1 00:00:00,830 --> 00:00:09,770 Now, to do the integration with GNS3 on my VM and this is my NPM VM, I'm going to change the 2 00:00:09,770 --> 00:00:15,170 network adapter to use VM Net1 host only. 3 00:00:16,410 --> 00:00:27,570 On my physical machine, I have 2 VM net adapters, VM Net1 and VM Net8 previously my virtual 4 00:00:27,570 --> 00:00:34,830 machine was bridged to the physical adapter, but to allow it to be controlled by GNS3, 5 00:00:35,280 --> 00:00:39,150 I'm going to change it to VM net1 host only. 6 00:00:39,870 --> 00:00:50,760 I'm also going to change firewall settings and turn off the firewall so that I can ping the virtual 7 00:00:50,760 --> 00:00:53,820 machine from my GNS3 routers 8 00:00:54,480 --> 00:00:57,540 that'll just make it easier in the lab to do testing. 9 00:00:59,530 --> 00:01:06,210 What I also need to do is shut down the virtual machine so that GNS3 can control it. 10 00:01:07,090 --> 00:01:10,260 So once again, I've shut the machine down. 11 00:01:10,800 --> 00:01:16,450 I've gone to network adapter settings and set it to use host-only 12 00:01:18,560 --> 00:01:24,440 and I've disabled the firewall, what I'll do now is take a snapshot. 13 00:01:26,170 --> 00:01:34,540 So that I can revert to it if there are any problems, so NPM installed, I did that quickly and made 14 00:01:34,540 --> 00:01:35,170 a mistake. 15 00:01:35,170 --> 00:01:36,460 So I'll go to VM 16 00:01:37,830 --> 00:01:43,170 snapshot manager and change the name to NPM installed. 17 00:01:46,290 --> 00:01:49,680 So now let's configure GNS3 and do the integration. 18 00:01:50,990 --> 00:01:59,870 So I'm going to start up GNS3 in windows in this case because I'm using the GNS3 VM it boots 19 00:02:02,190 --> 00:02:08,699 So you can see my VM is booting up, it's now successfully booted up and GNS3 then tells me 20 00:02:08,699 --> 00:02:13,320 I can create a project, so I'm going to call this NPM 1. 21 00:02:16,450 --> 00:02:24,310 Now, to integrate the NPM virtual machine with GNS3, I need to go to edit preferences in GNS 22 00:02:24,730 --> 00:02:25,090 3 23 00:02:26,520 --> 00:02:33,640 and I'm going to select VMware VMs because I'm using VMware workstation rather than virtual box. 24 00:02:34,020 --> 00:02:35,100 I'm going to click new, 25 00:02:37,590 --> 00:02:44,400 and in the VM list I can see my NPM virtual machine, I'm going to click finish and now I'm going 26 00:02:44,400 --> 00:02:45,300 to click edit. 27 00:02:47,710 --> 00:02:55,600 Go to network and check this option, allow login is free to use any configured VMware adapter. 28 00:02:57,870 --> 00:03:06,240 I'm going to leave other settings at their defaults and click OK and click, OK, so what I've now done 29 00:03:06,240 --> 00:03:15,240 is integrated NPM with GNS3 and I can build a topology consisting of routers and NPM. 30 00:03:16,920 --> 00:03:22,010 In the next few videos, I'm going to show you how to integrate GNS3 and NPM. 31 00:03:23,040 --> 00:03:29,910 Now, in this example, I'm using, the GNS3 VM because it's the recommended way of running GNS 32 00:03:29,910 --> 00:03:30,270 3. 33 00:03:31,620 --> 00:03:40,310 It also makes sense in this example, because I'm running NPM on a Windows seven VM within VMware workstation, 34 00:03:40,890 --> 00:03:49,980 So I've got both NPM running in windows and GNS3 running within the GNS3 VM within VMware 35 00:03:49,980 --> 00:03:50,730 workstation. 36 00:03:52,200 --> 00:03:59,880 The initial topology that we're going to build consists of three routers connected via serial interfaces 37 00:04:00,090 --> 00:04:08,070 and we'll advertise routes between these routers using EIGRP will also configure an out-of-band management 38 00:04:08,070 --> 00:04:16,890 network and connect NPM to the out-of-band Ethernet network to allow NPM to manage the routers. 39 00:04:18,980 --> 00:04:23,780 So to build our GNS3 topology, I'm going to drag 3 routers 40 00:04:25,050 --> 00:04:26,130 to the workspace 41 00:04:30,360 --> 00:04:32,520 as well as drag an Ethernet switch 42 00:04:34,300 --> 00:04:38,980 to the workspace, and I'm going to run to these in the GNS3 VM. 43 00:04:42,270 --> 00:04:48,540 I'll cable up the routers using the serial interfaces. 44 00:04:56,370 --> 00:04:57,150 So 45 00:04:58,400 --> 00:05:01,520 connect the routers via the serial interfaces. 46 00:05:02,510 --> 00:05:07,220 I'll zoom in and let's view the interface labels. 47 00:05:09,910 --> 00:05:18,820 Serial 0 is connected to serial 0 on router 2, serial 0 on router 1 is connected to serial 0 48 00:05:19,450 --> 00:05:26,500 on router 2, serial 0/1 is connected to serial 0/0 on router 3. 49 00:05:28,170 --> 00:05:34,800 We'll also connect FastEthernet interfaces on each router to the Ethernet switch. 50 00:05:36,610 --> 00:05:39,940 This is going to be used for our management network. 51 00:05:48,920 --> 00:05:52,910 So there are interfaces on the switch 52 00:05:53,830 --> 00:06:02,050 and interfaces on the routers. I'll now bring NPM into the topology 53 00:06:04,110 --> 00:06:11,790 and I'm going to connect that via the Ethernet interface to port 4 on the Ethernet switch. 54 00:06:14,880 --> 00:06:22,560 So this allows NPM to manage the road is using the out-of-band management network, I'll configure the 55 00:06:22,560 --> 00:06:29,430 routers with IP addresses on the serial interfaces first and enable routing and then I'll configure 56 00:06:29,430 --> 00:06:30,660 the management interface.