 00:02:08,229
this code, if it's interrupted, then just return right away and just, you know, return zero.

32
00:02:10,860 --> 00:02:11,910
What's wrong one?

33
00:02:16,090 --> 00:02:20,500
And now it should definitely not take more than 10 milliseconds for this to run.

34
00:02:20,920 --> 00:02:24,400
So the tasks should be relatively short.

35
00:02:25,570 --> 00:02:26,260
Nice.

36
00:02:26,290 --> 00:02:31,240
And at this point, it's runnable, and at this point it's terminated.

37
00:02:31,300 --> 00:02:32,050
Perfect.

38
00:02:33,100 --> 00:02:40,480
OK, now in preparation for part three, what I want you to do is Command Z Mac or Control Z Windows.

39
00:02:40,780 --> 00:02:42,970
Everything we did for this workbook.

40
00:02:45,470 --> 00:02:50,630
This was only for knowledge purposes we're not going to be going through with it in the remaining exercises.

41
00:02:51,410 --> 00:02:53,990
So until your scanner code gets on, commented.

42
00:02:56,230 --> 00:02:59,050
Keep reversing your changes and voila.

