In this a lab you need to configure both static and dynamic net.
You need to configure the network so that a host on the Internet can access servers on the internal
network.
And you need to configure the network so that hosts on the inside or internal network can access servers
on the internet.
Configure the router with these details and then configure static NAT so that this PC on the outside
can access the HTTP and FTP server.
Based on these details.
HTTP server external IP address is 82.282.82. 200.
FTP server is 82.8.82.21.
You can see the IP addresses of the servers by looking at the server configuration.
In addition, you need to configure dynamic Nat using the Router's external IP address so that internal
hosts are netted to this IP address.
Using port address translation on the interface.
And then you need to verify that the internal PCs can access the internet servers using their DNS names.
So as an example, Cisco dot com and Facebook.com.
So in summary, this PC should be able to access both the HTTP and FTP server using the DNS name my
HTTP Ecom and my FTP com.
And this PC should be able to access Cisco dot com and facebook.com using the domain names.
Verify that these two PCs can open up a web browsers to both Cisco and Facebook and verify that the
outside PC can open up a web browser to the HTTP server and an FTP connection to the FTP server.
So can you complete this lab?
Download the attached packet, trace a file and see if you can complete the lab yourself.
If you're unsure.
Have a look at the next video where I complete the lab.